Makita DA4030 Instruction Manual

13 mm (1/2”) angle drill
Hide thumbs Also See for DA4030:


Angle Drill
13 mm (1/2")
13 mm (1/2")
For your personal safety, READ and UNDERSTAND before using.
w w w . m a k i t a t o o l s . c o m


Table of Contents

Summary of Contents for Makita DA4030

  • Page 1 Angle Drill 13 mm (1/2”) MODEL DA4030 13 mm (1/2”) MODEL DA4031 I N S T R U C T I O N WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. w w w . m a k i t a t o o l s . c o m...
  • Page 2: Specifications

    1. Keep your work area clean and well lit. Cluttered benches and dark areas invite acci- dents. 2. Do not operate power tools in explosive atmospheres, such as in the presence of DA4030 Auger bit 38 mm (1-1/2”) Self-feed bit 65 mm (2-9/16”)
  • Page 3: Electrical Safety

    Electrical Safety 4. Double insulated tools are equipped with a polarized plug (one blade is wider than the other.) This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified elec- trician to install a polarized outlet.
  • Page 4: Specific Safety Rules

    Not More Than SPECIFIC SAFETY RULES DO NOT let comfort or familiarity with product (gained from repeated use) replace strict adherence to drill safety rules. If you use this tool unsafely or incorrectly, you can suffer serious personal injury. 1. Hold tool by insulated gripping surfaces...
  • Page 5 5. Do not leave the tool running. Operate the tool only when hand-held. 6. Do not touch the drill bit or the workpiece immediately after operation; they may be extremely hot and could burn your skin. SAVE THESE INSTRUCTIONS WARNING: MISUSE or failure to follow the safety rules stated in this instruction manual may cause serious personal injury.
  • Page 6 SYMBOLS The followings show the symbols used for tool. V ... volts A ... amperes Hz ... hertz ... alternating current ... no load speed ˚ ... Class II Construction .../min... revolutions or reciprocation per minute USD201-2...
  • Page 7: Functional Description

    FUNCTIONAL DESCRIPTION 003021 1. Switch trigger 003028 1. Reversing switch lever 003031 1. Pointer 2. Speed change knob 3. Lock button CAUTION: • Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool.
  • Page 8 003034 1. Mark 2. Motor housing 3. Lock button 4. Handle ASSEMBLY 003041 1. Side grip change knob positioned halfway between the position 1 and the position 2, the tool may be damaged. Torque limiter For Model DA4031 only The torque limiter will actuate when a certain torque level is reached (for lower speed setting: position 1).
  • Page 9 • Do not fix the spade grip beyond the limits of the arrow. Be cautious that your hand is not caught in the grip. Keep the hand away from the drill chuck. They can lead to serious accidents. • Always be sure that the hex bolts (both sides) of the spade grip are tightened securely.
  • Page 10: Operation

    OPERATION 003078 1. Reaction 2. Forward 3. Spade grip 4. Handle 003079 1. Reaction 2. Reverse Holding tool CAUTION: • This is a powerful tool. High torque is developed and it is important that the tool should be securely held and properly braced.
  • Page 11: Maintenance

    To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts.
  • Page 12 CAUTION: • These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose.
  • Page 13 First-Class Postage Required Post Office will not deliver without proper postage. Makita U.S.A., Inc. 14930 Northam Street La Mirada, CA 90638-5753 Fold...
  • Page 14 Paste 3. How did you learn about this product: Magazine From Dealer Newspaper Store Display Catalog 4. Most favored points are: Design Features Size Price Makita Brand MODEL NO. YEAR SERIAL NO. PHONE 20-29 30-39 40-49 Paste Paste Radio Exhibition...
  • Page 15: Factory Service Centers

    Date Purchased When you need service: Send complete tool (prepaid) to one Dealer’s Name & Address of the Makita Factory Service Centers listed, or to an Authorized Makita Service Center. Be sure to attach a letter to the outside of Model No.
  • Page 16: Warranty Policy

    MAKITA LIMITED ONE YEAR WARRANTY Warranty Policy Every Makita tool is thoroughly inspected and tested before leaving the factory. It is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase.

This manual is also suitable for:


Table of Contents