Escape Sequence - Devolo MicroLlink User Manual

28
AT commands: Detailed description
The command AT\F can be used to display and verify the stored numbers.
No further commands can be executed from the same command line after the
command AT\P.
Q Suppressing messages
*ATQ0
ATQ1
ATQ2
With this command, messages to the attached computer by the ISDN modem
can be completely suppressed (ATQ1) or suppressed in the answer mode only
(ATQ2).
*Q Message after return to transfer phase
*AT*Q0
AT*Q1
The return of the CONNECT message can be suppressed after an invalid
escape sequence with this command.
\Q Data flow control on the serial port
AT\Q0
AT\Q1
AT\Q2
|
devolo MicroLink ISDN i
|
: Return of messages from ISDN modem on
: Return of messages from ISDN modem
off
: Messages off in answer mode
: CONNECT message after invalid

escape sequence

: No CONNECT message after invalid
escape sequence
: No handshake
: Bidirectional XON/XOFF handshake
: Unidirectional CTS handshake
|