Charging - Epson Runsense SF-110 User Manual

Charging

c Important:
O Charge this product when using it for the
first time.
O Charge in an environment where the
surrounding temperature is 5 to 35°C. In any
other environment the following charge error
screen is displayed, and charging stops. When
it returns to a suitable temperature, charging
resumes.
1
Connect the cradle using one of the following
methods:
O Using a computer
Connect the cradle's USB plug to the
computer's USB port.
This is not guaranteed to work with all
computers. Do not use a USB hub. Connect
the cradle directly to the computer.
O Using an AC adapter
Connect the cradle's USB plug to the AC
adapter's USB port.
We recommend using the optional AC
adapter (model no. SFAC04/part no.
E12E204001). If you do not use a supported
AC adapter, you may not be able to charge
the product or it may not operate correctly.
Setting up your SF-110
2
Place the product into the cradle.
Check that the contact points on the product are
pointing up and match the contact marks on the
cradle.
After placing the product into the bottom of the
cradle with the LCD screen facing out, push
carefully on the top of the product until it clicks
into place.
c
When the product is placed in the correct
direction, the alarm sounds, the charging screen
is displayed, and charging starts.
A full charge normally takes approximately 2.5
to 3.5 hours, but charging time may vary.
When the battery icon on the LCD screen
displays 100%, charging is complete.
15
Important:
Make sure the product is placed in the
correct direction; otherwise, the product or
the cradle could be damaged.