Table of Contents
Advertisement
%V
Display of firmware version
AT%V
This command is used to display the firmware version of the ISDN modem.
&V
Display configuration profiles
AT&V
This command returns the current, as well as the two stored configuration
profiles, 0 and 1 (see also commands AT&W and AT*W) of the MicroLink
ISDN i.
\V
CONNECT with error-free connections
AT\V0
AT\V1
AT\V2
*AT\V8
With the setting AT\V0, call establishment messages are issued in the CON-
NECT xxxxx form.
With the setting AT\V1, call establishment messages are issued in the CON-
NECT xxxxx/REL form.
AT\V2 provides additional information regarding the correction process in
the form of CONNECT xxxxx/REL-LAPB.
With the configuration AT\V8 the call establishment messages are issued in
the CONNECT xxxxx/ISDN/X75 form.
xxxxx stands for the speed with which the connection was established.
|
AT commands: Detailed description
: No modified CONNECT messages
: Identification of connections with
error correction
: Additional distinction of correction
processes
: Detailed CONNECT messages
31
|
devolo MicroLink ISDN i
|
Advertisement
Table of Contents
