AEG S73400CTS1 User Manual page 47

the spacer (C) and place them on the
opposite side.
A
• Re-insert the cover (1) on the opposite
side.
1
• Remove the plugs on the upper side
of both doors and move them to the
other side
• Re-insert the lower door on the lower
hinge pivot .
• Insert the middle hinge into the left
drill of the lower door.
• Unscrew the upper hinge pivot and
place it on the opposite side.
• Fit the upper door on the upper door
pivot.
• Re-insert the upper door on the mid-
dle hinge pivot slightly tilting both
doors.
• Re-screw the middle hinge . Do not
forget the plastic spacer .
B
C
2
• Remove the covers (B). Remove the
cover pins (A).
• Unscrew the handles (C) and fix them
on the opposite side.
• Re-insert the cover pins (A) on the op-
posite side.
B
C
Do a final check to make sure that:
• All screws are tightened.
• The magnetic seal adheres to the cab-
inet.
• The door opens and closes correctly.
If the ambient temperature is cold (i.e. in
Winter), the gasket may not fit perfectly
to the cabinet. In that case, wait for the
natural fitting of the gasket.
In case you do not want to carry out the
above mentioned operations, contact
the nearest After Sales Service Force.
The After Sales Service specialist will re-
verse the doors at your cost.
ENGLISH
47
1
A