Buzzer; Keypad Tone; Brightness; Contrast - Miele T 8001 WP SUPERTRONIC Operating Instructions Manual

Settings menu

Buzzer

When the buzzer function has been
activated, an audible tone sounds at
the end of the programme.
Off
Factory default
The buzzer is switched off but sounds
at maximum volume if there is a fault.
Normal
The buzzer sounds at the end of the
programme.
Loud
The buzzer sounds more loudly at the
end of the programme.

Keypad tone

An audible tone sounds each time a
button is pressed.
Off
Factory default
On

Brightness

Contrast

You can adjust both the contrast and
the brightness of the display in steps.
P P P P P P P
The bars
setting.
68
You can see the change in the setting
as soon as it has been selected.

Display / Keypad illumination

The display and the sensors will always
go out
– if a programme is not selected within
– 10 minutes after the end of a
Pressing the Start sensor will switch on
the display and sensor lighting again.
Off after 10 minutes
The display and sensor lighting will go
out 10 minutes after the start of a
programme.
"On" whilst programme is running
Factory default
The display and the sensors remain
switched on during the course of the
programme.
show you the
To save energy, the display lighting
and the sensors are switched off and
the Start sensor flashes slowly.
10 minutes of the machine being
switched on.
programme.