ECS A75F-M User Manual page 47

Trusted Computing
Scroll to this item and press <Enter> to view the following screen:
Main Advanced
Configuration
TPM Support
TPM State
Pending TPM operation
Current TPM Status Information
TPM Enabled Status:
TPM Active Status:
TPM Owner Status:
TPM Support (Enabled)
This item enables or disables TPM(Trusted Platform Module) support for system
security and data integrity. If this option is set to Enabled, the following items will
display.
TPM State (Disabled)
Select Enabled to display the status of TPM support for this system. Please note that
a system reboot is needed before a change on the TPM state to take effect.
Pending TPM operation (None)
Use this item to schedule a TPM operation that is pending.
is displayed, there is no pending TPM operation in the queue. Please note that a
system reboot is needed for any change on the feature to become effective.
Current TPM Status Information
This feature displays the current status of the TPM items listed below.
TPM Enabled Status
This item indicates if TPM support is enabled or not in this system.
TPM Active Status
This item indicates if TPM support is active or not in this system.
TPM Owner State
This feature lists the status of the TPM Owner.
Chipset M.I.B III
Enabled
Disabled
None
Disabled
Deactivated
UnOwned
Using BIOS
Boot Security
Enabled or Disabled BIOS
support for security
device. O.S. will not show
Secutity Device. TCG EFI
protocol and INTIA
Interface will not be
available.
: Select Screen
/Click: Select Item
Enter/Dbl Click : Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
If the option "None"
43
Save & Exit