Table of Contents
Advertisement
1
PRODUCT DESCRIPTION
The Rigid Industries DMX LED Effects control panel is a nine button dual
universe DMX controller with a center rotary slider. The control panel lets you
set colors from red, green, blue and white, the dimming level, almost infinite
color mixing, and automatic play color changing rate (speed). It is designed to
control the Rigid Underwater LED Light that hosts red, green, blue and white
LEDs with a separate DMX channel or slot. In addition, two independent DMX
universes are supported to allow for above and underwater zone control.
1.1
Panel Properties
The Rigid Industries DMX LED Effects control panel hosts dual DMX universes
output RS-485 channels. A single button (DMX) allows the selection of the
DMX universe to control, with settings for both, universe 1 (CH1) or universe 2
(CH2) individually. The panel will change the output to the chosen color or
mode depending on the DMX universe selection. The panel can operate on a
wide range of input voltages from 10-36V DC.
1.2
Control Properties
The Rigid Industries DMX LED Effects control panel features the following
lighting control properties:
•
Dual DMX universes (DMX)
•
RGBW color selection (RED, GREEN, BLUE, WHITE)
•
8-bit dimming resolution
•
Dimming percentage (DIM)
•
Color changing show or play mode (CYCLE)
•
Adjustable show speed
•
Save color selection or show speed (SAVE)
1.3
Networking Properties
The Rigid Industries DMX LED Effects control panel is compatible with DMX-
512A using the RS-485 transmission protocol. Cable lengths of up to 4000ft are
possible using DMX. This controller uses unidirectional data transmission for
remote device or slave color command.
1.4
Solid State Lighting Applications
This panel is packaged into a 6.3" x 3.8 x 0.50" (L x W x H) IP67 water resistant
enclosure, giving you freedom to mount the panel in many environments.
3
Advertisement
Table of Contents
