Making The Connections - Panasonic SC-MAX700 Operating Instructions Manual

Making the connections

Connect the AC mains lead only after all the other connections have been made.
4
5
1
Connect the speakers.
Connect the speaker cables to the terminals of the same colour.
1a
1a
1b
2 3 3 3 3 2
2 3 3 3 3 2
2 3
1b
2
Connect the FM indoor antenna.
Put the antenna where reception is best.
Tape
3
Connect the AM loop antenna.
Stand the antenna up on its base until it clicks.
4
Set the voltage.
Use a flat-head screwdriver to set
the voltage selector to the AC
voltage in your area.
5
Connect the AC mains lead.
To household
mains socket
Do not use an AC mains lead from other equipment.
Conserving power
The system consumes approximately 0.3 W when it
is in standby mode. Disconnect the power supply if
you do not use the system.
Some settings will be lost after you disconnect the
system. You have to set them again.
B
A
5
5