Philips 105G7 Series Service Manual page 11

http://jdwxzlw.5d6d.com/?fromuser=华盛维修
RELATIVE PLACEMENT OF TYPICAL COMPONENTS
Convergence adjustment
A. Produce a magenta crosshatch on the display.
B. Adjust the focus for the best overall focus on the display.
Also adjust the brightness to the desired condition.
C. Vertical red and blue lines are converged by varying the angle between the two tabs of the 4 pole
magnets on the PCM assembly. (See above diagrams)
D. Horizontal red and blue lines are converged by varying the two tabs together, keeping the angle
between them constant.
E. Produce a white crosshatch pattern on the display.
F. Vertical green and magenta lines are converged by varying the angle between the two tabs of the 6-
pole magnets.
G. Horizontal green and magenta lines are converged by varying the two tabs together, keeping the angle
between them constant.
家电维修资料网，免费下载各种维修资料
Purity Magnets
6-pole Convergence Magnets
4-pole Convergence Magnets
Deflection Yoke
10