Cleaning and care
Surfaces of the fluff filters
Cleaning intervals
Clean the surfaces of the fluff filters
in the door and the door opening
after each drying programme.
Cleaning without water
Tip: You can use a vacuum cleaner to
remove the fluff.
1 Fluff filter
2 Seal
^ Open the door and pull the fluff filter
(1) out of the door as illustrated.
^ Remove any fluff from the hollow part
of the door with a bottle brush or a
vacuum cleaner.
^ Also clean the door seal (2) with a
damp cloth.
40
^ Use your fingers or a vacuum cleaner
to remove the fluff from the surface of
the filter.
^ Use your fingers or a vacuum cleaner
to remove the fluff from the two fluff
filters in the door opening.
^ Push the filter back into the door
holder until it clicks into position.
Ensure it is facing the correct way.
^ Close the door.