Remote Connectors; Others; General - Sony SRP-X500P Operating Instructions Manual

Signal format
RGB/component
Level Video signal: 0.7 Vp-p
Sync signal: 1 to 5 V
Video signal: 75 Ω
Impedance
Sync signal: 47 kΩ
OUTPUT VIDEO
Connector shape
Phono jack
Signal format
Composite
Level 1 Vp-p
75 Ω
Impedance

Remote connectors

PROJECTOR CONTROL
RS-232C: D-sub, 9-pin (male)
CONTROL S IN/OUT:
Mini jack
REMOTE
PARALLEL: D-sub 25-pin (female)
Input pins: Make contact input
Logic: C-MOS LEVEL active L
Input pulse width: 100 msec or more
Output pins: Open collector output
Withstand voltage: +24 V or less
Maximum sink current: 40 mA
RS-232C: D-sub 9-pin (male)

Others

ANT IN a/b connectors
BNC-type, supplies +9 V DC
+48V power supply
Supplies power to MIC INPUT 1 to 4
connectors (XLR-type) (only when
+48V ON/OFF selector is set to ON)

General

Power requirement
Model for the U.S.A and Canada:
AC 120 V, 60 Hz
Model for other countries:
AC 230 V, 50/60 Hz
Power consumption
120 W
Peak inrush current (model for Europe)
(1)Power ON, current probe method:
6 A (240 V)
(2)Hot switching inrush current,
measured in accordance with
32
Specifications
European standard EN55103-1: 5 A
(230 V)
Dimensions 482 × 132 × 357 mm (w/h/d) (19 × 5
× 14 inches) (excluding protrusions)
Mass Approx. 12 kg (26 lb. 3 oz.)
Operating temperature
0°C to 40°C (32°F to 104°F)
Storage temperature
–20°C to 60°C (–4°F to 140°F)
Supplied accessories
Power cord (1)
Foot (4)
CD-ROM (1)
Operating instructions (1)
Antenna (2)
Optional accessories
AN-820 UHF Antenna
WRU-806 UHF Synthesizer Tuner Unit
UWP-X7/X8 Wireless Microphone
System
Design and specifications are subject to change without
notice.
Note
Always verify that the unit is operating properly before
use. SONY WILL NOT BE LIABLE FOR DAMAGES
OF ANY KIND INCLUDING, BUT NOT LIMITED
TO, COMPENSATION OR REIMBURSEMENT ON
ACCOUNT OF THE LOSS OF PRESENT OR
PROSPECTIVE PROFITS DUE TO FAILURE OF
THIS UNIT, EITHER DURING THE WARRANTY
PERIOD OR AFTER EXPIRATION OF THE
WARRANTY, OR FOR ANY OTHER REASON
WHATSOEVER.
1
/
4