[Aperture-Priority] Mode; Shutter Speed - Panasonic Lumix DMC-TZ70 Operating Instructions Manual

Application (Record)
Taking pictures by setting the aperture value

[Aperture-Priority] Mode

■
Recording mode:
When recording, you can control the aperture value to meet your recording purposes.
Shutter speed is automatically adjusted to be appropriate for the set aperture value.
Set mode dial to [
Turn the control ring or control dial to select the aperture
value
• When the aperture value is increased, the range of depth in focus expands, and
the picture shows up clearly from the position of the camera to the background.
When the aperture value is reduced, the range of depth in focus shrinks, and the
background can get blurry.
Aperture values that can be set
F3.3 - F8.0
*
1 You may not be able to select some values depending on zoom position.
*
2 The lower limit of shutter speed differs depending on ISO Sensitivity.
●
When the picture is too bright or too dark or there is incorrect exposure, the numbers
for the aperture value and shutter speed are shown in red.
●
LCD monitor or viewfinder brightness may vary from the actual still picture recorded.
]
About the exposure meter

Shutter speed

(Automatic adjustment)
Set aperture value
*
1
- 107 -
• Proper exposure is
not possible in the
range indicated in
red.
Shutter speed set (seconds)
*
4 2 - 1/2000
(→143)
SQW0215