Before enabling Park mode please check your device memory storage allocation.
Go to
>
Changing the allocation will erase the memory card so save any videos or photos
to your computer first.
When the Parking mode detection is enabled the system will enter Parking mode
when you:
- disconnect the device's power (e.g. the vehicle engine is stopped or the power
cable is disconnected) or when the car stops moving for about 5 minutes*; or
- tap
to manually start Parking mode while continuous recording is in prog-
ress.
* The feature is triggered by the G sensor of the device. You can change the con-
figuration by tapping
To stop Parking mode and resume continuous recording, tap
If movements were detected and recorded during Parking mode you will be asked
to playback the video when you stop Parking mode.
The parking recordings can be found in the "Parking" category for file playback.
Camera mode
You can take a photo by:
- tapping
- tapping
The photos can be found in the "Photo" category for file playback.
>
>
>
>
>
while the recording is in progress; or
>
>
.
to set a proper allocation for parking recording.
>
.
.
13