Inserting A Memory Card - Magellan MiVue 6 series User Manual

Inserting a memory card

You must insert a memory card before you can start recording. Depending on the
model, your recorder may have two memory card slots. In this case always insert the
primary memory card into Slot 1 and then the second card (if available) into Slot 2.
The recorded files are stored to the card in Slot 1; the card in Slot 2 is for you to back
up files manually.
1. Hold the card by the edges and gently insert it into the slot with the label facing
the rear side of the recorder.
2. To remove the card, gently push the top edge of the card inwards to release it,
and pull it out of the slot.
CAUTION:
ƒ DO NOT apply pressure to the center of the memory card.
ƒ Use a Class 10 memory card with at least 8GB capacity. The recorder supports
memory cards with up to 128GB capacity.
ƒ Magellan does not guarantee the product's compatibility with memory cards
from all manufacturers.
ƒ Before you start recording, please format the memory card to avoid malfunc-
tion caused by files not created by the recorder. (Format by selecting Settings
Menu > Format).
ƒ Please turn the device off before removing the memory card.
6