Using The Sleep Timer - Yamaha R-N301 Owner's Manual

Playback
■ Adjusting the BASS and TREBLE
controls
STANDBY/ON
DISPLAY FM MODE MEMORY
BASS
PHONES SPEAKERS
A B
BASS
The BASS +/– and TREBLE +/– adjust high and low
frequency response.
When you adjust to "0", produces a flat response.
BASS
Increases or decreases the low frequency response.
Control range: –10 to +10 (20 Hz)
TREBLE
Increases or decreases the high frequency response.
Control range: –10 to +10 (20 kHz)
y
BASS and TREBLE can be adjusted in the "Setup" menu (p.32).
■ Adjusting the speaker balance
The sound output balance of the left and right speakers to
compensate for sound imbalance caused by speaker
locations or listening room conditions.
To adjust the speaker balance, perform the following
steps.
POP-UP MENU
Cursor keys
B / C / D / E
ENTER
SETUP
SETUP
1
Press SETUP on the remote control.
The "Setup" menu shown on the front display.
Setup
¡Network¡Setup
2
Press B/C to select "Balance" and press ENTER.
Balance
¡L------------R›
16
En
FM/AM PRESET TUNING
VOLUME
SELECT
TREBLE INPUT PUSH - ENTER
RETURN
TREBLE
HOME NOW PLAYING
ENTER
RETURN
MUTE
VOLUME
SP A
SP A
3
Press D/E to adjust speaker balance.
Control range: L+10 to R+10
4
To exit from the "Setup" menu, press SETUP
again.

Using the sleep timer

Use this feature to automatically set this unit to standby
mode after a certain amount of time. The sleep timer is
useful when you are going to sleep while this unit is
playing or recording a source.
DIMMER
A
COAXIAL
LINE 1
MODE
Note
The sleep timer can only be set with the remote control.
1
Press SLEEP repeatedly to set the amount of
time before this unit is set to standby mode.
Each time you press SLEEP, the front display
changes as shown below.
The SLEEP indicator blinks while setting the amount
of time for the sleep timer.
Sleep¡120min.
If the sleep timer is set, the SLEEP indicator on the
front display lights up.
y
• To disable the sleep timer, select "Sleep Off".
• The sleep timer setting can also be canceled by pressing
A (power) to set this unit to standby mode.
SLEEP
A
(power)
B
SLEEP
SPEAKERS
OPTICAL NET
LINE 2 LINE 3
TUNER CD
SP A P A
SLEEP SLEEP SLEEP
n.