Summary of Contents for Rigid Industries dmx led effects
- Page 1 ® dmx led effects OWNER'S MANUAL KIT INCLUDES ® • 3M VHB Mounting Pad • Mounting Hardware PART # 40040 IMPORTANT It is strongly recommended that this product be installed by a professional.
-
Page 2: Table Of Contents
PRODUCT DESCRIPTION..............3 Panel Properties...............3 Control Properties..............3 Networking Properties............3 Solid State Lighting Applications...........3 Control Diagram..............4 DMX Modes................4 1.6.1 DMX Universe Selection..........4 COLOR SELECTION................5 RGBW Color Selection............5 2.1.1 Red................5 2.1.2 Green................5 2.1.3 Blue................5 2.1.4 White................ -
Page 3: Product Description
PRODUCT DESCRIPTION The Rigid Industries DMX LED Effects control panel is a nine button dual universe DMX controller with a center rotary slider. The control panel lets you set colors from red, green, blue and white, the dimming level, almost infinite color mixing, and automatic play color changing rate (speed). -
Page 4: Control Diagram
1.6.1 DMX Universe Selection The Rigid Industries DMX LED Effects control panel will power on with both universe one (CH1) and universe two (CH2) selected. Touching the DMX button (see figure 1) will cycle though the Universes starting with CH1. The panel will function with both, 1 or 2. -
Page 5: Color Selection
COLOR SELECTION This section will cover the color selection process and various color modes the Rigid Industries DMX LED Effects control panel can control. The buttons on the Rigid Industries DMX LED Effects control panel use capacitive touch technology and will not physically depress when pushed. The electrical characteristics of your skin are enough for the panel to detect that a selection has been made. -
Page 6: Advanced Features
ADVANCED FEATURES Cycle The Cycle button will put the selected DMX universe (CH1, CH2, or both CH1 and CH2) into a preprogrammed light show cycling though all available colors at a predetermined rate. The color wheel changes functions to ONLY a speed selector while the panel is in cycle mode. -
Page 7: Saving Mixed Colors
4.1.1 Environmental Considerations The Rigid Industries DMX LED Effects control panel was designed to operate in extreme conditions. However, it should not be completely submerged in water, or installed in a location that will be exposed to temperatures greater than 65°C (150°F). The enclosure has an ingress protection rating of IP67. -
Page 8: Drill Size
DMX NETWORK ARCHITECTURE AND TOPOLOGY Setting up your DMX LED Effects The Rigid Industries DMX LED Effects will act as a DMX master in your DMX network. Use this section to understand how the Rigid Industries DMX LED Effects should be used with your DMX capable LED lights. Note that only one DMX master may connect to a single DMX universe, if more than one is connected DMX data will be corrupted. -
Page 9: Dmx Network Protocol
Blue – slot 3 White – slot 4 This Rigid Industries DMX LED Effects control panel will work on a DMX network with other DMX devices as long as they accept standard DMX signals, but will only drive the first four slots on the DMX universe. The panel conforms to all DMX512A for compatibility. - Page 10 Mounting Template *If printing from a printer, choose ACTUAL SIZE print option...
-
Page 11: Specifications
SPECIFICATIONS Physical • Dimensions 6.3” x 3.8 x 0.50” (L x W x H) • Weight: 250g Dimming resolution • 8-bit DMX512A Electrical • Operating supply voltage: 10V-36V DC • Output short circuit protected • Input reverse polarity protected Environmental characteristics •... -
Page 12: Warranty Information
Follow us on facebook at Facebook.com/RigidIndustries 779 N Colorado St, Gilbert, AZ 85233 • 855-760-5337 ext 1008 • www.rigidindustries.com PKG-IS-021 REV3 Rigid Industries, Rigid, and DMX are registered and/or unregistered trademarks of JST Performance, Inc. d/b/a Rigid Industries.