USB and internal memory
You can connect and play music tracks from your USB
device.
You can also record sound or music tracks into the 4 GB
internal memory in ".mp3" format.
This system can play or record up to 800 folders
(maximum 999 tracks in an album) or a total of 8000
tracks, depending on the available storage capacity.
Connecting a USB device
Preparation
Before you connect a USB device to the system, make
sure you do a backup of the data.
Do not use a USB extension cable. The system cannot
recognise USB device connected through a cable.
TRACK
USB device
(not supplied)
Decrease the volume and connect the USB device to
the USB port.
Hold the main unit when connecting or disconnecting the
USB device.
USB at a glance
USB status indicator
• Play MP3 tracks.
USB A
• Record MP3 tracks to
USB B
• Record sound or music tracks.
USB B
• Play MP3 tracks.
Note:
USB status indicator blinks in red during USB
recording.
Note:
USB status indicator lights up in green when selected.
Recording to a USB device or the
internal memory
Panasonic cannot be held responsible on the action of
consumer to record copyrighted contents which can
cause copyright infringement.
Note:
• All recordings are in ".mp3" format.
• You cannot do recording when you are using random
playback mode.
• Repeat playback mode is off during recording.
• A new album is added each time you do a recording.
• The sequence of album can change after the
recording.
• The recordings are kept in a folder named
"REC_DATA" in the USB device or the internal
memory.
Basic recording
1
Select the source you want to record.
Prepare the disc playback mode.
Record all tracks
Record
programmed tracks
Record a single
track
Make sure the disc is stopped.
.
Radio
Tune in to the radio station.
External equipment
Connect and play the equipment
(Z"External equipment").
2
Press [MEMORY REC 7/9] or [USB REC 7/9] to
start recording.
The name of the folder that keeps the recording is
shown.
Stop recording Press [8]. "WRITING" is shown.
Pause
Press [MEMORY REC 7/9] or
recording
[USB REC 7/9] during recording.
Press again to continue recording.
Note:
You can pause during recording from
the radio, music port or AUX (except in
SYNCHRO mode). A track mark is
added every time you pause
(Z"Adding track marks").
Note:
• Wait for a few seconds for the system to prepare the
USB device before you start recording.
• USB status indicator blinks in red during USB
recording.
• When the next track is being recorded, it will be shown
on the display.
Select "OFF PLAYMODE"
(Z"Play menu").
Program the tracks you want
(Z"Program playback").
Select "1-TRACK"
(Z"Play menu").
9
9