Related Manuals for Asoni CAM6709H
Summary of Contents for Asoni CAM6709H
- Page 1 5M-IR 720P HD H.264 CMOS Network Fixed Dome Camera CAM6709H / CAM6709H-W / CAM6709H-PoE User’s Manual Date: 7/01/2014 Firmware Version: VE1.0.14...
-
Page 2: Table Of Contents
Content Content ............................1 Preface ..........................3 Product Specifications ....................... 3 Product Installation ......................6 A. Hardware Installation ...................... 6 Cable Connections........................ 6 Audio Connections ........................ 8 I/O Connections ........................8 B. Monitor Setting ......................10 C. IP Assignment........................ 11 Live Video .......................... - Page 3 IEEE 802.1x Setting ......................57 Event Handling ......................58 Event Setting ........................58 I/O Setting ........................... 65 Schedule ..........................67 Micro-SD Card ........................69 Network Configuration ..................... 72 A. Intranet Only ........................72 Connects to PC Directly ...................... 72 Connects to an Exist LAN ....................73 B.
-
Page 4: Preface
1. Preface This camera is a 720P HD CMOS network camera which builds in web server. User views real-time video via IE browser. It supports H.264 and MJPEG video compression which provides smooth and high quality video. The event video can be stored in the Micro-SD card, and can be playback remotely. - Page 5 Free App (iCAM Smart) for monitoring via Android/iOS smart phone Hardware CPU / RAM / ROM Multimedia SoC / 128MB / 16MB Image Sensor 1/4” Mega-Pixel CMOS Lens Fixed 2.8mm, Mega-Pixel Lens, F1.8 IR Distance 5 Meters IR LED Built-in 6 IR LEDs Minimum Illumination Color: 0.2 lux (when IR is off)
- Page 6 Sense Up, Digital WDR, Anti Fog, Lens Distortion Correction, White Balance, 3D/2D Digital Noise Reduction, Day/Night color mode, Video orientation Audio Format G.711 (64Kbps), G.726 (24Kbps), G.726 (32Kbps) Privacy Mask 3 definable areas Security Password protection, IP address filtering, HTTPS encrypted data transmission, IEEE 802.1x port-based authentication, QoS/DSCP Firmware Upgrade HTTP mode, can be upgraded remotely...
-
Page 7: Product Installation
3. Product Installation A. Hardware Installation Cable Connections Terminal Block Power Jack Network Connector Microphone Micro-SD Card Slot... - Page 8 To connect the DC 12V power adapter. Power Jack: The RJ-45 connector allows connect to the Ethernet network. Network Connector: The terminal block provides the following functionalities: Terminal Block: DI/ DO: Digital In and Digital Out. ...
-
Page 9: Audio Connections
explanation, please refer to Network Configuration chapter. 6. After finish the configuration for the very first time, if you want to use wireless network, configure the wireless settings, then, plug out the Ethernet cable to use the wireless connection. Audio Connections The terminal block inside of the camera provides audio functionalities. - Page 10 Door/Window Contacts Digital Output (Alarm Output) Relay Board Relay Box...
-
Page 11: Monitor Setting
B. Monitor Setting 1. Right-Click on the desktop. Select “Properties” Change color quality to “Highest (32bit)”. -
Page 12: Ip Assignment
PC must be in the same subnet. For more information about subnets, please consult your network administrator. “Asoni IP Search” is a utility that provides an easier, more efficient way to configure the IP address and network settings of the network camera in Local Network (LAN). - Page 13 2. IP Search searches all the network devices which connect to the intranet and lists on the window. Click [Search] button to search again. 3. From the list, click and select the device with the MAC Address that corresponds to the device that is to be configured.
-
Page 14: Live Video
4. Live Video Start the IE browser, type the IP address of the network camera in the address field: http://<IP of camera> If the “HTTP Port” has been changed from “80”, type the URL as: http://<IP of camera>:<HTTP Port> After link to the camera, it will show a dialogue box. - Page 15 ⑤ ① ② ③ ④ ⑥ Streaming : Select the streaming 1 or 2 from the pull-down list to display. Language : Change the display language. Configuration : Go into the configuration page to set the parameters if necessary. ...
- Page 16 Record : Click this button to record the video into the local PC. It will ask you where to save the video. To stop recording, click this button again. The saved video format is AVI. The recorded file can be played by Microsoft Media Player.
-
Page 17: Configuration
5. Configuration Click [Configuration] button to get into the configuration page. Click [Live View] button to back to the Live-View page. A. System System Information Set up the camera name, OSD (on screen display) information and the camera time. System Information... - Page 18 Server Information MAC Address: The MAC address of the Ethernet network card in the device. Server Name: You can type a name into this field to identify this device. Show on Status Bar: Determine whether show the server name on the Status Bar. LED Indicator: Determine whether light-on or turn-off the network and power status LEDs on the device.
- Page 19 Time Setting Date Format: Select the format to display the date. Time Zone: Select the GMT to match your time zone. Enable Daylight Saving: If using “Daylight Saving”, enable this option and select the start and end time. Synchronize with NTP Server: Select this option and type the IP address of a NTP (Network Time Protocol) server, this device will synchronize the time with the NTP server via network.
- Page 20 After set up, click [Apply] to save the settings.
-
Page 21: User Management
User Management You can add, remove and manage the users in this page. This device supports 3 user groups: Administrator: The administrator can view, operate and configure all functions and settings of this device. Guest: The users in Guest group can only view the live video in Live-View page. ... - Page 22 Edit: To change the username and password, click [Edit] and modify the administrator or user in the pop-up window. Remove: To remove the user, click [Remove].
-
Page 23: System Upgrade
System Upgrade This page allows user to upgrade firmware, restart device and restore the factory default settings. System Upgrade Firmware Upgrade The firmware can be upgraded online. To update the firmware, click [Browse…] to select the new firmware file, and then click [Upgrade] to the procedure. -
Page 24: System Logs
System Logs System Logs System Status Logs Click the [View] button on the right side to list the logs of system status. Motion Trigger Logs Click the [View] button on the right side to list the logs of motion detection. Digital-In Trigger Logs Click the [View] button on the right side to list the logs of digital input detection. -
Page 25: Video/Audio Setting
B. Video/Audio Setting Video Format This device supports H.264 and MJPEG Dual Mode and Triple Streaming, set the video parameters in this page. Video Format... - Page 26 Video System Select NTSC-60Hz or PAL-50Hz to match your local video system. Streaming 1 Output Setting Basic / Advanced Mode: Select the mode to configure the parameters. Advanced mode provides more detail parameters for setting. Resolution: Select the resolution from the pull-down list. ...
- Page 27 VBR (Variable Bit Rate): Set the Video Quantitative from 1 ~ 10, the higher value will get better video quality. The data size of video stream is no limitation, if the upload bandwidth of network is lower than the data size, the video will be displayed slowly.
- Page 28 Frame Rate Per Second: The video refreshing rate per second. Select the frame rate from the pull-down list. Video Compression Format: Choose H.264 or MJPEG format to compress and output the video stream. H.264: The video stream will be compressed in H.264 format. ...
- Page 29 640X480 (Up to 15FPS) 320X240 (Up to 15FPS) 176X144 (Up to 15FPS) Frame Rate Per Second: The video refreshing rate per second. Select the frame rate from the pull-down list. CBR: Set the Video Bitrate from 32Kbps ~ 1Mbps depend on the upload bandwidth of network.
- Page 30 * <Public IP of camera>: The public IP address of the camera. * <HTTP port>: The HTTP port of the camera. This port is assigned in Configuration Network Setting Network Setting Note: Do not use the IE browser in 3G mobile phone because it doesn’t support Java. After set up, click [Apply] to save the settings.
-
Page 31: Image Setting
Image Setting Image Setting... - Page 32 Privacy Mask For the security purpose, there are 3 areas can be setup for privacy masks, the masked areas will not be shown in Live-View and recorded file. To set up or clear the privacy mask, click [Draw/Clear Area] button, and then use mouse to drag the area on the video.
- Page 33 Auto (by Defined-Lux): You can define the Lux of environment to change the color mode automatically. When the environment is brighter than “Color – when over”, the video will display in color; when the environment is darker than “Mono – when under”, the video will display in mono color (black and white).
-
Page 34: Audio Setting
Audio Setting This device supports 2-way audio. Note, the audio will not be smooth when enable SD card recording function simultaneously. Audio Setting Audio from Device to Local PC For this device to local PC, select [Enable] and then click [Apply] to start this function. If set to [Disable], the [Voice] icon on Live View page is not workable. - Page 35 Adjust Volume The volume level of Microphone-In and Audio-Out can be adjusted.
-
Page 36: Network Setting
C. Network Setting Network Setting Network Setting... - Page 37 IP Assignment DHCP: If this device behinds a router and the router provides DHCP service, using DHCP, this device will get all network parameters from the router automatically. Static: Assign IP address, subnet mask, gateway, and DNS manually. IPv6 Assignment This device supports IPv6 address, you can enable this function.
- Page 38 be linked from Internet. HTTPS Port: Set the port for HTTPS connection. The default is “443”, change the port if you want to use router’s NAT (Network Address Translation) to make this device can be linked from Internet. UPnP Setting UPnP: Enable or disable the UPnP protocol.
- Page 39 RTSP Server Setting RTSP Server: The video stream can be direct retrieve via RTSP connection, you can close this function by disable this option. RTSP Authentication: If you select and enable this function, the remote client must meet the authentication to retrieve video stream via RTSP connection. RTSP Port: Set the port for transfer the video and audio.
- Page 40 should configure each recipient with the same multicast group address and receive the streaming from this address. The range is 224.3.1.0 ~ 239.255.255.255 Port: The multicast port. The range is 1 ~ 65535 TTL: Time-To-Live (TTL) for Multicast Packets. This value decides how "far" from a sending host a given multicast packet should be forwarded.
-
Page 41: Wireless Setting
Wireless Setting The Wireless model supports Wireless network connection, set the parameters in this page. Note: Wireless network and Ethernet network use the same IP, user has to unplug Ethernet cable to activate the Wireless connection. If Ethernet cable is plugged, Wireless connection will be stopped. - Page 42 WEP Setting The Wireless model supports “WEP” security encryption. The settings must be same as the Router’s setting. Consult your network administrator to set the parameters.
- Page 43 Authentication: There are “Open System” and “Shared Keys”, it is based on different encryptions. This has to be the same as the Router’s setting. Encryption: There are 64 bits and 128 bits. This is based on Key Type based on the Router’s setting.
-
Page 44: Mail / Ftp / Samba Setting
Mail / FTP / Samba Setting To send out the event video to E-mail, FTP or Samba network storage, please set up the configuration first. Mail/FTP/Samba... - Page 45 Mail Setting Login Method: This device provides 2 kinds of mail settings. “Anonymous” for the mail server which doesn’t need login with user name and password. “Account” for the mail server which needs login with user name and password. Send Mail Server: The IP address or URL of the send-mail server.
- Page 46 FTP Server: The IP address or URL of the FTP server. User Name / Password: The user name and password to log in the FTP server. FTP Port: The port of the FTP service. Default is 21. Store Path: The path to save the sent video file. FTP Mode: Select “PORT”...
- Page 47 settings of mail, FTP or Samba network storage are correct.
-
Page 48: Pppoe / Ddns Setting
PPPoE / DDNS Setting PPPoE/DDNS Setting PPPoE Setting If this device connects to an ADSL modem directly and want to use PPPoE connection, select [Enable] and then set the parameters in this page. - Page 49 Enable/ Disable: Enable or disable the PPPoE connection. User name/ Password: Input the user name and password of the PPPoE connection. Send E-mail After Dialed: If select [Enable], when connect to the Internet via PPPoE, this device will send a mail with the Subject to a specific mail account, this mail contains the public IP address of the ADSL connection.
- Page 50 There are several DDNS providers can be selected. Select the provider from the pull-down list, input Hostname, User name, Password and the Schedule Update time, and then click [Apply] to connect to the DDNS provider. After set up, click [Apply] to save the settings. The “Status”...
-
Page 51: Network (Advance) Setting
D. Network (Advance) Setting HTTPS Setting HTTPS (Hypertext Transfer Protocol Secure) is a combination of Hypertext Transfer Protocol (HTTP) with SSL/TLS protocol. It provides encrypted communication and secure identification of a network web server. Https can help protect streaming data transmission over the network on the higher security level. - Page 52 Created Request Input the secure identification and then click [Apply] to save the settings. Install Certificate There are two ways to set Certificate – “Install Signed Certificate” and “Create Self-Signed Certificate”. Input the necessary data and then click [Apply] to save the settings.
-
Page 53: Snmp Setting
SNMP Setting SNMP (Simple Network Management Protocol) is an Internet-standard protocol for managing devices on IP networks. It is used mostly in network management systems to monitor network-attached devices for conditions that warrant administrative attention. SNMP exposes management data in the form of variables on the managed systems, which describe the system configuration. - Page 54 SNMPv3 To use SNMPv3, click the checkbox to enable SNMPv3, and then set Security Name, Authentication Type, Authentication Password, Encryption Type, Encryption Password of Write mode and Read mode. SNMPv1/ v2c Trap Enable “SNMPv1/ v2c Trap” can detect the Trap server. Please click the checkbox to select what event need to be detected.
-
Page 55: Ip Filter Setting
IP Filter Setting The IP Filter function allows you to create the IP address list to manage the clients that are allowed or denied to access this device. IP Filter Setting IP Address Filter Setting Enable IP address filter: Click the checkbox to enable this function. IPv4 IP Address: Input the IP address (single or range) that will be allowed or denied to access this device. - Page 56 Administrator Access To always allow the administrator access this device, click the checkbox to enable this function, and the input the IP address of administrator. After set up, click [Apply] to save the settings.
-
Page 57: Qos/ Dscp Setting
QoS/ DSCP Setting DSCP (Differentiated Services Code point) specifies a simple mechanism for classifying and managing network traffic and provide QoS (Quality of Service) on IP networks. DSCP is a 6-bit in the IP header for packet classification purpose. Please define the reserve for Live Stream, Event/ Alarm and Management. -
Page 58: Ieee 802.1X Setting
IEEE 802.1x Setting IEEE 802.1x is an IEEE standard for port-based Network Access Control. It provides an authentication mechanism to device wishing to attach to a LAN or WLAN. The EAPOL protocol support service identification and optional point to point encryption over the local LAN segment. -
Page 59: Event Handling
E. Event Handling Event Setting This device supports multiple event settings. Event This device supports 5 kinds of event detections:... - Page 60 Motion Detection. Digital Input Detection. Tampering Detection: This event will be triggered when the lens of camera has been covered or moved. Network Disconnection Detection: This event will be triggered once the wire network is disconnected. ...
- Page 61 “Set Area” row, and then use mouse to drag the area on the video. Adjust the Sensitivity: To adjust the sensitivity of detection, select the level from the pull-down list. Activate Motion Detection: To activate the motion detection, enable the [Detect Area] check box Actions when Motion Detection is Trigger: Select what actions will be taken once...
- Page 62 Recommendation of Motion Detection Area To ensure the Motion Detection works well, and avoid unnecessary trigger, please follow the rules to draw the Motion Detection Areas: The moving object larger than the 50% of the Motion Detection Area, it will be detected, and the Motion Detection is triggered.
- Page 63 Tampering Detection – Enable / Disable: Select to enable or disable this function. After enable the “Tampering Detection”, when the lens of camera has been covered or moved, this event will be triggered, and send the video or snapshot to specific mail address;...
- Page 64 Snapshot (Single): This option is available when the “Video Format” of streaming 1 is set as “MJPEG” in Video Format page. When an event is triggered, this device will take a snapshot with JPG format. Pre and Post Record Time Setting Configure the record time for the event recording file.
- Page 65 Detect IP – Enable / Disable: Select to enable or disable this function. IP Address: The IP address or URL of the PC which installed the recording software. Detection Interval: The interval time of the detection. When Dis-connected: After enable the check box of “Record Video into SD Card”, when the network connection of PC is disconnected, it will save the video into local SD card.
-
Page 66: I/O Setting
I/O Setting This device provides Digital Input and Digital Output. When the Digital Input is triggered, it can send the video or snapshot to specific mail address; transmit the video or snapshot to remote FTP server or Samba network storage; trigger the digital out; record video or snapshot into local SD card. - Page 67 Save to SD Card: When the Digital Input is triggered, record the video or snapshot into to SD card. Log: If “Save to SD Card” option has been selected for action, you can determine whether send a message to the specific mail address FTP site or Samba network storage.
-
Page 68: Schedule
Schedule This function provides the schedule for the following: Send Snapshot with the Scheduled Time: automatic send a snapshot to the E-mail address, FTP server or Samba network storage, or save to SD card. The interval time can be set. ... - Page 69 unselect all time. The square in green means the time is selected; the square in light-grey means the time is unselected. Select / Unselect Specific Time: Click the square of the time table to select or unselect the specific time. The square in green means the time is selected; the square in light-grey means the time is unselected.
-
Page 70: Micro-Sd Card
Micro-SD Card In this page, if a Micro-SD Card is inserted, you can record the video once an event is triggered, play back and manage the recorded files in the Micro-SD Card. Note: The Micro-SD card must be formatted as FAT or FAT32 file system. The use of the Micro-SD Card will affect the operation of this device slightly, such as affecting the frame rate of the video. - Page 71 SD Card The “.avi” extension name of the file means this file is a video file; the “.jpg” extension name means it is a picture file. Click the file to start Microsoft Media Player to play it. If the bandwidth is lower for playback directly, please right-click on the file and select [Save As…] to download it to the PC, and then play the downloaded file with Microsoft Media Player.
- Page 72 Auto Deletion If enable this function, the recorded files before the selected day will be deleted automatically. After select the option, click [Apply] to save the setting.
-
Page 73: Network Configuration
6. Network Configuration A. Intranet Only Connects to PC Directly If you want to connect the camera to PC directly for the very first time setup, please refer to the figure below for the connection. Ethernet Cable Camera This device supports Auto-MDI/MDIX, IP Address: 192.168.1.200 IP Address: 192.168.1.2 you can use a straight or cross-over... -
Page 74: Connects To An Exist Lan
Connects to an Exist LAN If the camera will be used in a local network (LAN) and don’t allow to access via Internet, please refer to the figure below for the connection. Intranet (LAN) Camera 1 Switch Router or IP Sharing IP Address: 192.168.1.200 IP Address: 192.168.1.254 Subnet Mask: 255.255.255.0... -
Page 75: Internet Only
B. Internet Only Connects to ADSL with Fixed Public IP Address If the camera connects to Internet with an ADSL modem and the public IP address of ADSL is fixed, please refer to the figure below for the connection. Internet (WAN) Camera 3G Mobile Phone IP Address: 60.220.20.250... -
Page 76: Connects To Adsl With Floating Public Ip Address (Pppoe)
Connects to ADSL with Floating Public IP Address (PPPoE) If the camera connects to Internet with an ADSL modem and the public IP address of ADSL is variable, the camera can use PPPoE function for the connection. Internet (WAN) Camera 3G Mobile Phone Configure the PPPoE Setting ADSL... - Page 77 After enable the DDNS, assume the registered URL is “test.dyndns.org”, now the camera can be linked with following URLs: Client Link Address Remark http://test.dyndns.org With audio: Must enable “3GPP Stream” in 3G Mobile rtsp://test.dyndns.org/3g Configuration Video/Audio Phone Without audio: ...
-
Page 78: Intranet + Internet
C. Intranet + Internet Connects to Internet with Fixed Public IP Address If the camera will be added into a local network (LAN), and will be accessed via both Intranet and Internet, please refer to the figure below for the connection. Intranet (LAN) Internet (WAN) 3G Mobile Phone... - Page 79 Set Subnet Mask of Router, PC and cameras. Set Gateway of PC and cameras with the same IP address. The Gateway is the IP address of router. Set the IP address of a valid DNS into cameras. An invalid DNS will cause the domain name can’t be resolved and reached, such as email address.
-
Page 80: Connects To Internet With Floating Public Ip Address
With audio: rtsp://60.220.20.250:555/3g Camera 2 Without audio: rtsp://60.220.20.250:555/3gx Connects to Internet with Floating Public IP Address If the public IP address of ADSL connection is variable, you can enable DDNS function to get a fixed URL to instead of the IP address. Note: only one device can enable the DDNS function in the local network (LAN), multiple devices use DDNS will update to the DDNS provider too frequently, and the DDNS provider will block your URL. -
Page 81: Factory Default
7. Factory Default To recover the default settings of this device, please follow the steps: 1. Power off this device. 2. Remove the cover of device. 3. Push the "Factory Default Button" as shown on the picture below, and keeping push it and don't release. -
Page 82: Compatible List Of Sd Card
Compatible List of SD Card The Compatible List of SD Card Recommended Micro-SD Card The speed of SD card must be “Class 4”, “Class 6” or higher speed. SanDisk 128M ADATA 512M SanDisk 256M ADATA 4G SanDisk 512M Toshiba 128M SanDisk 1G Toshiba 256M SanDisk 2G...
Need help?
Do you have a question about the CAM6709H and is the answer not in the manual?
Questions and answers