iBall Baton iB-WRB150N User Manual page 37

2) Select the iB-WRH150N-2's SSID from the list and click OK on the
appearing dialogue box; iB-WRH150N-2's MAC address, SSID and
channel settings will be automatically added to the iBl-WRH150N-1
3) Click OK to save your settings.
4) Configure wireless security settings. For this step, refer to section 5.2
hereof.
5) Repeat steps 1-4 on iB-WRH150N-2. After the 2 routers have added
each other's MAC address and share the same SSID, channel, security
settings and security key, the WDS feature can be implemented.
Note:
1. WDS feature can be implemented only between 2 wireless devices that both
support the WDS feature. Plus, SSID, channel, security settings and security key
must be the same on both devices. Using the Open Scan option and selecting link
partner from the scan list automatically change the router's existing SSID and
channel settings respectively to those of link partner as well as add link partner's
MAC address. So we recommend you to use this Open Scan option for easy WDS
settings.
2. Using WEP encryption improves WDS compatibility. For this reason, we
recommend you to encrypt your wireless network with WEP when using the WDS
feature.
150M Wireless-N Broadband Router
36
(iB-WRB150N)