Makita DA4030 Instruction Manual page 8

2
3
4
1. Mark
2. Motor housing
3. Lock button
4. Handle
ASSEMBLY
1
1. Side grip
8
change knob positioned halfway between the position 1
and the position 2, the tool may be damaged.
Torque limiter
For Model DA4031 only
The torque limiter will actuate when a certain torque level is
reached (for lower speed setting: position 1). The motor will
disengage from the output shaft. When this happens, the bit
will stop turning.
Switch handle mounting positions
003034
1
The switch handle can be rotated to either 90° left or right to
fit your work needs. First, unplug the tool. Press the lock but-
ton and rotate the switch handle until the
button is aligned with that on the motor housing. The switch
handle will be locked in that position.
CAUTION:
• Always be sure that the tool is switched off and
unplugged before carrying out any work on the tool.
Installing side grip (auxiliary handle)
003041
CAUTION:
• Always be sure that the side grip is installed securely
before operation.
Screw the side grip on the tool securely. The side grip can be
installed on either side of the tool, whichever is convenient.
mark on the lock