ECS A75F-M User Manual page 22

Table of Contents

Advertisement

18
F_USB1~3: Front Panel USB 2.0 headers
The motherboard has six USB 2.0 ports installed on the rear edge I/O port array.
Additionally, some computer cases have USB 2.0 ports at the front of the case. If you
have this kind of case, use auxiliary USB 2.0 connector to connect the front-
mounted ports to the motherboard.
Unlike F_USB2~3 in this mainboard, F_USB1 supports EZ Charger technology,
provides 3 times current than general USB port in off mode for USB devices. It is
useful and excellent, especially for the iPhone, iPad and iPod touch devices that need
a large amount of current for faster recharging within less time.
Pin
1
2
3
4
5
6
7
8
9
10
Please make sure that the USB cable has the same pin assignment as
indicated above. A different pin assignment may cause damage or system
hang-up.
F_AUDIO: Front Panel Audio header
This header allows the user to install auxiliary front-oriented microphone and line-
out ports for easier access.
Pin
Pin
1
3
5
7
9
CASE: Chassis Intrusion Detect Header
This detects if the chassis cover has been removed. This function needs a chassis
equipped with instrusion detection switch and needs to be enabled in BIOS.
Pin 1-2
Short Chassis cover is removed
Open Chassis cover is closed
Signal Name
USBPWR
Front Panel USB Power
USBPWR
Front Panel USB Power
USB_FP_P0-
USB Port 0 Negative Signal
USB_FP_P1-
USB Port 1 Negative Signal
USB_FP_P0+
USB Port 0 Positive Signal
USB_FP_P1+
USB Port 1 Positive Signal
GND
Ground
GND
Ground
Key
No pin
GND
Ground
Signal Name
Pin
Signal Name
2
PORT 1L
4
PORT 1R
6
PORT 2R
8
SENSE_SEND
10
PORT 2L
Function
Installing the Motherboard
Function
Signal Name
Function
AUD_GND
PRESENCE#
SENSE1_RETURN
KEY
SENSE2_RETURN

Advertisement

Table of Contents
loading

Table of Contents