Page 1
C A R D I O P E R F E C T AMBULATORY BLOOD PRESSURE MONITORING Q U I C K S T A R T G U I D E ABP M 7 100...
Page 2
CAUTION During a defibrillator discharge the device must not be allowed to touch the patient. The device can be damaged from the Install two fresh AA batteries into the ABPM 7100 device. discharge and give inaccurate measurements. Connect the PC interface cable to the USB port on the computer.
Page 3
(See Sizing chart.) Select Read measurements. If prompted, select ABPM 7100 and click OK. Note If there is no response from the hardware, click cancel and mini- mize the CardioPerfect Workstation window. Follow the steps in the section “Communicate with the device”...