1. Manuals
  2. Brands
  3. Asoni Manuals
  4. Security Camera
  5. CAM661H
  6. User manual

Asoni CAM661H User Manual

720p hd h.264 cmos network fixed dome camera
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
720P HD H.264
CMOS Network Fixed Dome Camera
CAM661H / CAM661H-PoE
User's Manual
Date: 7/20/2012
Firmware Version: VB1.0.26

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CAM661H and is the answer not in the manual?

Questions and answers

Related Manuals for Asoni CAM661H

Summary of Contents for Asoni CAM661H

  • Page 1 720P HD H.264 CMOS Network Fixed Dome Camera CAM661H / CAM661H-PoE User’s Manual Date: 7/20/2012 Firmware Version: VB1.0.26...

  • Page 2: Table Of Contents

    Content Content ............................1 Preface ..........................3 Product Specifications ....................... 3 Product Installation ......................5 A. Hardware Installation ...................... 5 Cable Connections........................ 5 B. Monitor Setting ........................ 7 C. IP Assignment................. 錯誤! 尚未定義書籤。 Live Video .......................... 10 Configuration ........................14 A.
  • Page 3 Micro-SD Card ........................56 Network Configuration ..................... 59 A. Intranet Only ........................59 Connects to PC Directly ...................... 59 Connects to an Exist LAN ....................60 B. Internet Only ........................61 Connects to ADSL with Fixed Public IP Address ..............61 Connects to ADSL with Floating Public IP Address (PPPoE) ..........

  • Page 4: Preface

    1. Preface This camera is a 720P HD CMOS network camera which builds in web server. User views real-time video via IE browser. It supports H.264, MJPEG and MPEG4 video compression which provides smooth and high quality video. The event video can be stored in the Micro-SD card, and can be playback remotely.
  • Page 5 Ethernet 10/ 100 Base-T Network Protocol HTTP, HTTPS, TCP/IP, RTP/RTSP, UDP, 3GPP, SMTP, FTP, Samba, PPPoE, DHCP, DDNS, NTP, UPnP, SNMP, QoS/DSCP, IP Filter, IEEE 802.1x System Video Resolution 1280x800, 1280x720, 640x480, 320x240, 176x144 Compression Format H.264 / MJPEG / MPEG4 Frame Rate Up to 30FPS Triple Streaming...

  • Page 6: Product Installation

    3. Product Installation A. Hardware Installation Cable Connections  Micro-SD Card Slot (Inside of camera)  Power Jack  Network Connector  To connect the DC 12V power adapter. Power Jack:  The RJ-45 connector allows connect to the Ethernet network. Network Connector: ...
  • Page 7 4. Set up the network configurations according to the network environment. For further explanation, please refer to Network Configuration chapter.

  • Page 8: Monitor Setting

    B. Monitor Setting 1. Right-Click on the desktop. Select “Properties” Change color quality to “Highest (32bit)”.

  • Page 9: Ip Assignment

    PC must be in the same subnet. For more information about subnets, please consult your network administrator. “Asoni IP Search” is a utility that provides an easier, more efficient way to configure the IP address and network settings of the network camera in Local Network (LAN).
  • Page 10 2. IP Search searches all the network devices which connect to the intranet and lists on the window. Click [Search] button to search again. 3. From the list, click and select the device with the MAC Address that corresponds to the device that is to be configured.

  • Page 11: Live Video

    4. Live Video Start the IE browser, type the IP address of the network camera in the address field: http://<IP of camera> If the “HTTP Port” has been changed from “80”, type the URL as: http://<IP of camera>:<HTTP Port> After link to the camera, it will show a dialogue box.
  • Page 12 When popup the following dialogue box, click [Yes].
  • Page 13 The web page of the device shows as following. If you are using IE 8.0 or above, please click “Compatibility View” icon to make this web page works properly: ⑤ ① ② ③ ④ ⑥  Streaming : Select the streaming 1 or 2 from the pull-down list to display. ...
  • Page 14  Online Visitor : Shows how many users connect to this network camera.  Function Buttons : Click these buttons will perform the following functions. Original Size : Click this button to display the original size of video. Shrink View : Click this button to shrink the video to fit the window for view. Full Screen : Click this button or double-click the video, the video will change to full screen mode.

  • Page 15: Configuration

    5. Configuration Click [Configuration] button to get into the configuration page. Click [Live View] button to back to the Live-View page. A. System System Information Set up the camera name, select language, and set up the camera time. System Information...
  • Page 16 Server Information MAC Address: The MAC address of the Ethernet network card in the device. Server Name: You can type a name into this field to identify this device. Show on Status Bar: Determine whether show the server name on the Status Bar. LED Indicator: Determine whether light-on or turn-off the network and power status LEDs on the device.
  • Page 17 Time Setting Date Format: Select the format to display the date. Time Zone: Select the GMT to match your time zone. Enable Daylight Saving: If using “Daylight Saving”, enable this option and select the start and end time. Synchronize with NTP Server: Select this option and type the IP address of a NTP (Network Time Protocol) server, this device will synchronize the time with the NTP server via network.
  • Page 18 The date and time remain the same: Keep the current date and time without change. After set up, click [Apply] to save the settings.

  • Page 19: User Management

    User Management You can add, remove and manage the users in this page. This device supports 3 user groups:  Administrator: The administrator can view, operate and configure all functions and settings of this device.  Guest: The users in Guest group can only view the live video in Live-View page. ...
  • Page 20 Edit: To change the username and password, click [Edit] and modify the administrator or user in the pop-up window. Remove: To remove the user, click [Remove].

  • Page 21: System Upgrade

    System Upgrade This page allows user to upgrade firmware, restart device and restore the factory default settings. System Upgrade Firmware Upgrade The firmware can be upgraded online. To update the firmware, click [Browse…] to select the new firmware file, and then click [Upgrade] to the procedure.

  • Page 22: System Logs

    System Logs System Logs System Status Logs Click the [View] button on the right side to list the logs of system status. Motion Trigger Logs Click the [View] button on the right side to list the logs of motion detection. All Logs Click the [View] button on the right side to list all logs.

  • Page 23: Video/Audio Setting

    B. Video/Audio Setting Video Format This device supports H.264, MPEG4 and MJPEG Triple Mode and Triple Streaming, set the video parameters in this page. Video Format...
  • Page 24 Video System Select NTSC-60Hz or PAL-50Hz to match your local video system. Streaming 1 Output Setting Basic / Advanced Mode: Select the mode to configure the parameters. Advanced mode provides more detail parameters for setting. Resolution: Select the resolution from the pull-down list. ...
  • Page 25 Streaming 2 Output Setting Basic / Advanced / Close Mode: Select the mode to configure the parameters. Advanced mode provides more detail parameters for setting. Select Close mode will disable the streaming 2. Resolution: Select the resolution from the pull-down list. ...
  • Page 26 3GPP Streaming Output Setting After enable the 3GPP streaming, it will enable this device to send out the video in 3GPP format, and you can view the live video on the 3G mobile phone. Since the bandwidth of 3G is not fast usually, the 3GPP streaming will be set to the following configuration: ...
  • Page 27 After set up, click [Apply] to save the settings.

  • Page 28: Image Setting

    Image Setting Image Setting Privacy Mask For the security purpose, there are 3 areas can be setup for privacy masks, the masked areas will not be shown in Live-View and recorded file. To set up or clear the privacy mask, click [Draw/Clear Area] button, and then use mouse to drag the area...
  • Page 29 on the video. After configuration, click [Save Area Settings] button to save the settings. Image Quality Brightness / Contrast / Hue / Saturation / Sharpness: Adjust these parameters to get clear video. Automatic Gain Control: Adjust this function according to the environment. Shutter Time: ...

  • Page 30: Network Setting

    C. Network Setting Network Setting Network Setting...
  • Page 31 IP Assignment DHCP: If this device behinds a router and the router provides DHCP service, using DHCP, this device will get all network parameters from the router automatically. Static: Assign IP address, subnet mask, gateway, and DNS manually. Port Assignment Set the port if necessary.
  • Page 32 Note: Not all routers equip “UPnP Port Forwarding” function. The device will report whether this function is successful after click [Apply] button. RTSP Server Setting RTSP Server: The video stream can be direct retrieve via RTSP connection, you can close this function by disable this option. RTSP Authentication: If you select and enable this function, the remote client must meet the authentication to retrieve video stream via RTSP connection.
  • Page 33 Onvif Version: Select the version of Onvif standard, or disable the Onvif output. Security: Enable or disable the Onvif security authentication. RTSP Keepalive: If select “Enable”, when the NVC doesn’t send the command for keeping the RTSP connection, this device will terminate the RTSP connection. If select “Disable”, this device will always keep the RTSP connection.

  • Page 34: Mail / Ftp / Samba Setting

    Mail / FTP / Samba Setting To send out the event video to E-mail, FTP or Samba network storage, please set up the configuration first. Mail/FTP/Samba...
  • Page 35 Mail Setting Login Method: This device provides 2 kinds of mail settings. “Anonymous” for the mail server which doesn’t need login with user name and password. “Account” for the mail server which needs login with user name and password. Send Mail Server: The IP address or URL of the send-mail server.
  • Page 36 FTP Server: The IP address or URL of the FTP server. User Name / Password: The user name and password to log in the FTP server. FTP Port: The port of the FTP service. Default is 21. Store Path: The path to save the sent video file. FTP Mode: Select “PORT”...
  • Page 37 settings of mail, FTP or Samba network storage are correct.

  • Page 38: Pppoe / Ddns Setting

    PPPoE / DDNS Setting PPPoE/DDNS Setting PPPoE Setting If this device connects to an ADSL modem directly and want to use PPPoE connection, select [Enable] and then set the parameters in this page.
  • Page 39 Enable/ Disable: Enable or disable the PPPoE connection. User name/ Password: Input the user name and password of the PPPoE connection. Send E-mail After Dialed: If select [Enable], when connect to the Internet via PPPoE, this device will send a mail with the Subject to a specific mail account, this mail contains the public IP address of the ADSL connection.
  • Page 40 There are several DDNS providers can be selected. Select the provider from the pull-down list, input Hostname, User name, Password and the Schedule Update time, and then click [Apply] to connect to the DDNS provider. After set up, click [Apply] to save the settings. The “Status”...

  • Page 41: Network (Advance) Setting

    D. Network (Advance) Setting HTTPS Setting HTTPS (Hypertext Transfer Protocol Secure) is a combination of Hypertext Transfer Protocol (HTTP) with SSL/TLS protocol. It provides encrypted communication and secure identification of a network web server. Https can help protect streaming data transmission over the network on the higher security level.
  • Page 42 Created Request Input the secure identification and then click [Apply] to save the settings. Install Certificate There are two ways to set Certificate – “Install Signed Certificate” and “Create Self-Signed Certificate”. Input the necessary data and then click [Apply] to save the settings.

  • Page 43: Snmp Setting

    SNMP Setting SNMP (Simple Network Management Protocol) is an Internet-standard protocol for managing devices on IP networks. It is used mostly in network management systems to monitor network-attached devices for conditions that warrant administrative attention. SNMP exposes management data in the form of variables on the managed systems, which describe the system configuration.
  • Page 44 SNMPv3 To use SNMPv3, click the checkbox to enable SNMPv3, and then set Security Name, Authentication Type, Authentication Password, Encryption Type, Encryption Password of Write mode and Read mode. SNMPv1/ v2c Trap Enable “SNMPv1/ v2c Trap” can detect the Trap server. Please click the checkbox to select what event need to be detected.

  • Page 45: Ip Filter Setting

    IP Filter Setting The IP Filter function allows you to create the IP address list to manage the clients that are allowed or denied to access this device. IP Filter Setting IP Address Filter Setting Enable IP address filter: Click the checkbox to enable this function. IPv4 IP Address: Input the IP address (single or range) that will be allowed or denied to access this device.
  • Page 46 Administrator Access To always allow the administrator access this device, click the checkbox to enable this function, and the input the IP address of administrator. After set up, click [Apply] to save the settings.

  • Page 47: Qos/ Dscp Setting

    QoS/ DSCP Setting DSCP (Differentiated Services Code point) specifies a simple mechanism for classifying and managing network traffic and provide QoS (Quality of Service) on IP networks. DSCP is a 6-bit in the IP header for packet classification purpose. Please define the reserve for Live Stream, Event/ Alarm and Management.

  • Page 48: Ieee 802.1X Setting

    IEEE 802.1x Setting IEEE 802.1x is an IEEE standard for port-based Network Access Control. It provides an authentication mechanism to device wishing to attach to a LAN or WLAN. The EAPOL protocol support service identification and optional point to point encryption over the local LAN segment.

  • Page 49: Event Handling

    E. Event Handling Event Setting This device supports multiple event settings. Event...
  • Page 50 This device supports 3 kinds of event detections:  Motion Detection.  Network Disconnection Detection: This event will be triggered once the wire network is disconnected.  Specific IP Detection: This event will be triggered once the network connection with a specific IP address is disconnected. Motion Detection This device allows 3 areas for detect motion.
  • Page 51 “Set Area” row, and then use mouse to drag the area on the video. Adjust the Sensitivity: To adjust the sensitivity of detection, select the level from the pull-down list. Activate Motion Detection: To activate the motion detection, enable the [Detect Area] check box Actions when Motion Detection is Trigger: Select what actions will be taken once...
  • Page 52 Recommendation of Motion Detection Area To ensure the Motion Detection works well, and avoid unnecessary trigger, please follow the rules to draw the Motion Detection Areas:  The moving object larger than the 50% of the Motion Detection Area, it will be detected, and the Motion Detection is triggered.
  • Page 53 Video: When an event (Motion Detection) is triggered, the video will be recorded as still image with AVI format. The beginning and ending time of the file is depending on the Pre and Post Record Time Setting. Snapshots: This option is available when the “Video Format” of streaming 1 is set as “MJPEG”...
  • Page 54 Specific IP Detection For the use of recording software, this device supports the detection of the connection of this device and PC. Whenever the connection is disconnected, it records the video to local SD card to make sure the video recording is continuous. Detect IP –...

  • Page 55: Schedule

    Schedule This function provides the schedule for the following:  Send Snapshot with the Scheduled Time: automatic send a snapshot to the E-mail address, FTP server or Samba network storage, or save to SD card. The interval time can be set. ...
  • Page 56 in light-grey means the time is unselected. Send Snapshot with Scheduled Time Enable / Disable: To enable or disable the schedule function. Snapshot: Select the method to send out the snapshot.  E-mail: Automatic send the snapshot to the specific mail address, the interval time of the snapshot pictures is depending on the Interval setting.

  • Page 57: Micro-Sd Card

    Micro-SD Card In this page, if a Micro-SD Card is inserted, you can record the video once an event is triggered, play back and manage the recorded files in the Micro-SD Card. Note: The Micro-SD card must be formatted as FAT or FAT32 file system. The use of the Micro-SD Card will affect the operation of this device slightly, such as affecting the frame rate of the video.
  • Page 58 SD Card The “.avi” extension name of the file means this file is a video file; the “.jpg” extension name means it is a picture file. Click the file to start Microsoft Media Player to play it. If the bandwidth is lower for playback directly, please right-click on the file and select [Save As…] to download it to the PC, and then play the downloaded file with Microsoft Media Player.
  • Page 59 Auto Deletion If enable this function, the recorded files before the selected day will be deleted automatically. After select the option, click [Apply] to save the setting.

  • Page 60: Network Configuration

    6. Network Configuration A. Intranet Only Connects to PC Directly If you want to connect the camera to PC directly for the very first time setup, please refer to the figure below for the connection. Ethernet Cable Camera This device supports Auto-MDI/MDIX, IP Address: 192.168.1.200 IP Address: 192.168.1.2 you can use a straight or cross-over...

  • Page 61: Connects To An Exist Lan

    Connects to an Exist LAN If the camera will be used in a local network (LAN) and don’t allow to access via Internet, please refer to the figure below for the connection. Intranet (LAN) Camera 1 Switch Router or IP Sharing IP Address: 192.168.1.200 IP Address: 192.168.1.254 Subnet Mask: 255.255.255.0...

  • Page 62: Internet Only

    B. Internet Only Connects to ADSL with Fixed Public IP Address If the camera connects to Internet with an ADSL modem and the public IP address of ADSL is fixed, please refer to the figure below for the connection. Internet (WAN) Camera 3G Mobile Phone IP Address: 60.220.20.250...

  • Page 63: Connects To Adsl With Floating Public Ip Address (Pppoe)

    Connects to ADSL with Floating Public IP Address (PPPoE) If the camera connects to Internet with an ADSL modem and the public IP address of ADSL is variable, the camera can use PPPoE function for the connection. Internet (WAN) Camera 3G Mobile Phone Configure the PPPoE Setting ADSL...
  • Page 64 After enable the DDNS, assume the registered URL is “test.dyndns.org”, now the camera can be linked with following URLs: Client Link Address Remark http://test.dyndns.org With audio: Must enable “3GPP Stream” in 3G Mobile rtsp://test.dyndns.org/3g Configuration  Video/Audio Phone Without audio: ...

  • Page 65: Intranet + Internet

    C. Intranet + Internet Connects to Internet with Fixed Public IP Address If the camera will be added into a local network (LAN), and will be accessed via both Intranet and Internet, please refer to the figure below for the connection. Intranet (LAN) Internet (WAN) 3G Mobile Phone...
  • Page 66  Set Subnet Mask of Router, PC and cameras.  Set Gateway of PC and cameras with the same IP address. The Gateway is the IP address of router.  Set the IP address of a valid DNS into cameras. An invalid DNS will cause the domain name can’t be resolved and reached, such as email address.

  • Page 67: Connects To Internet With Floating Public Ip Address

    With audio: rtsp://60.220.20.250:555/3g Camera 2 Without audio: rtsp://60.220.20.250:555/3gx Connects to Internet with Floating Public IP Address If the public IP address of ADSL connection is variable, you can enable DDNS function to get a fixed URL to instead of the IP address. Note: only one device can enable the DDNS function in the local network (LAN), multiple devices use DDNS will update to the DDNS provider too frequently, and the DDNS provider will block your URL.

  • Page 68: Factory Default

    7. Factory Default To recover the default password and other settings, please follow the steps: 1. Power off this device. 2. Remove the cover of device. 3. Push the "Factory Default Button" as shown on the picture below, and keeping push it and don't release.

  • Page 69: Compatible List Of Sd Card

    Compatible List of SD Card The Compatible List of SD Card Recommended Micro-SD Card SanDisk 128M ADATA 512M SanDisk 256M ADATA 4G SanDisk 512M Toshiba 128M SanDisk 1G Toshiba 256M SanDisk 2G Toshiba 4G SanDisk 4G Kingston 128M SanDisk 8G Kingston 256M SanDisk 16G Kingston 512M...

This manual is also suitable for:

Cam661h-po

Table of Contents