After use, return the hex wrench to the
To prevent the trigger from being acciden-
lock-off lever is provided
To start the tool, slide the lock-off lever
in the direction of the arrow and pull the
trigger. Release the trigger to stop.
Before inserting the battery cartridge into the tool, always check to see that the trigger
switch actuates properly and returns to the "OFF" position when released.
Turn the tool on and wait until the blade attains full speed. Then press the shoe against
the workpiece and apply pressure to cut the workpiece.
Be sure to wear gloves during operation.
Excessive pressure that causes bending or twisting of the blade may snap