Panasonic Lumix DMC-TZ70 Operating Instructions Manual page 226

Wi-Fi/NFC
■
Sending selected pictures ([Send Images Stored in the Camera])
Select [New Connection] in the [Wi-Fi] menu, and press
[MENU/SET]
Use cursor button to select [Send Images Stored in the
Camera], and then press [MENU/SET]
Use cursor button to select [PC] and press [MENU/SET]
Select [Via Network] or [Direct] to connect
Select the PC you want to connect to
• If the PC you want to connect to is not displayed, select [Manual Input], then enter
the computer name (for Mac, enter the NetBIOS name).
Select the folder you want to send to
• When the connection is established, the confirmation screen for the transmission
setting is displayed. Check the setting and press [MENU/SET]. To change the
send setting, press the [DISP.] button.
Select [SINGLE] or [MULTI]
• To change the setting or disconnect, press [Wi-Fi] button.
■
When [SINGLE] is selected
Select the picture
Select [Set]
■
When [MULTI] is selected
Select the picture (repeat)
• If selected again, the setting will be cancelled.
Select [OK]
• The number of pictures that can be sent by
[MULTI] is limited.
• Confirmation screen is displayed. If you select [Yes], the operation is executed.
(→61)
- 226 -
(→249)
(→258)
(→190)
Sending pictures to a PC
SQW0215