Asus B85M-G PLUS/USB 3.1 Owner's Manual page 46

2.5.1 CPU Core Ratio [Auto]
Allows you to set the CPU core ratio automatically or manually.
[Auto]
[Sync All Cores] Allows you to set CPU Core Ratio settings for all cores.
[Per Core]
The following two items appear only when you set the CPU Core Ratio to [Sync All
Cores] or [Per Core].
1-Core Ratio Limit [Auto]
Select [Auto] to apply the CPU default Turbo Ratio setting or manually assign a 1‑Core
Limit value, which should be higher than or equal to the 2‑Core Ratio Limit.
2-/3-/4-Core Ratio Limit [Auto]
These items become configurable only when you set the CPU Core Ratio item to [Per
Core].
2.5.2 Min CPU Cache Ratio [Auto]
Allows you to set the uncore ratio of the processor to its possible minimum value.
Configuration options: [Auto] [8] ~ [33].
2.5.3 Max CPU Cache Ratio [Auto]
Allows you to set the uncore ratio of the processor to its possible maximum value.
Configuration options: [Auto] [8] ~ [33].
2.5.4 BCLK Frequency : DRAM Frequency Ratio [Auto]
Allows you to set the CPU bus speed to DRAM frequency ratio.
[Auto]
[100:133]
[100:100]
2.5.5 DRAM Frequency [Auto]
Allows you to set the memory operating frequency. The configurable options vary with the
BCLK (base clock) frequency setting. Select the auto mode to apply the optimized setting.
Configuration options: [DDR3‑800MHz] [DDR3‑1066MHz] [DDR3‑1333MHz] [DDR3‑
1400MHz] [DDR3‑1600MHz]
Selecting a very high memory frequency may cause the system to become unstable! If this
happens, revert to the default setting.
2-14
Sets all CPU Core Ratio to Intel
Allows you to set CPU Core Ratio individually.
DRAM speed is set to the optimized settings.
The BCLK frequency to DRAM speed ratio is set to 100:133.
The BCLK frequency to DRAM speed ratio is set to 100:100.
CPU default settings automatically.
®
Chapter 2: Getting started