Sound Power Level; Sound Pressure Level; Vibration Level; Safety And Instructional Decals - Toro Greensmaster Flex 1800 Operator's Manual

guards can lead to thrown object injuries. Do not resume
mowing until the area is cleared.
Maintenance and Storage
•
Check all fuel lines for tightness and wear on a regular
basis. Tighten or repair them as needed.
•
If the engine must be running to perform a maintenance
adjustment, keep hands, feet, clothing, and any parts of
the body away from the cutting unit, attachments and any
moving parts. Keep everyone away.
•
To ensure safety and accuracy, have an Authorized Toro
Distributor check the maximum engine speed with a
tachometer. Maximum governed engine speed should
be 3190-3340 RPM.
•
If major repairs are ever needed or if assistance is desired,
contact an Authorized Toro Distributor.
•
Use only Toro-approved attachments and replacement
parts. The warranty may be voided if used with
unapproved attachments.

Sound Power Level

•
Model 04040:
This unit has a guaranteed sound power level of 96 dBA,
which includes an Uncertainty Value (K) of 1 dBA.
Sound power level was determined according to the
procedures outlined in EN 11094.
•
Model 04041:
This unit has a guaranteed sound power level of 95 dBA,
which includes an Uncertainty Value (K) of 1 dBA.
Sound power level was determined according to the
procedures outlined in EN 11094.

Safety and Instructional Decals

Safety decals and instructions are easily visible to the operator and are located near any area of potential
danger. Replace any decal that is damaged or lost.
1. Lower the lever to disengage the traction.
120-9571

Sound Pressure Level

•
Model 04040:
This unit has a sound pressure level at the operator's ear
of 84 dBA, which includes an Uncertainty Value (K) of
1 dBA.
Sound pressure level was determined according to the
procedures outlined in EN 836.
•
Model 04041:
This unit has a sound pressure level at the operator's ear
of 87 dBA, which includes an Uncertainty Value (K) of
1 dBA.
Sound pressure level was determined according to the
procedures outlined in EN 836.

Vibration Level

Hand-Arm
•
Model 04040:
Measured vibration level for right hand = 2.86 m/s
Measured vibration level for left hand = 3.24 m/s
Uncertainty Value (K) = 1.6 m/s
•
Model 04041:
Measured vibration level for right hand = 3.16 m/s
Measured vibration level for left hand = 2.73 m/s
Uncertainty Value (K) = 1.6 m/s
Measured values were determined according to the procedures
outlined in EN 836.
1. Warning—stay away from moving parts, keep all guards
and shields in place.
6
2
2
120-9570
2
2
2
2