Panasonic Lumix DMC-TZ70 Operating Instructions Manual page 15

Preparations
■
Setting the sensitivity of the eye sensor or setting to switch the display
between the viewfinder and monitor
The sensitivity of the eye sensor can be set using [Eye Sensor] in the [Setup] menu.
Select [Eye Sensor] from the [Setup] menu
Use to select [Sensitivity] or [LVF/Monitor Switch] and press [MENU/SET]
Use to select the setting and press [MENU/SET]
[Sensitivity]
[LVF/Monitor Switch]
■
About diopter adjustment
Adjust the diopter to suit your vision so that you can see the Viewfinder clearly.
Turn the diopter adjustment dial to adjust until you are able to clearly see the characters
displayed in the viewfinder.
Diopter adjustment dial
●
When doing diopter adjustment, align the centre of the viewfinder with your eye.
Use this setting to set the sensitivity of the eye sensor.
[HIGH] / [LOW]
Use this setting to switch the display between the viewfinder and
monitor.
[LVF/MON AUTO] (Automatic switching between viewfinder and
monitor) / [LVF] (Viewfinder display) / [MON] (Monitor display)
• After the display is switched using the [LVF] button, the setting of
[LVF/Monitor Switch] will also change.
- 15 -
Names and Functions of Main Parts
(→61)
SQW0215