TP-Link RE210 User Manual page 38

2) Try to obtain an IP address and gateway; if succeed, open your web-browser, enter the
default domain
If you are unable to log in, please Reset the device, and then use the default IP address
to get into the web-based configuration page, reconfigure the device.
3) Feel free to contact our technical support, if the problem still persists.
T4. How can I know that my wireless signal has been repeated and boosted by RE210?
An easy way is to compare the signal strength of your target wireless network (symbolized by
its SSID), with RE210 in operation vs. out of operation. Before comparison, you'd better make
sure your computer can obtain an IP address from your target wireless network and thus
access the Internet, either via RE210 or without.
T5. Will the Range Extender work if I connect the Ethernet port of it to the router via
Ethernet cable?
Sorry, it won't work. The Range Extender is designed to connect wirelessly to the router, while
the Ethernet port is designed to connect with a wired device, like Internet TV, Gaming console,
DVR and so on.
T6. Why does the wireless transmission rate speed down, while the wireless signal is
stronger after repeated by RE210?
In compliance with the wireless transmission protocol, all the Range Extender devices are set
to work in half-duplex instead of full-duplex mode. In other words, the Range Extender has to
process one-way communication between your root Wireless Router or AP and the terminal
clients; so the transmission time will be double-increased, while the speed will be decreased.
TP-LINK recommends that you connect to the Range Extender when your home network
connection is poor, or when you want a larger wireless coverage to eliminate "dead zones".
RE210
http://tplinkrepeater.net
AC750 WiFi Range Extender User Guide
in the address field and get logged in.
30