Aztech DSL5028EN(1T1R) User Manual page 23

a. WLAN Enabled. Enable or disable the wireless connection of the
device. Once the Wireless connection is disabled, you would not be
able to connect to your device wirelessly.
b. Broadcast SSID. Broadcasts or Hides the Wireless SSID. Do take note
that upon disabling the SSID broadcast, you would have to
manually input the connection details (e.g. SSID, Encryption mode,
and Password) before you can connect wirelessly to your modem
router.
c. SSID. Allows you to change the default wireless network name set
on your modem router. The default SSID can be seen on the sticker
underneath your modem router.
d. Security Mode. Allows you to change the default wireless security
set on your device. By default, the security mode is set to WPA-
PSK/WPA2-PSK.
e. Encryption Mode. Allows you to change the encryption used by
your modem router. By default, the encryption mode is set to
TKIP/AES.
f. Pre-Shared Key. Allows you to set change the wireless password set
on your modem router. The default pre-shared key can be seen on
the label sticker underneath your device.
g. Maximum Station Number. Limits the number of stations that can
connect to your modem router wirelessly. By default, a maximum of
20 devices are allowed to connect to your modem router.
User Manual
Page 23 of 28