Docomo FOMA D903i Manual

Table of Contents

Quick Links

Download this manual

Quick Search/

Contents/Cautions

Manual

for

Before Using D903i

Calls/Videophone Calls

'06.11

PushTalk

Phonebook

Sounds/Displays/Lights

Settings

Safety Settings

Camera

i-mode/i-motion/i-channel

Mail

ppli

Osaifu-Keitai/ToruCa

GPS Function

Full Browser

Displaying/Editing/

Managing Data

Music Playing/FM Radio

Other Convenient Functions

Network Services

Data Communication

Character Entry

Using Your FOMA Terminal

Overseas

Appendix/Data Interchange/

Troubleshooting

INDEX/

Quick Reference Manual

Table of Contents

Chapters

Table of Contents

Need help?

Do you have a question about the FOMA D903i and is the answer not in the manual?

Questions and answers

Summary of Contents for Docomo FOMA D903i

Page 1 Quick Search/ Contents/Cautions Manual Before Using D903i Calls/Videophone Calls ’06.11 PushTalk Phonebook Sounds/Displays/Lights Settings Safety Settings Camera i-mode/i-motion/i-channel Mail α ppli Osaifu-Keitai/ToruCa GPS Function Full Browser Displaying/Editing/ Managing Data Music Playing/FM Radio Other Convenient Functions Network Services Data Communication Character Entry Using Your FOMA Terminal Overseas Appendix/Data Interchange/...
Page 2 o l l o i t : s l : s l S " l l a l l a l f f l f f z i l z i l " t...
Page 3 SSL. In the event that the user shall sustain damage or loss due to the use of SSL, neither DoCoMo nor the certifier shall be responsible for any such damage or loss.
Page 4 Quick Reference Manual describes how to operate frequently-used functions. Use it by separating from this instruction manual. ● In the manual for FOMA D903i, the FOMA D903i is usually referred to as “FOMA terminal”. ● This manual explains functions performed with a microSD memory card. A microSD memory card is required separately.
Page 5 How to use and refer to this manual Shown below is an example when you search for the page where “My Picture” is described. Searching on INDEX Use INDEX if you have already known a function or service name. Downloading..My Menu ........
Page 6: Default Setting
Shortcut operation ☛P30 Making full use of images Menu 51 Displaying images Sorting data Title & function name: My Picture Sort Function names are You can display images saved in My Picture in You can change the order of data of the list listed on INDEX.
Page 7: Quick Search
Quick Search Use this Quick Search to look for the frequently-used or convenient functions directly. Useful • Notify/not notify your phone number....46 Caller ID Notification functions for • Put the current call on hold........51 On-hold phone calls • Talk facing the phone screen ......
Page 8 Advanced functions for • Send your original Deco-mail ......218 Deco-mail mail • Send images with mail........222 Attachment • Sort and save mail automatically....... 244 Sort Criteria Advanced • Turn the compact light on when shooting..172 Compact light functions for •...
Page 9 Contents How to use and refer to this manual ........1 Quick Search............... 4 Features and functions of FOMA D903i ......8 Making full use of D903i ............ 10 SAFETY PRECAUTIONS (Always follow these directions) ..12 Handling instructions ............18 About intellectual property rights ........
Page 10 C o n t e n t s i-αppli ppli Downloading Starting i- ppli i- ppli To i- ppli Standby Display etc. α α α α Osaifu-Keitai/ToruCa Osaifu-Keitai iC transfer service Starting Osaifu-Keitai compatible i- ppli α ToruCa Obtaining ToruCa Displaying ToruCa Setting ToruCa IC Card Lock GPS Function GPS Position Location Navigation GPS-compatible i- ppli Location Request...
Page 11 Features and functions of FOMA D903i FOMA is the name of a set of services provided by DoCoMo based on W-CDMA, which is recognized as one of the systems compliant to the global standard for third generation mobile communications (IMT-2000).
Page 12 The time in FOMA terminal is automatically corrected by (phone), メール(mail), カメラ(camera) and ｉモード the time information from DoCoMo network. Also, you can (i-mode) in large size of characters. set the time on your phone ahead or back, if you want.
Page 13 Making full use of D903i A variety of functions of D903i visual communications are explained here. Videophone You can see and talk with a party in the distance. Instead of your image, a surrounding scenery image through the out-camera or a Chara-den character can be shown to the other party. Your terminal The other party’s terminal The other party’s terminal The other party’s terminal Talk while seeing each other.
Page 14 Chaku-moji When you make a call, you can set a message (Chaku-moji) to be displayed The other party’s screen on the other party’s incoming screen. The other party can see the message (Chaku-moji) and know in advance what the matter is and how you are feeling.
Page 15: Table Of Contents
● The following symbols are used to highlight instructions that are very SAFETY PRECAUTIONS (Always follow important and that must be strictly these directions) followed. ● Read the following SAFETY PRECAUTIONS to ensure that the phone This indicates the action is is used correctly.
Page 16: Handling The Foma Terminal, Battery Pack
DANGER such as a gas station that is subject to flammable gases. Do not charge in such a place. Use only DoCoMo-certified Charging could cause fire. battery packs and adapters (and When using Osaifu-Keitai inside a gas station, make sure to turn off the FOMA chargers) with the FOMA terminal in advance.
Page 17: Handling The Foma Terminal
Turn off the FOMA terminal in CAUTION the vicinity of electronic equipment that relies on high- precision control or faint When a child uses the FOMA signals. terminal, first be sure an The FOMA terminal may interfere with the experienced adult teaches correct functioning of such electronic proper usage methods and equipment.
Page 18: Handling The Battery Pack
Do not place the FOMA terminal Use the FeliCa reader/writer in an area over an air bag or in function in Japan. an air bag deployment area such The FeliCa reader/writer function of the FOMA terminal is certified to be as on a dashboard in a vehicle.
Page 19: Handling Optional Devices (Ac Adapter/Dc Adapter/Desktop Holder/In-Car Holder)
Failure to do so could result in electric of battery pack when it is no longer used shock, short circuit, or fire. and bring it to a DoCoMo Shop after the insulation. Alternatively, you can also Use the designated power dispose of the battery pack in accordance with local regulations.
Page 20: Handling The Uim (Foma Card)
Be sure the power plug is free of Handling the FOMA terminal in the vicinity of dust. medical devices Failure to do so could cause the equipment to catch fire. The information given below conforms to the guidelines set forth by the Electromagnetic Compatibility During charging, place the Conference regarding the protection of electronic medical equipment from radio waves emitted by mobile...
Page 21 If you permanently lose important data. carry the components, sweat could cause internal NTT DoCoMo cannot be held responsible in any corrosion that leads to equipment failure. As a way for the loss of stored data.
Page 22 UIM in some other form. ● Recharge the battery pack in locations where the If the data should be erased, NTT DoCoMo ambient temperature is between 5 ° C and 35 ° C. assumes no responsibility for the loss of any data.
Page 23 Network, ToruCa, DCMX, visualnet, i-channel, herein are the sole property of their respective owners. PushTalk, PushTalkPlus, iD, FirstPass, sigmarion, ©2006 Networks Associates Technology, Inc. All Security Scan, musea, Public mode, My DoCoMo, Rights Reserved. IMCS, the FOMA logo, the i-mode logo, the i- ppli α...
Page 24 ® ･ Powered By Mascot Capsule /Micro3D Edition For further utilizing such as promotion, in-house ® Mascot Capsule is a registered trademark of HI use or profit-making business, please contact CORPORATION. MPEG LA, LLC in the US. ･ “ATOK” and “APOT” (Advanced Prediction ･...
Page 25 Basic package and optional accessories Basic package FOMA D903i Instruction manual CD-ROM for FOMA (including the written D903i (this book) warranty and the rear cover D14) Quick Reference Manual ☛P490 The PDF version of “Manual for Data Communication” and “Kuten Code List”...
Page 26 Before Using D903i Names and functions of parts .................24 Reading the display ..................27 Selecting the menu ...................30 Number of saved, registered and protected items in D903i ......34 Using the UIM (FOMA card) ................35 Attaching/removing the battery pack .............38 Charging the battery of FOMA terminal ............39 Checking the remaining battery level ........
Page 27: Names And Functions Of Parts
Names and functions of parts : 109 (H) x 48 (W) x 18.2 (D) Size (mm) (when closed) : Approx. 113 (with battery pack) Weight (g) Earpiece Switches between the standard mode and the The other party’s voice comes out of here. macro mode while shooting with the out-camera.
Page 28 pPhonebook/Schedule/Upper right soft key One-push open button Use this key to display the phonebook or Use this button to open FOMA terminal. Keylock switch ☛P160 schedules, perform the operation shown in the upper right part of the guide row, etc. Use this key to set/cancel Key Lock.
Page 29 Using the Speed Selector You can rotate the Speed Selector as well as press o and O to operate it. The operation performed by rotating the Speed Selector varies by the screen. Operating on the standby display Display the menu, phonebook or schedules, or switch images on the standby display by rotating the Speed Selector.
Page 30: Reading The Display
Self Mode is set ☛P156 i-mode Mail or Message R/F exists During data transfer ☛P332, P348 unreceived in the Center DoCoMo keitai datalink in progress Unread i-mode Mail and/or SMS fills ☛P414 storage space and also SMS storage In i-mode communication (during space is full on UIM ☛P256...
Page 31 Unread i-mode Mail exists ☛P228 Public mode (Driving mode) is set Unread SMS exists ☛P255 ☛P73 Answer Machine is set ☛P76 (blue)/ (red) Recorded messages full ☛P76 Unread Message R exists/fills storage ☛P203 PIM Lock is set ☛P156 space* (green)/ (red) Connecting to external device via the FOMA USB cable (optional) ☛P88,...
Page 32 Reading the task bar The icon indicating the function (task) in progress appears on the task bar (up to 9 icons). You can confirm functions being used and run. In addition, when receiving mails/messages, the reception result scrolls. While entering characters, the input mode appears on the task bar. ☛P417 ･...
Page 33: Selecting The Menu
INFORMATION Note that the following cases may occur due to the characteristics of liquid crystal display (LCD) and they are not ● defects in FOMA terminal. ･ FOMA terminal display is manufactured by taking advantage of highly advanced technology but some dots may be always or never lit.
Page 34 When several shortcuts are available When there are multiple shortcut operations available with the normal menu (except for simple menu), the shortcut operations other than described in the operating procedure are shown at the far right of the title in the body text.
Page 35 ■ Selecting menu items (List view) Press % to highlight a menu item and press o or r. To return to the menu of previous level: l or c ･ Menu item that has been highlighted Menu item that cannot be selected (dimmed) Lower-level menu exists.
Page 36 Selecting an item from the check box % to highlight a check box Press o The check box changes from , and is selected. ･ Select the selected item to cancel the selection Depending on the function, you can select/cancel all items by pressing m. ･...
Page 37: Number Of Saved, Registered And Protected Items In D903I
● i-motion to the microSD memory card. Exchangeable data ☛P336 If you have a PC, you can use the DoCoMo keitai datalink and the FOMA USB cable (optional) to transfer and save the ● data such as mail, bookmarks, images, melodies and video/i-motion to your PC.
Page 38: Using The Uim (Foma Card)
Using the UIM (FOMA card) The UIM (FOMA card) is a card in which your phone number and other information are recorded. Insert the UIM into FOMA terminal to use it. ･ For details on handling the UIM, refer to the UIM manual. Inserting/removing the UIM Use your FOMA terminal with the UIM inserted.
Page 39 The UIM operation restriction is not set to the data obtained via infrared/iC communication, the microSD memory card or ● DoCoMo keitai datalink, or to the still images or videos taken with the built-in camera. When the UIM is inserted in other i-channel compatible terminals, the i-channel information is not displayed as ticker on ●...
Page 40 UIM (green) and a terminal compatible with WORLD WING. Note that the D903i terminal can be used only in a DoCoMo 3G roaming service area. In a GSM service area, insert the UIM into a GSM-compatible terminal to use it.
Page 41: Attaching/Removing The Battery Pack
While pressing the top of the rear cover with your thumb, slide it in the direction of the arrow until it is removed. bWith the surface with the DoCoMo logo and the recycle mark facing up, insert the battery pack into FOMA terminal at the angle as shown in the figure.
Page 42: Charging The Battery Of Foma Terminal
Charging the battery of FOMA terminal When the battery level is low, charge the battery. The battery level icon shows how much charge remains in the battery. ☛P42 ･ Charging time and operation time on full charge (estimates) Charging time Continuous call time Continuous standby time Approx.
Page 43 ･ FOMA terminal uses a lithium ion battery containing valuable materials that should be recycled. To protect the environment, return used batteries to an NTT DoCoMo service counter, NTT DoCoMo agent or recycling center. ･ Please take the following precautions when recycling batteries: ・...
Page 44 ■ Charging the battery in the desktop holder aUnfold the power plug from the AC 100 V AC adapter and plug it into a 100 V AC outlet outlet. Power plug bInsert the AC adapter connector in the desktop holder until it clicks. Enter key cAlong with the desktop holder, insert FOMA terminal at the angle as shown in...
Page 45: Checking The Remaining Battery Level
Checking the remaining battery level Battery Level The display indicates an estimate of the remaining battery level in 3 levels. (Level 3): Amply charged (Level 2): Charging decreased (Level 1): Almost empty. Charge the battery. Battery level icon ･ The default battery level icon differs depending on the color of FOMA terminal.
Page 46: Turning The Power On/Off
Turning the power on/off Power ON/OFF ･ When FOMA terminal is turned on for the first time, a confirmation screen appears asking whether to perform Software Update. ☛P474 Turning the power on Hold down f for over 2 seconds The wake-up screen appears and then the standby display. The wake-up screen may take some time to appear.
Page 47: Setting The Date And Time
When automatic adjustment is set, the time is corrected in Japan according to the information obtained from the DoCoMo network. Outside Japan, the time will be corrected according to the information from the network of the connected service provider, when such information is received.
Page 48 INFORMATION You cannot use the following functions when the date and time are not set: ● ･･･ Auto Power ON/OFF Alarm Clock Certificate Download ･･･ ppli Auto Start ppli DX Flash movie which uses the date and time setting α...
Page 49: Notifying Your Phone Number To The Other Party
Notifying your phone number to the other party Caller ID Notification Set FOMA terminal to send your phone number (caller ID) to be displayed on the other party’s phone every time you make a call. ･ The caller ID is your important information. Carefully consider whether to send your caller ID. ･...
Page 50 Calls/Videophone Calls Making calls/videophone calls Videophone .......................48 Making calls/videophone calls ................49 Transmitting tone signals (DTMF) ..........Send DTMF Switching between a voice call and videophone call ........53 Using Redial/Received Calls ........Redial/Received Calls Setting Chaku-moji ..............Chaku-moji Showing/hiding your caller ID for each call ......186/184 Call Making calls by setting the conditions ........Call Option...
Page 51 Videophone The videophone function is available between terminals that support DoCoMo’s videophone. By using the videophone, you can talk on the phone while looking each other images. It is also possible to display a still image, substitute image, Chara-den, etc. instead of your self image.
Page 52 Making calls/videophone calls Making calls/videophone calls Enter the phone number ･ When calling general subscriber phones, always include the area code, even from the same city. ･ Up to 80 digits can be entered. However, only 24 digits are displayed. To correct the phone number: c ･...
Page 53 INFORMATION [Common] If you hear a guidance requesting your caller ID when making a call, call again after setting FOMA terminal to send ● caller ID. ☛P46 When you have subscribed to the Multi Number service, you can call after selecting a registered multi-number. ☛P409 ●...
Page 54 Putting calls on hold while talking On-hold Putting the call on hold while talking allows you to talk without the other party hearing your voice. Callers are charged for the time spent on hold. Press o during a call The call is put on hold and a guidance (on-hold Flashes tone) is played.
Page 55 Transmitting tone signals (DTMF) Send DTMF ･ You can input tone signals (DTMF) during a videophone call while sending your self image ( ), the camera-off image ( ) or Chara-den ( Example During a videophone call m9 during a videophone call Enter with dial keys The entered number appears on the screen and the tone signals (DTMF) are transmitted.
Page 56 INFORMATION Tone signals (DTMF) may not be received depending on the receiving device. ● You cannot make a call to another party by putting the current call on hold and entering a pause (P) or timed pause (T). ● Switching between a voice call and videophone call You can switch between a voice call and a videophone call by operating from the submenu during a call when the other party’s terminal can switch calls.
Page 57 Menu 46 / Menu 45 Using Redial/Received Calls Redial/Received Calls FOMA terminal records voice calls, videophone calls and PushTalk calls that you made in Redial and those you received in Received Calls. With Received Calls, you can check unanswered calls (missed calls) and recorded messages.
Page 58 ■ Deleting redial/received call logs: ･ You cannot delete multiple calls at once on the details screen. a Highlight a call To delete multiple calls: m52 ･ Select calls To delete all: m53 ･ b Select Yes a (for over a second) ■...
Page 59 Reading the redial/received call list screen Example For Redial Date and time Calling/receiving date and time (the local date and time during stay overseas) Icon Icon registered in the phonebook* ･ appears when a PushTalk call was made to a group.
Page 60 Setting Chaku-moji Chaku-moji You can have a message (Chaku-moji) displayed on the incoming screen of the other party’s terminal for outgoing voice/videophone calls, letting him/her know what the matter is in advance. ･ Supporting models: 902iS series, 903i series, SH902iSL, SH702iS, P702iD, D702iF, and N902iX HIGH-SPEED ･...
Page 61 Making the Chaku-moji reception setting Message Display Setting Default Only with Caller ID m8732 Press any of 1 to 4 ：Displays all Chaku-moji. Display all ：Hides Chaku-moji. Hide all Only from stored No.：Displays Chaku-moji only from a party registered in the phonebook. Only with Caller ID ：Displays Chaku-moji only from a party with the caller ID.
Page 62 Showing/hiding your caller ID for each call 186/184 Call Prefix a specific number to the beginning of the phone number when you make a call. ･ The caller ID is your important information. Carefully consider whether to send your caller ID. ･...
Page 63 ･ For the countries and overseas carriers you can connect to, visit the DoCoMo website for international services. ･ The image of the other party displayed on FOMA terminal may be distorted or connection may not be established depending on the terminal at the other end of the international videophone line.
Page 64 Setting for international calls Int’l Call Assist You can set whether to make an international call by replacing “+” which was entered at the beginning of a phone number with the international access code set in this setting, and whether to make a call from overseas by adding the country code.
Page 65 Using “+” to make an international call When you enter “+” at the beginning of a phone number for dialing, a confirmation screen appears asking whether to replace “+” with the international access code according to Int’l Call Assist. ･ If you make a call by entering “+”...
Page 66 Making a call by specifying a sub-address Enter the phone number Enter the sub-address Press n (voice call) or t (videophone call) ･ The sub-address needs to be set on the other party’s phone or communication device. INFORMATION Even when Sub Address is set to ON, if “ ”...
Page 67 Talking without using hands in a car In-car Handsfree You can make and receive voice calls from a handsfree compatible device by connecting FOMA terminal via USB to such device as the In-Car Hands-Free Kit 01 (optional) or car navigation system. ･...
Page 68 Display information The caller’s phone number, name, image and/or video/i-motion will be displayed on the screen according to the dialing condition of the caller and your FOMA terminal settings. You can set FOMA terminal not to display the name or phone number. ☛P137 ■...
Page 69 When you hear beeps (call waiting ring tone) during a voice call If Voice Mail Service, Call Waiting Service or Call Forwarding Service is subscribed, you will hear beeps (call waiting ring tone) when you receive another incoming voice call during a voice call and the following operations can be performed: Service Operation...
Page 70 Select Yes The call is switched to a videophone call and your self image is sent to the other party. ･ To send the substitute image (camera-off image): Select No ･ When you select Yes, your self image is sent for the first time. ■...
Page 71 Disconnecting/continuing/holding a call by closing FOMA terminal Close Setting ･ This function does not operate during 64K data communication or packet communication. ･ You can end a PushTalk call by closing FOMA terminal. Use PushTalk Close Setting to set it. Default Continue m8472 Press any of 1 to 3...
Page 72 Adjusting the volume of ring alerts and other sounds emitted from FOMA terminal Adjust Volume Adjust the volume of call, PushTalk, mail and Message R/F ring alerts, alarm clock, schedule alarm, ppli sounds, and the sound that plays when obtaining ToruCa. α...
Page 73 ToruCa receive alert ： Adjusts the volume of sound that plays when obtaining ToruCa. This setting is reflected to the setting of ToruCa Alert. ☛P286 O to adjust the volume Press o To set to STEPTONE: u or r when the volume is level 6 ･...
Page 74 Setting the priority screen for incoming calls during a call or packet communication Priority Comm Mode Set the priority of the screen to be displayed when you receive a packet communication through a connected PC during a voice call or you receive a voice call during i-mode. ･...
Page 75 Setting the response hold guidance Status Message You can record your own voice as response hold guidance. ･ One guidance of up to about 10 seconds long can be recorded. ･ While a voice call or videophone call is during Response and Hold, the guidance set by this function is played.
Page 76 Setting the on-hold tone On-hold Tone ･ While a voice call or videophone call is during On-hold, the melody set by this function is played. Default 保留音・ボイス(On-hold tone, voice) m81172 Press any of 1 to 3 ･ To play a melody: Highlight a melody Using Public mode (Driving mode) Public mode (Driving mode) Public mode is an automatic answering service considering etiquette in highly public places.
Page 77 ■ Operation when receiving calls in Public mode (Driving mode) with network service activated Service Receiving voice calls Receiving videophone calls Voice Mail The caller hears the Public mode guidance and The call is connected to the Voice Mail Service Service the call is then connected to the Voice Mail Center without the Public mode video guidance.
Page 78 Using Public mode (power off) Public mode (power off) is an automatic answering service considering etiquettes in highly public places. When Public mode (power off) is set and then a call is received with FOMA terminal switched off, a guidance is played and informs the caller that the called party is in an area (hospital, airplane, priority seat area on a train, etc) where the phone should be turned off and cannot answer the call.
Page 79 It is advisable that the contents of recorded messages be separately written down in a notebook, etc. Recorded data may be lost due to failure, repair, change of model or other handlings of FOMA terminal. If the data should be erased, DoCoMo assumes no responsibility for the loss of any data. Menu 4711...
Page 80 Recording the caller’s message starts ･ A beep announces the caller the start and end of the recording. And when about 25 seconds have elapsed since the start of recording, rapid beeps sound to indicate that the end of recording is approaching.
Page 81 Menu 4714 Setting the greeting message Greeting Message Setting You can record your own voice as greeting message. ･ One greeting of up to about 10 seconds long can be recorded. Default Preinstalled Example Setting a recorded greeting Select Greeting message field To reset to the default greeting: 1 ･...
Page 82 Select a recorded message to play ･ During playback, the following operations are available: % ：Adjust volume o：Stop n：Speakerphone on/off (for voice call messages only) ■ Deleting: a Highlight a recorded message To delete all: m22 ･ b Select Yes ■...
Page 83 Setting images being sent to the other party You can change the image being sent to the other party or apply special effects to it during a videophone call. Also, you can switch between the in-camera and the out-camera. Switching the outgoing image between your self image and the substitute image Press t during a call ･...
Page 84 Select a frame ･ While the in-camera is used, the mirror image (left-right reversed image) is displayed on the screen, but the normal image (right directed image) is sent to the other party. While the out-camera is used, the same image as displayed on the screen is sent to the other party.
Page 85 Adjusting the brightness/color density/flicker of outgoing images Camera Setting You can adjust the brightness and color density in 5 levels. Also, you may be able to control the flicker of images, if it occurs, by making settings according to the power supply frequency in your area. ･...
Page 86 Switching display magnifications Zoom ･ This setting is available only while your self image is being sent. Default normal ( Press & during a call Each press of r switches the magnification of image as follows. Press l to switch in the reverse ･...
Page 87 Turning the compact light on ･ You can switch the compact light on only while the out-camera is used. ･ The compact light may go out temporarily when you perform some setting operations while talking. Press m5 during a call The compact light is turned on.
Page 88: Changing The Videophone Settings
Changing the videophone settings Videophone Settings Set the operation to be performed when a videophone call is not connected, the screen displayed during a videophone call, etc. ･ The setting of Auto redial as voice is provided to ensure access to the other party. By setting this function to ON, a dialed videophone call will be automatically redialed as voice call if the other party’s terminal does not support the videophone function or cannot receive the videophone call while using the mova service through Dual Network Service.
Page 89 Menu 8235 Setting the substitute and on-hold images to be displayed during a videophone call Image Setting Change the images to be sent to the other party during a videophone call such as the substitute image, answer machine image, response hold image, on-hold image and video memo image. ･...
Page 90 Setting of switching between a voice call and videophone call Notify Switchable Mode Set whether to notify the other party’s terminal that your terminal can switch between a voice call and a videophone call. ･ You cannot change the setting during a voice call or videophone call. ･...
Page 91: Using The Videophone By Connecting To An External Device
The application called “ドコモテレビ電話ソフト 2005 (DoCoMo videophone software 2005)” that is compatible with this function is available on the DoCoMo videophone software website. Visit the site below and download it (visit the support website for details of the environment for usage on PC): http://videophonesoft.nttdocomo.co.jp/ (in Japanese only)
Page 92 PushTalk What’s PushTalk? .....................90 Making PushTalk calls ..................90 Receiving PushTalk calls .................92 Registering entries into the PushTalk phonebook ..............PushTalk Phonebook New Entry Making a PushTalk call by using the PushTalk phonebook ......94 Deleting members from the PushTalk phonebook ................Delete PushTalk Phonebook Setting for incoming/outgoing PushTalk calls ..........96...
Page 93: What's Pushtalk
音の設定 What’s PushTalk? The PushTalk button (g) allows you to communicate with multiple people (up to 5 including yourself) by simple operation. Press the PushTalk button for over a second to make access to the PushTalk phonebook, select the parties to talk to and press g. PushTalk communication fee is charged every time you press g and speak. Hold down g while you are speaking and the other parties only listen to you.
Page 94 Communicating on PushTalk Enter the phone number When the other party answers, the answering tone sounds and PushTalk starts. ･ When FOMA terminal is closed or P-Talk Speakerphone is set to ON, the speakerphone function is turned on. If P-Talk Speakerphone is set to OFF or Silent Mode is active, hold down g for over a second to make a call using the speakerphone.
Page 95: Receiving Pushtalk Calls
p during a PushTalk call Select the adding method ■ Selecting from the PushTalk phonebook: Select View PT ph.book Select a member Do the same as you select members from the PushTalk phonebook. ☛P94 ･ To add from a PushTalk group: p in the PushTalk phonebook list ･...
Page 96 Press f when you end PushTalk INFORMATION You cannot answer incoming PushTalk calls during a voice call. They are recorded in the received call history. ● PushTalk calls cannot be received during a videophone call, videophone call through an external device, data ●...
Page 97: Registering Entries Into The Pushtalk Phonebook
INFORMATION To register a member from the FOMA terminal phonebook to the PushTalk phonebook, highlight a party from the ● phonebook list, press m33, and select Yes. When multiple phone numbers are registered, only one of them can be registered. Select the desired phone number and select Yes. You can also make the same registration by highlighting a phone number on the phonebook details screen, pressing m43, and selecting Yes.
Page 98 g or t When the first member answers, the answering tone sounds and PushTalk starts. ･ If you do not select any member, a call is made to the highlighted member. If P-Talk Speakerphone is set to OFF or Silent Mode is active, hold down g or t for over a second to ･...
Page 99: Deleting Members From The Pushtalk Phonebook
Select Yes Select No ･ To also delete from the FOMA terminal phonebook: Select Yes Select Yes ･ If you delete a member registered in a group, the member is also deleted from the group. Deleting a group g (for over a second) Highlight the group Select Yes ･...
Page 100 Default 30 sec m8532 The same operation is possible by pressing m51 in the member list. ･ Press p Enter the ringing time (1 to 60 seconds) Answering PushTalk calls automatically PushTalk Auto Answer You can automatically answer the received PushTalk call. When a PushTalk call is answered, the speakerphone function is automatically turned on regardless of the setting of P-Talk Speakerphone.
Page 101 Menu 284 / Menu 8537 Setting operations for an incoming PushTalk call during i-mode i-mode Arrival Act: PT Default PushTalk preferred The same operation is possible by pressing m56 in the member list. ･ Press 1 or 2 PushTalk preferred： i-mode is terminated at the time when an incoming PushTalk call is received, and the incoming PushTalk call screen appears.
Page 102 Phonebook Phonebooks supported by FOMA terminal ..........100 Registering entries into the FOMA terminal phonebook ................... Phonebook New Entry Registering entries into the UIM phonebook ................UIM Phonebook New Entry Setting group names and incoming/outgoing actions ..Group Setting Making calls from the phonebook ......Phonebook Search Editing phonebook entries ..........
Page 103: Phonebooks Supported By Foma Terminal
Note that in case i-mode terminal is used by sender, even when the mail address is registered in the phonebook without the domain name “@docomo.ne.jp”, the settings of the phonebook take precedence and the name registered in the phonebook is displayed. When the mail address is “mobile phone number@docomo.ne.jp”, register in the phonebook without...
Page 104: Registering Entries Into The Foma Terminal Phonebook
If you have a PC, you can use the DoCoMo keitai datalink and the FOMA USB cable (optional) to send data to the PC. Also, if you have subtracted to Data Security Service (charges apply), you can save the data to the Data Center.
Page 105 Setting an image: 1 ■ Select a folder Select an image ･ If an image with horizontal and vertical (or vertical and horizontal) sizes exceeding 640 x 480 is selected, a confirmation screen is displayed asking whether to save the reduced image. If you select Yes and set the image, the image of which size is reduced to 96 x 72 (phonebook) or smaller is set/saved.
Page 106: Registering Entries Into The Uim Phonebook
Setting the incoming actions for each phonebook entry Alert by Contact Ring alert or lighting, etc. can be set for each entry which is registered in the FOMA terminal phonebook. Search the phonebook Highlight a party Searching methods of the phonebook ☛P105 ･...
Page 107: Setting Group Names And Incoming/Outgoing Actions
Press p Select each item to set Name and reading ：Check the name Name ■ Correcting the name: Select the name field Correct the name ：Check the reading Reading ■ Correcting the reading: Select the reading field Correct the reading (up to 25 one-byte or 12 two-byte characters) ･...
Page 108: Making Calls From The Phonebook
Press p Setting incoming/outgoing actions of the group of FOMA terminal phonebook Alert/Image by Group m412 Highlight a group & to display the setting screen Press p Select each item to set For setting call images, follow Step 3 of “Registering entries into the FOMA terminal phonebook”. ☛P101 ･...
Page 109 The first time you use the search method, the phonebook list by showing all names (Japanese syllabary order) is displayed. In case of specifying the searching method, the phonebook list is displayed by the specified method. Icon set for the first phone number Number of phone numbers and mail addresses registered in the highlighted entry The first phone number registered in the highlighted entry (The part that cannot be displayed will be omitted.)
Page 110 Displaying the phonebook data in order of Japanese syllabary Show All Names The phonebook data is displayed in the order of Japanese syllabary as shown below: あかさ他 Line (a) → line (ka) → line (sa) →…→ (others) including alphabets, numbers, readings which start with blank, symbols and no reading.
Page 111 Searching by the call or mail frequency rank Ranking Search The phonebook data saved in the FOMA terminal phonebook can be sorted by the number of calls that took place (Call frequency rank) or by the number of i-mode Mail sent or received (Mail frequency rank). ･...
Page 112 Example ドコモ太郎 Searching for “ (Docomo Taro)” Press 4p The phonebook list with readings starting with a kana character in the “た (ta)” line is displayed. In the search result screen, pressing 0 to 9, #, ( or & switches lines.
Page 113 Checking phonebook details Search the phonebook Select a party The details screen is displayed. When Reject/Accept Call, Caller ID Phonebook No. Setting or a secret code is set Name, Name, reading reading Group name Group name Image* Registered icon (tab) is indicated when there is a previous or next page Icon type...
Page 114: Editing Phonebook Entries
Press any of 1 to 3 Show with image ：Displaying the images. Show only name ：Displaying the names. Images are not displayed. Show saved image ：Images are displayed only when the images are registered. If image is not registered, the name is displayed.
Page 115 Copying registered information Copied items can be pasted into the entry field on the screen such as the mail composition and phonebook registration screens. ･ Copied items remain recorded until the power is turned off. They can be pasted any number of times while the power is on.
Page 116: Copying Phonebook Entries
Copying phonebook entries Copy phonebook entries from the FOMA terminal phonebook to the UIM phonebook or from the UIM phonebook to FOMA terminal. ･ If the group in the phonebook data to copy has the same name as the group in the target phonebook, the data is copied to that group.
Page 117: Saving (Restoring/Updating) The Phonebook Data To The Data Center
Select Yes ･ In case of deleting the entry registered in the PushTalk phonebook from the FOMA terminal phonebook, the entry is deleted from the PushTalk phonebook as well. Saving (restoring/updating) the phonebook data to the Data Center Data Security Service You can save the FOMA terminal phonebook data at the Data Center using Data Security Service.
Page 118: Protecting The Secret Phonebook Entries
To cancel Secret Code Setting: c for over a second to clear ･ INFORMATION If a mail address is saved in the phonebook as “mobile phone number＋secret code@docomo.ne.jp”, you cannot reply ● to mail from that party. For the entry with a secret code set, is indicated to the right side of the phonebook No.
Page 119: Checking The Number Of Registered Phonebook Entries
INFORMATION The phonebook data with Secret Attribute set cannot be edited unless Secret Mode is set. ● When Secret Mode is not set, the registered names and images or video/i-motion of the phonebook data with Secret Attribute ● set are not displayed in the incoming screen, redial data, received call history, recorded messages, talking voice memos, mail reception result screen, received mail list and other screens.
Page 120: Using Simple Dialing To Make Calls
Using simple dialing to make calls Quick Dial Phone calls or PushTalk calls can be made by simple operation to the parties with the phonebook No. 0 to 99 in the FOMA terminal phonebook. ･ The first phone number in the phonebook data is the number to be dialed. Example Calling the phone number with phonebook No.2 Enter the phonebook No.
Page 121 Checking the communication log You can check the log of communicating with the Data Center ･ Up to 30 accesses are recorded. When the number exceeds 30, the oldest one is deleted chronologically. m682 Select the log Specifying whether to send images saved in the phonebook Specify whether to send images saved in the phonebook to the Data Center Default OFF m683...
Page 122 Sounds/Displays/Lights Settings Sound Setting Changing the FOMA terminal sound ......... Sound Setting Setting the effects of stereo, 3D sound and surround ..................Stereo Sound Effect Using vibrator to signal incoming calls and alarms ..Vibrator Setting Setting the alert sound for charging ........Charge Alert Setting the alarm announcing that the call is about to be cut off ....................
Page 123 Sound Setting Changing the FOMA terminal sound Sound Setting Set the sound to announce the reception of call, PushTalk call, mail, Message R/F, etc. In addition, the sound generated for the alarm clock sound, schedule reminder and the various operation sound can be set.
Page 124 Setting music data There are two procedures for setting music data as ring alerts: full song ring tone and point ring tone. Full song ring tone sets the whole music data. Point ring tone sets the part beforehand decided of the music data. ●...
Page 125 Priority of ring alerts Ring alerts set in multiple functions sound by priorities given below: a Incoming setting of Multi Number b Alert by Contact of the FOMA terminal phonebook c Alert/Image by Group of the FOMA terminal phonebook d Sound Setting ●...
Page 126 Setting the sound generated when pressing keys or rotating the Speed Selector Keypad Sound/Speed Selector Sound ･ When the keypad sound is changed, the confirmation sound for displaying the battery level is also changed. ･ The keypad sound is not generated when pressing the following keys or sliding the keylock switch. ・...
Page 127 Setting the sound generated when opening/closing the lens cover Lens Cover Sound The settings of this function are also reflected to the settings for Still Image Setting. ☛P177 ･ Default Open cover sound: Open cover sound1 Close cover sound: Close cover sound1 m81155 Press p Select each item to set...
Page 128 3D Sound The 3D sound function allows to create sounds, that is 3-dimensional and special sounds, using the stereo speakers or the supplied stereo earphone, etc. Very realistic ppli games, ring alerts and i-motion can be enjoyed. α This function will become the most realistic when you have FOMA terminal with the front approximately 20 to 30 cm away (the distance may be different between individuals).
Page 129 Setting the effects of stereo, 3D sound and surround Stereo Sound Effect Set the stereo effect when playing video/i-motion, melody or music data. ･ The settings of this function are also reflected to Settings for i-motion (☛P325), melody (☛P331) and music player (☛P368).
Page 130 Priority of vibrator When the vibrator is set in multiple functions, the vibrator operates by priorities given below: a Alert by Contact of the FOMA terminal phonebook b Alert/Image by Group of the FOMA terminal phonebook c Vibrator Setting ● The vibration when receiving a PushTalk call conforms to the setting of Vibrator Setting. INFORMATION The vibrator does not operate when a call is received during another call.
Page 131 Making FOMA terminal silent Silent Mode Disable the sounds from FOMA terminal in order to prevent disturbance to the people around you by enabling the vibrator for incoming calls or muting the keypad sound. Default not set Hold down m or # for over a second The silent mode that is specified in Customize Silent Mode is set and (in the general silent mode) or (in the personalized silent mode) is indicated on the standby display.
Page 132: Changing The Standby Display
Press p Select each item to set ：Sets whether to operate the vibrator for incoming calls, PushTalk calls or mails, etc. Vibrate alert ･ When ON is set, an incoming call or mail is informed by vibration according to Vibrator Setting (☛P126). Note that when OFF is set in Vibrator Setting, the vibrator operates in Pattern A.
Page 133 Select a folder Select the image, video/i-motion or Chara-den To check an image, highlight the image in the image list and press p. The following operations can be ･ performed on the image display screen: Display the previous/next image: % Return to the image list: c Select an image: o ・...
Page 134 INFORMATION While All Lock, PIM Lock (when the data which is subject to PIM Lock is set for the standby display) or Omakase Lock ● (Remote Lock) is on, the set standby image is canceled and the image of the default setting is displayed temporarily. The set standby image reappears when lock is canceled.
Page 135 INFORMATION The following images cannot be displayed: ● ･･･ Created animation Animation Flash movie When Speed selector is set to OFF in Speed Selector Setting, Change image cannot be set to Speed selector. ● In case the power is turned off, the image is not switched. ●...
Page 136 1 to 7 Select an area ･ If the pattern including multiple areas is selected, repeat Step 4. ･ The calendar cannot be set in an area smaller than half of the screen. (e.g. Set Area1 of Pattern 3) ･ Key guidance cannot be set in an area larger than a quarter of the screen.
Page 137 Unread messages ： The reception date and time and the first part of subject are displayed. Select the area when this item is displayed at the beginning to display the received mail folder list. MessageR/ MessageF ： The reception date and time and the first part of title are displayed. Select the area when this item is displayed at the beginning to display the Message R/F list.
Page 138 Changing images to be displayed for incoming/outgoing calls Call Image Menu 8411 / Menu 8511 Changing images to be displayed for outgoing calls Outgoing Call/Videophone Dialing Set images to be displayed for outgoing voice/videophone calls. Default Default Example Setting the image for outgoing voice calls m82321 Setting the image for outgoing videophone calls: m82323 ■...
Page 139 Priority of incoming images When the incoming images are set in multiple functions, the image is displayed by priorities given below: a Incoming setting of Multi Number b The setting of FOMA terminal phonebook* /Alert by Contact of the FOMA terminal phonebook* c Alert/Image by Group of the FOMA terminal phonebook d Call Image (Incoming Call/Videophone Receiving) or Sound Setting* *1 Available when Contact Image is set to ON.
Page 140 Select an image to register ･ For the operation procedure when setting the mail reception result screen, follow Step 2 in “Changing images to be displayed for incoming calls”. ☛P135 For the operation procedure when setting other than above, follow Step 2 in “Changing images to be displayed for outgoing calls”.
Page 141: Changing The Display Color
Setting the time when connecting to the optional AC adapter (Desktop holder) or DC adapter: 2 ■ Setting the time during i-mode: 3 ■ Setting the time while shooting the image with the camera: 4 ■ Setting the time while shooting video with the camera: 5 ■...
Page 142 Menu 8221 Setting the menu display format or menu design Menu Setting The menu display format or the icon design can be changed. Also, you can be set to the simple menu limited only to the often used functions. In the simple menu, characters are also displayed in large size. The design of tile icons and animation set by default for the normal menu ☛P444 ･...
Page 143 Creating the original menu design Two kinds of the design of the menu screen can be created by changing the icons or background images of the normal menu. ･ When the image size exceeds 96 x 96 for icons and 240 x 240 for background images, they are reduced to be displayed.
Page 144 Changing the icon for received signal level Signal Level Icon Default use Style Theme setting m8214 Press any of 1 to 5 When Kisekae tool is set ☛P143 ･ Coordinating according to the color of FOMA terminal Style Theme The standby display, the battery icon, the signal level icon, the clock display, the color scheme and the menu design are coordinated in total by the color of FOMA terminal.
Page 145 Press any of 1 to 5 INFORMATION Even if Time format and Day of Clock Display Format, and Normal of Menu Setting are set, If this setting is set, the ● setting will return to the default state. Menu 58 Using Kisekae tool Kisekae tool If Kisekae tool is set, the ring alert, standby display, menu icon, etc are changed collectively.
Page 146 Resetting the setting: t ■ Enter the terminal security code Select Reset all or Reset menu ･ If Reset all is selected, all the functions changed by Kisekae tool return to the default state. ･ If Reset menu is selected, only Animation menu, Menu icon (with focus) and Menu icon (without focus) return to the default state.
Page 147 Press p When Machi-chara is set ● When Machi-chara is set, it is displayed on the following screens: ･･･ Standby display* Site display screen* Menu (when displaying tile icons) ･ Speed Menu (when calling by voice) *1 The display range of Machi-chara becomes narrow when Show ticker in i-Channel Ticker is set to Yes. *2 Machi-chara is displayed when the display lights up and there is no key operation for about 30 seconds while is blinking.
Page 148 ■ Setting for incoming videophone call, incoming call, incoming mail, incoming Message R, incoming Message F, incoming chat mail, incoming PushTalk call, during a call, Position Location, Notify Location, Location Request-accept, Location Request-verify, alarm clock, schedule alarm, playing melody, opening slide or closing slide: 1 to 5 a Select Pattern field ･...
Page 149: Changing The Font Size
Flashing the Enter key when receiving new information Indicator Light The Enter key flashes when there is new information such as missed calls, unread mails, etc. Default ON m826 Press 1 To cancel the setting: 2 ･ INFORMATION Even when ON is set, the Enter key does not flash in the following cases: ●...
Page 150: Setting The Clock Display
Setting the character size on the mail view screen: m8633 ■ ■ Setting the character size on the message text entry screen or the character entry screen by full- screen entry (notes, etc.): m8634 Press any of 1 to 5 Press 1 to 3 when setting the character size for i-mode view or Mail view.
Page 151 Displaying Digital 3 Displaying Digital 4 Displaying World Time by 24 hour format by 12 hour format Clock by 24 hour at the center at the bottom format at the center m8614 Press p Select each item to set ：Sets whether to display the clock. Style ･...
Page 152 Safety Settings Security code Security codes ....................150 Changing the terminal security code ....Change Security Code Setting the PIN code ..................152 Unblocking the PIN lock .................153 Restricting Mobile Phone Operations Various lock functions ...................154 Preventing unauthorized use of your terminal ......All Lock Using Omakase Lock ............
Page 153: Security Codes
DoCoMo e-site and usage of network services. You can optionally change the code. If you have “DoCoMo ID/Password” for “My DoCoMo” which is the total support site for PC, you can perform the change procedure for a new network security code from a PC.
Page 154 PUK Contact Enter a PIN2 ･ Connection to FirstPass 10 times in a DoCoMo Shops code compatible sites Changing the terminal security code Change Security Code ･ Enter the 4 to 8 digits number for the terminal security code.
Page 155: Setting The Pin Code
Setting the PIN code ･ Enter the 4 to 8 digits number for the PIN1/PIN2 code. Setting to require the entry of the PIN1 code when turning the power on PIN1 Code ON/OFF Time of subscription m8343 To set not to require the PIN1 code entry: 2 ･...
Page 156 ･ Please be notified that, if you forget the PUK or the PIN lock is blocked completely, you need to bring FOMA terminal, the UIM in use, and the identification (driver’s license, etc.) to a DoCoMo Shop. Example Unblocking the PIN1 code’s lock o on the confirmation screen of the PIN code’s lock...
Page 157: Various Lock Functions
Restricting Mobile Phone Operations Various lock functions A variety of lock functions are available to prevent unauthorized use of your FOMA terminal by others or to keep your private information and the phonebook entries confidential. You can select the function to suit your needs.
Page 158 Using Omakase Lock Omakase Lock This is a service that you can lock your FOMA terminal using remote control by informing DoCoMo or by operating from My DoCoMo in case it is lost or stolen. The contents of your important private information and Osaifu-Keitai are protected.
Page 159 INFORMATION Even if other functions are activated, those functions are ended and Omakase Lock is set. When there is data during ● editing, the data is saved and the function is ended Even if other lock functions are used, Omakase Lock can be set. ●...
Page 160: Prohibiting Keypad Dial
When PIM Lock is on ･ The following operations (the whole operation or part of the setting) become unavailable. ・・・ Mail/Chat Mail/SMS/Message R/F* Check i-mode Message i-mode/Full Browser ・・・ i-channel ppli Phonebook/PushTalk phonebook α ・・ Answer Machine/Voice Memo Data Box (My Picture, Melody, etc.) ・...
Page 161 Press 1 Enter the terminal security code Keypad Dial Lock is set and is indicated on the standby display. ･ To cancel the setting: Enter the terminal security code Unavailable operations when Keypad Dial Lock is on ･ Dialing from the received call history or redial data* ･...
Page 162 Loc. history (GPS)： Sets for using the location log. Auto start ：Sets the time period until Privacy Mode is started automatically, if no operation is performed during standby. INFORMATION If all items except Auto start are set to Show all, Privacy Mode is not activated. In addition, when Privacy Mode has been ●...
Page 163 Preventing key errors Key Lock Disables the key operations and prevent wrong operations while you carry the terminal around by putting it into the bag, etc. ･ Key Lock can be set/canceled even when the screen other than the standby display is displayed. However, the setting is unavailable until the standby display appears after turning on the power.
Page 164 Setting Key Lock automatically Key Lock Timer Key Lock can be set to be active automatically when the preset time (10 seconds to 5 minutes) has elapsed in the standby display. ･ In case Key Lock Setting is set to OFF when slide open, the setting is valid only when FOMA terminal is closed.
Page 165 Rejecting/accepting incoming calls from the specified phone numbers Reject/Accept Call Reject/Accept Call is set for each phone number registered in the FOMA terminal phonebook. ･ To use this function, set Reject/Accept Call for each phone number and then enable Reject/Accept Call in this setting.
Page 166 INFORMATION If a call with no caller ID is received from a party that you set Reject Call to, FOMA terminal operates according to ● Anonymous Caller regardless of this function’s setting. In case no phonebook data for setting to Accept call exists, in this setting, when selecting Accept call, a message appears ●...
Page 167 INFORMATION When Call Rejection has been set, the rejected calls are recorded as missed calls in the received call history. ● Standard image may be set for Show image when the video/i-motion with only sounds (i-motion with no image such as ●...
Page 168: Using Data Security Service
Data Center to a new FOMA terminal by operating in i-mode. In addition, you can edit easily the saved data in the Center from a PC by operating on the My DoCoMo web page and reflect the edited data to your FOMA terminal.
Page 169 Other “Safety settings” Other “Safety settings” The following Safety settings can be used: Purpose Function or Service Page To enable safe and reliable data communications by using the FirstPass P189 electronic authentication service, “FirstPass” (FirstPass-compatible P207 sites only) To receive only necessary mails out of large-volume messages Receive Option Setting P247 received...
Page 170 Camera Before using the camera.................168 Shooting still images..............Still Camera Recording videos..............Movie Camera Setting the still image/video size or the saving method ............Still Image Setting/Recording Setting Shooting by various methods ................179 Changing the settings during shooting............180 Sending still images shot during voice calls ....One-shot Message Using Bar Code Reader.............Bar Code Reader...
Page 171 ･ The in-camera in FOMA terminal uses CMOS technology. Note that in darker places, a CMOS Before using the camera camera may take a slightly grainier picture compared to one taken by the out-camera (regular CCD camera) and this grainness is not an error. Still images and videos can be shot with your FOMA terminal camera.
Page 172 ･･ If the battery power goes out before saving a shot The volume of the shutter or countdown sound still image or video, it is not saved. cannot be changed. ･･ Because the camera consumes a lot of battery power, You can change the type of the shutter sound in do not leave the camera activated long time or do not Still Image Setting or Recording Setting.
Page 173 During video recording, when the horizontal shot for ● Compact light 320 x 240 (QVGA) is taken place, Indicates when the compact light is on. (recording standby), (recording) and ☛P172, P176 (in pause) are indicated and the display position for the counter is changed: Macro in the macro mode.
Page 174 INFORMATION Maximum recording time of videos The file name and display name can be changed after ● shooting. ☛P345 The video recording time available varies depending on the size restrictions, image size, quality and recording type settings and the recording conditions. Maximum number of saved still images ･...
Page 175 Open the lens cover Total recording time (microSD memory card) Still image shooting is The estimated total recording time of video clips that activated. can be saved in the microSD memory card is ･ You can also activate described below for each of 64 MB card. still image shooting Upper row in a cell: Video &...
Page 176 a Set the object which you want to focus ･ Even when the memory to save is set to the in the center of the screen microSD memory card, the image is saved The orange focus frame is displayed. to FOMA terminal. ･...
Page 177 ■ Saving as mirror image (only when The following should be set for the out-camera and the ● shooting with the in-camera): m53 in-camera separately. When you switch between the cameras, the settings are also switched accordingly. ･ When a frame is set, mirror image saving is ･...
Page 178 Open the lens cover View and confirm the still images shot continuously Still image shooting is activated. ･ You can also activate still image shooting by ･ Functions available on the image confirmation holding down C for over a second. screen are the same as in normal shooting.
Page 179 ･ To retake another video without saving the shot video: c Recording videos To play the video: p ･ Movie Camera For auto-playing ☛P179 ･ Sending via mail: a ･ At the time of purchase, the video with sound is set to ■...
Page 180 Inserting a ticker: m32 ■ Select Yes If an alarm clock sound, schedule alarm or battery alarm ● interrupts recording, you may hear the alarm clock The recorded video is saved and the ticker sound, schedule alarm or battery alarm at the end of the setting screen is displayed.
Page 181 Press p Select each item to set Continuous shot photos ： Set the number of images to be shot ■ Checking the number of still images that can be shot (estimate): m continuously (2 to 6 images). Auto save ： The number of still images that can be shot If Auto save is set to Yes, the shot still image is (estimate) is displayed for each image size...
Page 182 Auto Play ： Max. display Zoom Image size magnification scale Set whether to play the video/sound automatically when the image confirmation 960 x 1280 (SXGA) 3 times 32 scales screen is displayed. 1200 x 1600 (UXGA) 2 times 6 scales Auto save ：...
Page 183 Point the camera at the object and press o or C Changing the settings during shooting The countdown sound is heard and the auto timer starts countdown. The indicator and ･ The following settings will be maintained even after counter show an estimate of the remaining time you terminates still image shooting or video recording.
Page 184 Soft touch ： Full auto ： Blurs the outlines to soften the image. Standard scene mode/effect. Use this mode Mono tone (red) ： normally. Sensitivity up ： Shoots in monotone of red gradation. Mono tone (green) ： Enhances the camera sensitivity for shooting in the dark.
Page 185 the flicker adjustment setting according to the local White balance power supply frequency. Natural color tone coordinated with the light source is provided for shooting. Frames Auto ： You can select frames saved in FOMA terminal or Adjusts white balance automatically. frame images downloaded from sites.
Page 186 HQ ： Image size The video motion becomes smooth. You can set the following image size: STD ： Provides the standard quality Shooting Icon Image size Remarks LP ： method Still 96 x 72 (phonebook) Provides the lowest quality. The file size is Camera reduced and the recording time becomes the 128 x 96 (Sub-QCIF)
Page 187: During A Voice Call
Flicker adjustment Restoring the default settings for shooting If you set the flicker adjustment according to the Reset the settings for the scene mode/effect, power supply frequency of the area of use when the brightness, color density, white balance and flicker screen flickers under a fluorescent light etc., the adjustment to the default settings.
Page 188 When scanning is paused such as while a The left QR code shows the text submenu is displayed, the icon indicated at data “FOMA D903i”. the upper right of the screen changes to Re-scanning the code: p ■ Press m4 Scanning the code The scanned data is saved to FOMA terminal.
Page 189 ･ To update saved entries, select the party to Scanning divided QR codes add the data. When the data is divided into multiple parts (up to ■ Adding all data to the phonebook at one 16), scan them one by one according to messages 1 or 2 time: Select Add to phonebook displayed on the screen.
Page 190 i-mode/i-motion/i-channel What’s i-mode? ....................188 Displaying sites Displaying i-mode sites ..................188 Reading and operating sites ................190 Using My Menu ................My Menu Changing your current i-mode password ..Change i-mode Password Displaying Internet websites ........Internet Connection Registering websites and i-mode sites for quick browsing ... Bookmark Saving site contents .............
Page 191: What's I-Mode
If you have a PC, data such as mail and bookmarks can be ● saved to the PC by using the DoCoMo keitai datalink and the FOMA USB cable (optional). If you subscribe to Data Security Service (charged), you can save mails in the Data With i-mode, you can use online services such as Center.
Page 192 Displaying an ordinary page from an SSL page INFORMATION When you display a site containing an image, the ● A confirmation screen appears. Select Yes to display following icons may be displayed instead of the image: an ordinary page and disappears on the top of ：When Not display is set for Image in Image &...
Page 193: Reading And Operating Sites
Menu 233 INFORMATION Reconnecting to the last page displayed Some images may have links. ● Last Visited URL On the character entry screen allows you to enter the ● phonebook data, registered contents of Own Number Last Visited URL allows you to quickly reconnect to and character strings information of the JAN or QR code the page displayed last.
Page 194: Using My Menu
Displaying the previous or next page Scrolling the screen FOMA terminal keeps a record of the last 20 pages displayed in a “cache”. ･ When there are more rows or Cache is a storage space in FOMA terminal that links not shown on the screen, temporarily records the displayed pages.
Page 195: Changing Your Current I-Mode Password
A message is displayed when received data exceeds the ● you need to bring the identification (driver’s license, maximum size for a page. Press o to clear the message etc.) to a DoCoMo Shop. and display the received data. The operation procedures when displaying Internet ●...
Page 196: Registering Websites And I-Mode Sites For Quick Browsing
■ Deleting URL history: Registering in Bookmark a Highlight a URL in the URL history list Display an i-mode site or website To delete all: m42 in the URL ･ Select a folder to save the history list Enter the terminal security bookmark code b Select Yes...
Page 197 Select the registration destination Enter the terminal security code Select ･ The icon numbers ( ) correspond to the dial keys (0 to 9) used to display the site with i-mode Shortcut. Moving bookmarks ･ In the bookmark list, the icon changes from when registered.
Page 198: Screen Memo
Menu 24 Sorting bookmarks Sort Displaying screen memos Bookmarks in the list are temporarily sorted. When you quit the display, By access date returns. ･ All the folders are the target of sorting. Select a screen memo ･ You can select from By access date, By title, By : Ordinary screen memo URL or By access frequency.
Page 199: Save Image
Example Downloading an image from a site INFORMATION Display a site zm61 During screen memo display, press m and select ● Protect or Release. ■ Saving the background image on site: Display a site Go to Step 3 Deleting screen memos Select an image ･...
Page 200: Downloading Melodies From Sites
Enter a display name (up to 50 one-byte or ･ When is indicated in the guide row, Press p press t and press p to save the data to 25 two-byte characters) the microSD memory card. The melody is saved in the i-mode folder of When saving to the microSD memory card, Melody.
Page 201: Downloading Dictionaries From Sites
INFORMATION Downloading Chara-den from sites When you try to download PDF data exceeding 2 ● Mbytes, a message appears indicating that the data exceeds the download size limit and the download fails. For the PDF data in which the total size of i-mode ●...
Page 202: Downloading Kisekae Tool From Sites
･ Setting validity/invalidity of the downloaded INFORMATION original certificate ☛P206 When the memory is not enough or the maximum ● number of saved items is exceeded, a confirmation Display a site Select the original screen is displayed asking whether to delete saved certificate Kisekae tool.
Page 203: Useful Functions Of I-Mode
Example Useful functions of i-mode Copying the URL of current site Display the URL of a site Useful functions of i-mode Displaying the URL ☛P191 ･ Select the start position of the copying Using Phone To (AV Phone To)/Mail To/Web To range Select the end position Press mo to select all the text.
Page 204: I-Mode Setting
Making i-mode settings ･ Information fee may be charged for some i-mode Setting services, but DoCoMo will never charge you for it. ･ Your phone number may be sent to the provider Menu 282 Setting the connection timeout for some sites you visit.
Page 205 Select each item to set Sound effect setting： Specifies whether to play the beep sound of Host name： Flash movie. Up to 16 one-byte or 8 two-byte characters can be entered. Host number： INFORMATION Up to 99 one-byte alphanumeric characters On the site screen or screen memo view screen, press ●...
Page 206: When Message R/F Is Received
Using Message Service INFORMATION When Message R/F is received When the memory is not enough or the maximum ● number of saved items is exceeded, the received Receive Message R/F Message R/Fs except unread ones will be overwritten, oldest first. Be sure to protect Message R/F you want to ･...
Page 207 Vibrate alert: Menu 2631 Sets the vibration of incoming messages. Displaying Message R/F automatically Ring time (sec): Auto-display Sets the sound duration of ring alert (1 to 30 Sets whether to automatically open and display seconds). Message R/Fs for about 15 seconds upon reception. In addition, you can set either of Message R/F to be displayed and also set to give priority to either of Menu 261 / Menu 262...
Page 208 ■ Protecting selected Message R/Fs: Displaying and saving the attached file Select Message R/Fs Display or save images or ToruCa attached to ■ Canceling protection of selected Message R/Fs: m24 Message R/F, or play or save melodies. Select Message R/Fs Example Saving an attached file ■...
Page 209: Displaying Saved Message R/F
: Available No icon: Unavailable : CA certificate Setting validity/invalidity of certificate : DoCoMo certificate/user certificate d851 : Original certificate ･ When you select Original certificate, the list screen appears. Select a certificate.
Page 210 Select Continue INFORMATION DoCoMo Cert2 cannot be disabled. ● The settings for DoCoMo Cert and User Certificate are ● saved in the UIM. Menu 2854 Skipping entry of the terminal security code when using original certificates Skip Password When using an original certificate, authentication is performed by entering the terminal security code.
Page 211: I-Motion
FirstPass way as the i-motion replayed after downloading all data. compatible site concerned. ● Neither DoCoMo nor the certifier provides any Replay after The i-motion file is played after guarantee for security, etc. in use of FirstPass or downloading downloading all data.
Page 212 p：Stop (the message is displayed ･ When streaming type i-motion is selected, a confirmation screen is displayed asking indicating the completion of whether to replay. Select Yes to replay while downloading.) downloading i-motion. ：Display detail information ■ i-motion replayed while the data is being Select Save downloaded: i-motion is replayed while the data is being...
Page 213: I-Motion Setting
Receive display are set to Available in the detail information. In this case you cannot set the i-motion as the ring alert or incoming image. i-channel is a service in which DoCoMo or IP When there is an incoming call in case streaming type ●...
Page 214 However, packet communication fee caused by “Optional channel”. Basic channel is pre-registered viewing detail information from the channel list is to channels provided by DoCoMo and ready for use be borne by the users. immediately after i-channel sign-up. Packet ･...
Page 215: Displaying I-Channel
･ If you cancel i-channel or i-mode service subscription, In the default state or in case the UIM is replaced ● tickers are no longer displayed. Pressing c displays or the host address 2 is changed, if the i-channel the pre-subscription screen. Until the cancellation information is automatically updated or if you press c to display the channel list, the ticker procedure has finished, however, tickers may be...
Page 216 Mail FOMA terminal mail function .................214 Composing i-mode Mail/Deco-mail Composing and sending i-mode Mail ......Compose Message Composing and sending Deco-mail ..........Deco-mail Attaching files ................Attachment Using mail templates ..................225 Saving i-mode Mail for sending later .......... Save Mail Composing mail quickly .............Quick Mail Receiving and handling i-mode Mail Receiving i-mode Mail ............
Page 217 Short Mail Service allows the exchangevb of text i-mode. messages between mova service mobile phones. ■ Changing the mail address [Mail Address (Change Mail Address)] You can change the address before the @ symbol to another, such as “docomo.△△_ab1234yz @docomo.ne.jp”. Mail...
Page 218 If you do not use the mail function, you can stop it ･ You can receive only the mail through the in the i-mode Center. specified carrier(s) out of DoCoMo, au, SoftBank, TU-KA, and WILLCOM. When you cannot receive mail Of the mail through carriers other than...
Page 219 Checking for SMS ☛P256 ･ Address of SMS The address of SMS is the subscribed mobile phone number. ･ You can exchange SMS with users of overseas service provider other than DoCoMo. For more information, visit the DoCoMo website. Mail...
Page 220 ･ Signature must be registered beforehand. ･ When sending mail to an i-mode terminal, you Press p may omit “@docomo.ne.jp” in the mail address. In 5-touch Input Method, press 1 repeatedly ･ Pressing o on the connecting screen or ･...
Page 221 An error message for address unknown etc. may not be ● received when mail is sent to addresses other than INFORMATION DoCoMo. The mail address entered in the field and ● When the memory is not enough or the maximum ●...
Page 222 ■ Flow of Deco-mail composition Select a decoration Enter characters Display the message text entry screen Highlight an icon on Step 1 from the mail composition screen the decoration Start composing i-mode Mail on the selection screen and press o to select a message text entry screen.
Page 223 ･ ■ The color of pictograms 1, 2 is also changed. Making characters blink: Select To return to the original color, specify the range Enter characters and select Default. For operations, see “Specifying decoration method after entering characters”. ☛P221 ■ Changing the font size: Select Select a size Enter characters...
Page 224 ■ Select the decoration method Inserting lines (ruled lines ): Select A line (ruled line) is ･ The procedure for inserted in the color confirming and specified with font canceling color ( decorations is the same as when entering characters after specifying the decoration method.
Page 225 Title Song title (composer name in [ ] ) Attaching melodies to Deco-mail Melo-deco クリスマス JOY TO THE WORLD [HANDEL a on the decoration selection screen (Christmas) GEORGE FRIDERIC/MASON LOWELL] ･結婚式 BRIDAL MARCH When a melody is already attached, the list of (Wedding) [WAGNER RICHARD WILHELM] attached melodies is displayed.
Page 226 ･ *2 Depending on the receiver’s model, video/i-motion For a JPEG image exceeding 2 Mbytes, is not received or displayed correctly, or may be it is automatically reduced to a size that degraded or displayed as continuous images. can be attached to mail. This operation When sending video to other than i-mode Mail may take some time.
Page 227 b Select a folder ■ Attaching ToruCa: For Phone memory, press p in the a Select ToruCa ･･ When inserting the microSD memory folder list to switch between bookmarks card, select ToruCa and select Phone of i-mode and bookmarks of Full memory or microSD.
Page 228 INFORMATION Using templates while composing mail When you send mail with a JPEG image exceeding ● Read Template 10,000 bytes attached to an i-mode Mail (non-compatible m61 on the mail composition screen with 2-Mbyte files) terminal, the image is reduced in the Highlight a template and press p to display ･...
Page 229 When the memory is not enough or the maximum ● Saving templates Save Template number of saved items is exceeded, a confirmation screen is displayed asking whether to delete saved Composed or received/sent i-mode Mail can be templates. Follow the instructions on the screen and registered as a template.
Page 230 INFORMATION Saving i-mode Mail for sending later Auto-send mail is not sent automatically while editing the ● signature. Save Mail Once auto-send mail fails to be sent, it is not sent ● automatically inside the service area next time. However, Saving unsent i-mode Mail when sending is failed due to outside the service area, mail is resend up to twice.
Page 231 Receiving and handling i-mode Mail Composing mail quickly Receiving i-mode Mail Quick Mail Mail Auto Receive ･ You can compose i-mode Mail and SMS easily to The maximum number of items that can be saved ☛P34 the parties saved to the phonebook No. 0 to 99 in the FOMA terminal phonebook.
Page 232 When the memory is not enough, or the maximum number If there is unreceived i-mode Mail in the i-mode Center, ● ● of saved items is exceeded, the oldest received mail is indicated. However, the icon may not be except unread one is overwritten. Be sure to protect displayed even when there is i-mode Mail in the i-mode received mail you want to keep.
Page 233 Menu 163 Menu 161 / Menu 25 / 61 / Selecting mail to receive Checking for i-mode Mail Check i-mode Message Check the subjects of i-mode Mail stored at the i-mode Center and then select mails to receive. You You can check whether i-mode Mail has been can also delete mails at the i-mode Center before delivered to the i-mode Center while FOMA receiving.
Page 234 Select a quick reply message Highlight a mail Sender’s mail address or phone number of the “FW:” followed by the received mail subject of the received “RE:” followed by the mail (for only i-mode Mail) subject of the received mail (for only i-mode Mail) Received message text Quick reply message...
Page 235 *1 Can be attached to mail and output from FOMA Checking the type/download status of terminal. attachment *2 Cannot be attached to mail and output from FOMA terminal. Select a folder Select an i-mode mail with the file attached Downloading the attachment for selective reception Icon for attachment, file name and file size...
Page 236 ･ For ToruCa, the screen to select the Playing and saving melodies registration destination (FOMA terminal or the microSD memory card) is displayed. ･ If the sender uses a terminal other than FOMA Depending on ToruCa, only one of registration D701i, D701iWM, D702i, D702iBCL, D702iF, destinations may be selected.
Page 237 ･ When the memory is not enough or the maximum When inserting the microSD memory card, ● press t to switch saving destinations (FOMA number of saved items is exceeded, a confirmation screen is displayed asking whether to delete saved terminal/microSD memory card).
Page 238 Example Displaying received mail in Inbox The location to save attachments To display sent mail in Outbox: a5 ･ Attachments are saved in the following locations by ･ To display unsent mail in Unsent messages: the file type. Some data may not be saved to the microSD memory card.
Page 239 ･ For SMS which contains an error, Received mail list screen indicated and the reception date/time becomes “--/--” (only on the reception day). Page No./total number The sender is not displayed. Reception date/time* sender Subject (for SMS, Sent/unsent mail list screen beginning of message) *1 For mail received when Page No./total number...
Page 240 Notify missed call for SMS) request call ：Sender (unable to reply) Sender Phone SMS Center DoCoMo SMS ：Receiver (To) (unable to reply) (only number i-mode Mail) ･ When the caller ID is not notified, the following ：Receiver (CC) (unable to reply) (only...
Page 241 ■ Changing folder settings: Highlight a Checking mail addresses Display Address folder You can view an entire mail address when the whole ■ Moving up or down the folder: Highlight a 7 or 8 address is not displayed or when the address is folder registered in the phonebook and only the name is Press p...
Page 242 Searching mail Sorting the received/sent mails Mail Search Sort Search received/sent mail by specifying sender/ You can temporarily change the order of received or receiver or by received/sent date. sent mail in the list. Closing the list resets the sorting ･...
Page 243 ■ Changing all the mails in the folder to Deleting received mail read: m55 Select Yes ○: Available ×: Not available Screen for starting operation Deletion method Protecting received/sent mail Protect Mail Folder list Mail list Mail view All messages ○...
Page 244 Deleting sent/unsent mail Using Phone To (AV Phone To)/Mail To/Web To ○: Available ×: Not available ･ The operation is the same as when performing Screen for starting operation the Phone To (AV Phone To), Mail To, or Web To Deletion method Mail view function from sites.
Page 245 You can register URLs in the message text of the the receiver of sent mail. i-mode Mail or SMS in Bookmark. ･ The mail address (except “mobile phone number@docomo.ne.jp”) and phone number Example Registering a bookmark from the must be registered in the phonebook. received mail view screen...
Page 246 Select Yes Enter the terminal security Press the key to perform the operation code ･ You can perform the operation in the same way from the details screen of the log. The selected mail is saved in the Data Center. Composing i-mode Mail: a When saving is completed, the result is ■...
Page 247 ■ Setting whether to display an image on the ･ On the received message log list or details screen, if you press m and select Sent msg log details screen:m9 on the details 1 to 3 screen of the log log, the sent message log list is displayed.
Page 248 ■ Specifying a subject: Setting sort criteria Sorts mail having a subject that includes the ･ To set and activate the criteria, set auto sort to specified characters (up to 30 one-byte or 15 ON for received mail and sent mail. It is set to ON two-byte characters).
Page 249 ● set as the mail address, only the phone number is received as the address. Therefore, no sorting occurs when “mobile phone number @docomo.ne.jp” is specified in the criteria. To sort sent mail automatically 2 ･ When the same mail address is registered in both of the ●...
Page 250 Menu 196 INFORMATION Registering addresses in a mail group The signature text is counted as characters in the ● Mail Group Setting message. If there is no available space for number of characters of the signature and line feed, a signature By registering multiple mail addresses in a mail cannot be inserted.
Page 251 Press p Enter the message (up to 40 one-byte or 20 Highlight a mail group and press a to two-byte characters) Select Yes ･ compose i-mode Mail. ･ A line feed cannot be inserted. ■ Viewing a registered message: Highlight a Menu 1951 message in the quick reply message list Setting whether to quote the message when...
Page 252 ･ For the following screens, Only View is not Menu 1974 / Menu 2633 / available. Setting whether to play melodies automatically ･･ Entering characters Listing Attachment Auto-play ･･ Deco-mail Chat mail You can set whether to play melodies attached to Default OFF i-mode Mail or Message R/F automatically when the a976...
Page 253 ･ The settings in this function are reflected to Mail Menu 191 view of Font Size Setting. Setting operations for incoming mail Mail Alert Default Medium (standard) You can set the operations that are performed when i-mode Mail or SMS is received. ･...
Page 254 Show message ： Chat mail screen Displays the receiving screen, reception result screen and sending screen for auto- send mail even if FOMA terminal is operated. Sender’s nickname : Receiving/sending when staying overseas INFORMATION (except for the case When Continue operation is set, the receiving screen, ●...
Page 255 ■ Select the text entry field Enter a Selecting from the sent massage log: Select a log message (up to 500 one-byte or 250 two- byte characters) ■ Selecting from the received message log: Select a log ■ Copying and pasting text from chat mail Searching the phonebook: m3 log: ■...
Page 256 Displaying broadcast addresses When chat mail has not been started Broadcast addresses of received mail can be Chat mail is saved in the Inbox folder of Inbox as displayed. i-mode Mail. However, when received chat mail matches the criteria set in Sort Criteria, it is saved in Highlight a mail on the chat mail screen Press m4 the specified folder.
Page 257 ･ than DoCoMo. Please visit the DoCoMo website The settings of this function are also reflected to for the countries where the service is provided Sound Setting, Light Alert Setting and Vibrator Setting.
Page 258 number (add “010” when replying to a received The font type and whether to receive the delivered report ● must be set in SMS Setting beforehand. You can also SMS message from overseas). change the settings for the delivered report and storage ･...
Page 259 When SMS is received from overseas carriers other than ● ･ When you select Others for SMSC and DoCoMo, “+” is added before the sender address. If the enter only numbers or numbers plus “ ” sender address prefixed with “+” it is registered in the or “#”...
Page 260 SMS Center is displayed as the sender of INFORMATION On the received/sent mail view screen, press m and delivered report and DoCoMo SMS as the ● sender of missed call notice. select Move/Copy → Move to UIM or Copy to UIM.
Page 261 Deleting all the messages: m23 ■ INFORMATION Enter the terminal security code When you reply to/forward or resend SMS in the UIM, the ● sent SMS is saved in Outbox of FOMA terminal. ■ Deleting all the delivered reports: Enter the terminal security Moving/copying SMS from the UIM to FOMA code terminal...
Page 262 i- α ppli i-αppli ......................260 Downloading i-αppli from sites ..............262 Starting i-αppli ....................263 Using pre-installed i-αppli ................266 Starting i-αppli with One-key Shortcut ......One-key Shortcut Starting i-αppli with Two-key Shortcut ......Two-key Shortcut Automatically starting i-αppli ...............272 Starting i-αppli from sites or mails .......... i-αppli To Operating the i-αppli standby display ....
Page 263: I-Αppli
･ Obtain images from Data Box ･ Save images and videos in Data Box ppli α ･ Refer to or obtain ToruCa ･ Save ToruCa ･ Use the microSD memory card Downloading i- ppli software from sites allows α more convenient use of i-mode compatible FOMA INFORMATION terminal (hereinafter called the i-mode terminal).
Page 264 INFORMATION Other convenient functions With i- ppli DX, communication may be made to confirm ● α ■ i- ppli standby display the validity of i- ppli regardless of the NW transmission α α setting of i- ppli. The number of attempts to make On the i- ppli standby display, i- ppli can be...
Page 265: Downloading I-Αppli From Sites
Select a folder to save A confirmation screen appears asking whether to Downloading i- ppli from sites α use the i- ppli. α ･ With some i- ppli, the software settings/startup α ･ confirmation screen appears for the standby Maximum number of software that can be saved ☛P34 display (Set i- ppli display), the NW...
Page 266: Starting I-Αppli
･ Message i- ppli can be saved up to 5 α List display Thumbnail display applications (included in the 100 maximum ∼ number of i- ppli applications). If the maximum α number of Message i- ppli is exceeded, follow α the instructions on the screen to delete an existing Message i- ppli folder (when the folder...
Page 267 Press o When you are outside the service area or the saved data ● cannot be used, i- ppli may not start or not operate α ･ When Confirm every session is set for NW correctly. transmission of i- ppli to be started, a α...
Page 268 Start from browser： Displaying i- ppli detail information α Detail Info Set whether to permit starting i- ppli (i- ppli α α To) from sites. Detail information such as the name and version of Start from ToruCa： ppli can be checked. α...
Page 269: Using Pre-Installed I-Αppli
If Yes is set for Use icons, information about icons for ● INFORMATION unread mail, unread Message R/F, remaining battery Some i- ppli allows you to choose another i- ppli to ● α α level, Silent Mode, and icons within service area/outside activate.
Page 270 ･ The kind of fish available and fishing level b Control the lure and wait for a bite requirements vary depending on time and fishing ･ When the lure has sunk to the bottom of the spots. lake, wind the reel by rotating Speed Selector (manual reel) or holding down o for over a ･...
Page 271 ステージエフェクト Setting pocket-money: (Stage effects)： Press o, select おこづかい設定 (Set You can select either stage effects pocket-money) and set the income day, the (background color/ background pattern) or present money in hand or the monthly background animation. income amount. p registers the data. ･...
Page 272 未送信ボックス (Unsent messages)：便利！多機能電卓 (Useful! Multifunction Displays mail that failed to be sent. Calculator) 保存データ (Saved data)： In addition to basic calculation, this i- ppli provides α Displays mail saved before being sent. several useful calculation functions such as センター問い合わせ (Check new message)：...
Page 273 時間計算 (Time duration) ：Ｇガイド番組表リモコン(G-GUIDE TV Remote Calculates the time duration from the start Controller) date/time to the end date/time. To set the start date/time and end date/time, press o , ･ The display shown here highlight the position to be changed with &, change the digits with % and then press represents an example.
Page 274 ･ Packet communication fee is required separately. “DCMX” is a credit service that NTT DoCoMo group Osaifu-Keitai compatible i-αppl provides for the iD credit payment service. DCMX is available in three types: DCMX mini, DCMX and ケータイクレジット「iD（アイディ）...
Page 275: Starting I-Αppli With One-Key Shortcut
α ppli. α ･ When you select a dial key that has already ● DoCoMo assumes no responsibility for the been assigned an i- ppli application, a α information saved in the IC card. confirmation screen appears asking whether to overwrite it.
Page 276 ･ When Privacy Mode is on (with Authorized access set to Setting the date and time of Auto Start α ppli) Auto Start Info Setting ･ The alarm clock sound or schedule reminder is now sounding (including when the set time is the same as Set Auto Start on/off or the start time for each i- ppli α...
Page 277: Starting I-Αppli From Sites Or Mails
While the i- ppli standby display is activated, if an error ● α that makes it difficult to continue the i- ppli standby α Starting i- ppli from sites or mails α display occurs, a confirmation screen appears asking ppli To α...
Page 278: Managing I-Αppli
IC card is deleted, a stored by the i- ppli may be erased. α Some i- ppli may inquire the DoCoMo server about the ● α confirmation screen is displayed asking availability depending on the length of time of use/ whether to delete i- ppli other than that.
Page 279 ･ If the i- ppli to be deleted by Selected items or α Protecting i- ppli α All items includes Osaifu-Keitai compatible ppli that cannot be deleted unless the data α ･ Maximum number of i- ppli that can be protected α...
Page 280 Speed menu shortcut： Sorting i- ppli α Sort Software The name and storage folder of i- ppli α registered to Speed Menu are displayed. Default By download time Auto start： m321 Name, storage folder and start time of ppli set for the next automatic start are α...
Page 281: Using Various Functions From I-Αppli
Using various functions from i- ppli α ･ Downloading i- ppli that supports individual α functions beforehand is required. ･ The operation varies for each i- ppli application α and some i- ppli may not be used. α Using the camera from i- ppli α...
Page 282 Osaifu-Keitai/ToruCa What’s Osaifu-Keitai? ..................280 What’s iC transfer service? ................281 Starting Osaifu-Keitai compatible i-αppli ............281 What’s ToruCa? ....................282 Obtaining ToruCa ...................283 Displaying ToruCa ..................284 Setting ToruCa ....................286 Preventing use of IC card functions ........IC Card Lock...
Page 283: What's Osaifu-Keitai
Please note that you will be required to delete the data before repair. If the data in the IC card should be lost or modified, DoCoMo assumes no The i-mode terminal which is equipped with an IC responsibility for the loss of data. In case you...
Page 284: What's Ic Transfer Service
Osaifu-Keitai compatible service by downloading Osaifu-Keitai compatible i- ppli. α iC transfer service is available at a DoCoMo Shop. *1 A fee is needed for use of iC transfer service. （There is the case that fee is not needed.） Also,...
Page 285: What's Toruca
How to get ToruCa What’s ToruCa? Site ToruCa is an electronic card that is available Reader/Writer through Osaifu-Keitai, which can be used as a flyer, restaurant card, coupon, etc. You can obtain ToruCa from the reader/writer and sites and exchange the obtained ToruCa easily by using mail, infrared communication, and microSD memory card.
Page 286: Obtaining Toruca
■ When Auto-display is set to ON in ToruCa Setting: Obtaining ToruCa The obtained ToruCa is displayed only on standby display. It will be displayed for about 15 seconds, if you do not press any key. To ･ Maximum number of items that can be saved return to the standby display immediately, ☛P34 press c.
Page 287: Displaying Toruca
The location information included in the displaying text ● can be used. ☛P302 Displaying ToruCa To register new data in the phonebook, highlight the ● phone number or mail address on the view screen and press m41. To update the data in the phonebook, press m42.
Page 288 INFORMATION Creating/deleting folders In the view screen, press m3. ● ･ You cannot change the folder name or sort order or delete the ToruCa or Used ToruCa folders. Checking the information of the saved ToruCa Press m5 Creating a folder Information such as the number of ToruCa saved ･...
Page 289: Setting Toruca
m8522 Sorting ToruCa Sort Press p Select each item to set You can change the sorting order of the ToruCa list temporarily. Ending the display returns to the order ToruCa receive： By date. Specify whether to obtain ToruCa. ･ You can select the order by date, genre, title, Duplication check：...
Page 290 Select Sort to field Select the folder to Sorting ToruCa automatically into the folders sort ToruCa Sort Rule Set sort criteria for ToruCa obtained by reader/writer. ･ Up to 20 criteria can be registered. ･ To enable this setting, set Auto-sort of ToruCa Setting to ON.
Page 291: Preventing Use Of Ic Card Functions
Canceling Specifying whether to use auto reading function ToruCa Auto-read ･ When Voice SecurityCode is set as the procedure for canceling IC Card Lock, and voice keyword for Auto reading function moves the ToruCa to the Used authentication is recorded, voiceprint ToruCa folder automatically when you attempt to get authentication is needed for canceling IC Card it by holding your FOMA terminal over the reader/...
Page 292 ･ Please do not make the sound that is unrelated INFORMATION to the voice data, such as clearing your throat, You can also set/cancel in shortcut operations. ● m642 or m83131 “Uh...”, or tongue-clicking. In addition, please do Enter 1 or 2 not blow your breath to a microphone.
Page 293 Enter the terminal certification. For any damage or loss, which the user security code shall sustain by having been used by a third party or misauthentication of voiceprint, NTT DoCoMo assumes Press 2 no responsibility. ･ To continue a state of IC Card Lock just before...
Page 294: Gps Function
GPS Function What is the GPS? ....................292 Checking your current location ........Position Location Using the navigation function ........... Navigation Using GPS-compatible i-αppli ......GPS-compatible i-αppli Providing the current location information in response to a request ....................Location Request Notifying the current location information ......Notify Location Displaying the confirmed log of location information ..
Page 295: What Is The Gps
Keitai-Osagashi Service, visit the DoCoMo website. What is the GPS? *1 If you set Request Permit/Deny (☛P297) to Always permit or Permission schedule, the location information may be sent to searchers The Global Positioning System (GPS), which is...
Page 296 You are connected to i-mode and a map is The positioning starts. displayed. After the map is displayed, you can Blinking while positioning use i-area to check the peripheral information. For details on i-area visit the DoCoMo website. ppli: 2 ■ Starting GPS-compatible i- α...
Page 297: Using The Navigation Function
Setting the function to be performed when you check your current location ･ If you have changed Post-Position Task any i- ppli to be α Set a function that is to be performed upon started from Speed completion of positioning when you activate Position Menu, you need to Location from the custom menu.
Page 298: Using Gps-Compatible I-Αppli
･ Searching is performed with the current time as Menu items Description the departure time. 現在地 (GPS) (Current Displays a map of the ･出発地に設定 You can also perform selecting location (GPS))* current location and 目的地に設定 (Set as Departure Place) and (Set peripheral information.
Page 299: Providing The Current Location Information In Response To A Request
(common to (Permit) and 報利用設定 ). For details about the imadoco- (Confirm each time)) search setting, visit the DoCoMo website. ･ When a location request comes, FOMA terminal ･ When using the Location Request function, you sounds and vibrates and the Enter key lights or...
Page 300 ･ The display items should be interpreted as Repeat： follows: ･ If you set None, the Location Request function is enabled only once. : Recipient name : Requester name* ･ If you set Every day, the Location : Requester ID Request function is enabled everyday *1 If the requester ID matches the phone number from the start time through the end time.
Page 301 Starting at 17:00 this day, 17:00 17:00 06:00 to 6:00 next day from Monday ･ Returning to the DoCoMo connection setting: through Friday Select Host field Select DoCoMo Go to ■ If the Repeat setting is Every day or Day of week...
Page 302: Notifying The Current Location Information
When using the Notify Location function, you Confirm each calling should follow what the service provider or When you call the registered phone number, your DoCoMo website says. current location is determined and notified to the LCS client. Registering Location Service (LCS) clients ･...
Page 303: Displaying The Confirmed Log Of Location Information
Notifying the current location Displaying the confirmed log of location The current location is determined and the location information Location Log information is sent. Display the results of positioning performed for m6951 Position Location, Location Request and Notify Location. You can use location information to Select an LCS client display its map and send it by i-mode Mail.
Page 304: Using Location Information From Various Functions
■ Obtain the location information Using the location log: Determining the current location: 1 ･ You cannot use the location log if the ■ positioning has failed. Obtaining from the location log: 2 ■ a Highlight the location log Select a location log b Selecting a function from the location information menu ■...
Page 305: Setting The Mode, Sound And Lighting For Positioning
The quality mode takes its time for positioning. to check the peripheral information. For details This may allow the quality mode to achieve better about i-area, visit the DoCoMo website. accuracy than the standard mode. Default Standard mode Sending location information to the site...
Page 306: Using The Gps Function
Example Setting the positioning alert used with the Position Location function Using the GPS function m6943 ■ Setting the positioning alert used with the ■ Using the GPS function Location Request function: m6965 1 or 2 ･ Using the GPS function may require you to make an i-mode subscription.
Page 307 Position Location or Notify Location function is unavailable. ■ Others ･ DoCoMo will not be held responsible for any economic loss resulting from any error, malfunction, failure or any external factor such as electric power failure (including battery shortage) that leads to unavailability of checking the positioning (communication) result.
Page 308: Full Browser
Full Browser Viewing Internet web pages designed for PC ....... Full Browser Setting Full Browser ............Browser Setting...
Page 309 The following functions are not supported. ● Menu 29 ･･ Viewing Flash movies Plug-in Viewing Internet web pages designed for PC ･･ Playing sound Saving screen memos ･ Full Browser Phone To (AV Phone To) The following icons may appear instead of images. ●...
Page 310 ■ Switching the character encode: Page title m851 ･ appears before the title while the data is ･ Each time you press the key, the character being downloaded. ･ If the page has no title, the URL is displayed. encode is switched in the following order: SJIS Display mode icon →...
Page 311 Example Select a frame in the frame thumbnail Displaying the link destination on a separate window screen Highlight a link on the Full Browser screen Press p15 Thumbnail Enlarged frame The page appears on a new window. The previous page remains in the rear window. ･...
Page 312 Use O to move the pointer. Holding it down ･ Select Yes moves the pointer continuously. You can also ･ Follow the procedure from Step 2 in “Viewing move the pointer by pressing this key at an angle. Internet web pages designed for PC”. ☛P306 If you save the settings or press c with ･...
Page 313 Searching for a character string in the page INFORMATION When the memory is not enough or the maximum ● ･ Searching is unavailable during data downloading. number of saved items is exceeded, a confirmation ･ Some pages may not be searched. screen appears asking whether to delete saved images.
Page 314 FOMA terminal. If you view ･ Please note that NTT DoCoMo is not responsible the same page by PC, you will see a different for any reveal of your information to third parties button in place of Browse.
Page 315 Press 1 or 2 Referer. ･ Please note that NTT DoCoMo is not responsible for any reveal of your information to third parties Menu 2945 because of sending Referer. Setting whether to display images...
Page 316 Displaying/Editing/ Managing Data Making full use of images Displaying images ................My Picture Editing still images ....................316 Setting the operating conditions of images ....Settings (My Picture) Saving the still image in the Data Center ....... Data Security Service Making full use of video/i-motion Playing video/i-motion ................
Page 317 Making full use of images Originated Menu 51 ：Camera ：i-mode Displaying images ：Preinstalled ：Item My Picture ：Data transfer ：Chara-den You can display images saved in My Picture in Type of image Data Box in FOMA terminal. No icon: Still image ：Created animation Select a folder ：Animation/Flash movie...
Page 318 ･･ Animation, Created animation and Flash The display size of the still image may be movies are replayed automatically when being selected depending on the image size. ☛P130 displayed. During playback, the following ･ operations are available: If the i- ppli standby display has already α...
Page 319 ･ Select images Still images not permitted to attach to mail or to output from FOMA terminal (excluding still The number is images with file restriction set with your terminal) displayed on the ･ Still images with either the vertical or horizontal image in the order of size is under 8 dots selection.
Page 320 1 on the edit menu screen O to adjust the position of Change the image size The position of upper left of the range Changing it to the specified size: 1 to specification frame is set and ■ 9 or 0 displayed on the lower right of the frame.
Page 321 Font border color ： Overlaying a frame Sets the text bordering color. Frames set by default ☛P446 ･ Background color ： 6 on the edit menu screen Sets the text background color. Paste method ： The same size frames as the still image being Sets whether to paste all characters edited are listed.
Page 322 0 on the edit menu screen Select a size Setting the operating conditions of images The image is saved as a new image with a size Settings (My Picture) below the specified size in the same folder. ･ Still images with a size larger than 480 x 640 Default Show thumbnails: Yes cannot be set as Msg attach:Small.
Page 323 Making full use of video/i-motion Menu 53 Saving the still image in the Data Center Playing video/i-motion Data Security Service i-motion You can save still images in the Data Center You can play video/i-motion saved in i-motion of using Data Security Service. Data Box in FOMA terminal.
Page 324 File types Play volume： Indicates the current volume. ：MP4 ：MP4 with bookmark ･ In case Size adjustment is set to Normal in ：ASF ：ASF with bookmark Settings, a confirmation message appears *1 Only the files saved in the microSD memory when trying to replay the video reduced.
Page 325 PC or another FOMA When the replay restriction is set terminal using infrared/iC communication or A confirmation screen is displayed before playback DoCoMo’s data link software starts. Replay restriction types and contents to ･ Video/i-motion files except for i-motion...
Page 326 Highlight a video/i-motion file Editing video/i-motion The custom edit mode is activated and displayed. You can edit video/i-motion saved in i-motion. ･ When tickers are inserted in video/i-motion, ･ The following video/i-motion can be edited: a screen indicating that tickers may be deleted ･...
Page 327 ･ If tickers are already inserted, a confirmation Clipping by specifying the file size Edit by Size screen asking whether to delete and edit tickers is displayed. If Yes is selected, all tickers You can clip a part of video/i-motion from the inserted already are deleted.
Page 328 ■ Sending mail with video/i-motion attached: Ticker 1 to 10 ： Displays characters entered on the The video/i-motion with tickers is saved and ticker edit screen. You can enter the mail composition screen with video/ characters. i-motion attached is displayed. Font color ：...
Page 329 ･ Some i-motion data cannot be moved to FOMA terminal. Moving video/i-motion to the microSD ･ Moved i-motion files are saved in the i-mode memory card Movable Contents folder of i-motion in Data Box. i-motion compatible with Movable Contents can m6514 be moved from FOMA terminal to the microSD The folder list of i-motion compatible with...
Page 330 Press o Menu 56 The Chara-den image is displayed. Displaying Chara-den Action mode Chara-den : Action Chara-den set by default ☛P447 ･ : Action of parts ･ Pressing a dial key performs action in Select a folder accordance with the number. Stopping the action: 0 ･...
Page 331 ■ Checking the saved still image/video Video & Voice ： immediately: p Select the still image/ Records Chara-den with sounds from the video microphone. For Chara-den that reacts with ･ When the microSD memory card is selected sounds from the microphone, the mouth in as the memory to save, press p, select the image moves in time with the sounds.
Page 332 If a still image/video is taken from the Chara-den for ● which file restriction is set in Rec.File Restriction of detail © NTT DoCoMo/dentsu information (except for the case with Rec.File Restriction Machi-chara list set with your terminal), this still image/video cannot be Originated saved in the microSD memory card.
Page 333 ･ Note that this is not applicable to Machi- ･ To switch to the folder list of the microSD memory card: t on the folder list chara if part of its data has been Handling the microSD memory card ☛P338 ･...
Page 334 Play background ： http://www.MitsubishiElectric.co.jp/mobile/ Sets the image to be displayed on the 外部メモリ → FAQ of FOMA D903i → screen for playing melodies. To set an (External memory) image in My Picture, set to Select and select The information described in the above sites or an image.
Page 335 It is recommended that the data saved in the delete information from the folder for the microSD microSD memory card be separately backed up memory card. ☛P277 for storage. DoCoMo assumes no responsibility ･ For each folder, the maximum number of data for accidentally erased or changed data.
Page 336 WMA file 500 items to 9999 for xxxx）and save in the folder of Playlist 100 items PRIVATE → DOCOMO → STILL. Then they Phonebook, Schedule, 9,999 items in total may be displayed. Received message, Unsent *2 Video/i-motion files are saved. Files with extension of 3GP or MP4 are treated as MP4 format.
Page 337 ･ A hexadecimal value of 001 to FFF in zzz of Operation Mail Contents PRLzzz and MOLzzz (In hexadecimal notation, Data attachment display one digit is represented with one of 16 (Extension) alphanumeric characters from 0 to 9 and A to Image in JPEG 2 Mbytes* 2.6 Mbytes...
Page 338 Operation Mail Contents Data Inserting/removing the microSD memory attachment display (Extension) card Music data in Not supported Unlimited MP4 format (3GP) ･ Turn the power off before inserting/removing the Melodies (MID, 2 Mbytes 100 Kbytes microSD memory card. SMF, MLD) ･...
Page 339 ･ Copying/moving may be unavailable depending on ToruCa. Exchanging the data between FOMA ･ When copying/moving ToruCa (details), it can terminal and the microSD memory card sometimes be saved as the state before obtaining ToruCa (details). You can copy/move data between FOMA terminal and the microSD memory card and back up FOMA Example When copying/moving images to the...
Page 340 1 or 4 When the phonebook data is copied, images saved in ● the phonebook data are also copied. However, in case of ■ Copying/moving selected items: displaying the phonebook data in the microSD memory a 2 or 5 Select data card, the images are not displayed.
Page 341 ･ When the phonebook is recovered by adding, a member of the PushTalk phonebook is Enter the terminal security code Select recovered without being registered in a group. A group name is not recovered. To cancel the backup: o ･ The sorting order of the phonebook group ･...
Page 342 Highlight the data Confirm data ･･ To switch between thumbnail and title displays Refer to the following pages for the operating (excluding the data in Melody, ToruCa and procedure of video/i-motion, melody, PDF data, Other): t ToruCa or data in Other. Video/i-motion ☛P320 ･...
Page 343 Setting i-motion in the standby display or as ring Setting Home folder tone or incoming image 初期フォルダ When the Home folder is not set, the ･ For the conditions of i-motion that can be set, see set as the home folder. “Setting video/i-motion to the standby display or phonebook data”.
Page 344 Deleting i-motion INFORMATION The images saved in the phonebook data are not ● Highlight an i-motion file on the data list in displayed. Returning to FOMA terminal allows to display. the folder The PushTalk phonebook entries included in the backup ●...
Page 345 If the used area is not “0 KB” with no data (including ● for Other movie (￥PRIVATE￥DOCOMO￥MMFILE) in the music data for Music Player) saved, format the microSD microSD memory card after renaming via PC, etc.
Page 346 Setting the microSD mode/MTP mode USB Mode Setting Before operating data in the microSD memory card in FOMA terminal from a PC, set the USB mode to either microSD mode or MTP mode. ･ In the micorSD mode, you can operate data in the USB connector microSD memory card from a PC.
Page 347 If you connect a PC and FOMA terminal, is displayed ● on the standby display. Press o and select Moving/copying data to the album display the screen for USB Mode Setting. Moving data to the album You can move data in the fixed folder to an album or Managing various data move it from album to album.
Page 348 Highlight an album INFORMATION ･ The following operations are available while the In the video/i-motion list, melody list or PDF data list, ● press m and select Move/Copy → Return to folder or video/i-motion album is played: o: Pause/replay %: Adjust volume Restore to folder →...
Page 349 Descriptions of displayed items INFORMATION In the image display screen, video/i-motion list, Chara- ● Display name： den list, Chara-den display screen, melody list, melody Title to be displayed on FOMA terminal (Up to 36 play screen, PDF data list, Machi-chara list, Machi-chara display screen or document list of Other, press m and characters regardless of one- or two-byte are available except for melody, and up to 50 one-or...
Page 350 File size： The file size of data Msg attach size： Deleting data File size suitable for attaching to i-mode Mail ･ Displayed only when file attachment is possible. ･ The data saved in the Preinstalled folder of My Playing time： Picture, i-motion, Melody or My Document or in the Playing time of data Mail attach melody folder of Melody cannot be...
Page 351 ･ Example Sorting data in My Picture Infrared communication and USB connection cannot be performed at the same time. Select a folder ･ Data prohibited from outputting from FOMA terminal cannot be sent/received. Note that the data whose file restriction is set to File restricted Press p with the same terminal and data in the Data Select each item to set...
Page 352 Data type Remarks ･ PDF data PDF data which is over 512 Sending data by infrared communication Kbytes* or downloaded partially Send Ir Data cannot be sent. ･ ToruCa* When sending one file, you can You can send data by selecting each item at a select whether to include details in a time or by sending all items of the specified ToruCa (details) file to send.
Page 353 In the schedule day view screen or list of notes, press ● m and select Ir/iC/microSD → Send Ir data. In the ToruCa list, press m and then select Send Ir data. Receiving data by infrared ● communication Receive Ir Data When you send ToruCa (details), a confirmation screen appears asking whether to send details as well.
Page 354 Overwrite： Receiving single data item Received data is overwritten and saved in FOMA terminal. After receiving is finished, ･ You cannot receive data that exceed 512 Kbytes. the receive method selection screen m6211 reappears without displaying INBOX. ･ Note that the original data in FOMA terminal The receive method selection screen appears.
Page 355 Mail data received from the device that can save mail by ● ：Video/i-motion the folder may be saved in the Message i- ppli folder. α ：Melody To check the saved mail data, select the Message i- ppli α ：PDF data folder in which the data is saved and press m1.
Page 356 Making full use of the iC communication function Remote control operation About the iC communication function Perform remote control operation with the infrared iC Communication data port of FOMA terminal pointed at the infrared receiver of the supported device used (operating Data is exchanged between FOMA terminals procedure differs depending on i- ppli).
Page 357 INFORMATION Sending single data item In the phonebook list, bookmark list, received mail list, ● sent mail list and unsent mail list, press m and select Example Sending a phonebook entry Send via Ir/iC or Send Ir/iC → Send all via iC. Search the phonebook Highlight the In the schedule calendar screen/day view screen or list...
Page 358 Show the standby display on the receiver ■ Single recording time/total recording time (D903i terminal) side and overlap the FeliCa marks of FOMA The estimated maximum time for a single terminals recording and the total time of recordings that can be saved in D903i are as shown below: Enter the authentication password File size restrictions...
Page 359 p or C <During recording/pause> The shutter sound is heard and recording is Indicates the rate of the recorded sound size to finished. A confirmation screen for the recorded the file size set in size restrictions (or the sound is displayed. allowable saving size when None is set).
Page 360 ■ Displaying the saved sounds in the list: Making full use of PDF viewer Menu 55 1 or 2 Displaying the PDF data ･ When displaying the sounds in the microSD PDF Viewer memory card in the list, select a folder. Press o or C View the PDF data saved in My Documents of Data Box in FOMA terminal.
Page 361 ( ：Switches the screen between the ：PDF data with UIM operation restriction standard and full-screen modes File restriction ･ When the full-screen mode is set, the (blue)：Without file restriction scroll bar, status and guide row (gray) ：With file restriction disappear. ･...
Page 362 Select the entry field for the character ：Search ：Last page string Enter the string (up to 16 one-byte ：Right 90 degrees ：Display link or 8 two-byte characters) ：Capture screen ･ To search for a completely matched word, ：Document information Keypads of 1 to 9 and 0 are assigned ･...
Page 363 Displaying i-mode bookmarks m421 on the PDF data display Utilizing bookmarks or marks screen Select the i-mode bookmark The registered bookmark position in the The page can be displayed quickly by selecting corresponding page is indicated with the same bookmarks or marks. There are 3 types of state (magnification, the direction of rotation) as bookmarks or marks as follows: when you registered.
Page 364 ■ Highlight a document Deleting all items: a m3 b Enter the terminal security code Originated ：Full Browser, Select Yes i-mode Mail ：Data transfer INFORMATION Multiple marks can be deleted also by pressing m and ● Document list selecting Bookmark/Mark → i-mode bkmark/Mark → Delete mark on the PDF data display screen.
Page 365 ■ Specifying magnification to enlarge/ reduce the display: m33 Enter magnification (10 to 1000%) ･ You cannot display the documentation at a smaller magnification than Fit Page. Rotating the display: m4 1 to ■ ･ The rotation of 90 degrees to right/left and 180 degrees is available.
Page 366 Music Playing/FM Radio Listening to music How to play music ..................364 ® Downloading Chaku-Uta Full from sites ............364 Transferring music data from PC to microSD memory card ......365 Playing music data on Music Player........Music Player Managing or using music data ..............369 Managing playlists ..................371 Listening to music on an audio device or car stereo..FM Transmitter...
Page 367 Enter a display name (up to 50 one- or two- Listening to music byte characters) How to play music ･ By default, the title name and artist name of ® Chaku-Uta Full are used as a display name in You can enjoy music on your FOMA terminal in the form of “title name-artist name”.
Page 368 WMA files in a playlist must not exceed destination as ￥DOCOMO￥MMFILE￥MUDxxx , where 400 if you want to transfer it. xxx is 001 to 999 (☛P333). When you update the ･...
Page 369 Artist/Album/Genre/Year： Menu 52 / Menu 6517 / Menu 9 You can choose and play any of the music Playing music data on Music Player data in the folders to which music data are Music Player sorted. The folder structure is as shown below.
Page 370 : Pop : In-a-train (DRM) ® Music data No./total number : Chaku-Uta Full , DoCoMo Volume : WMA file, Windows Media Digital Rights : FM Transmitter on ☛P372 Management (WMDRM) : WMA file without DRM Play progress bar and playing duration...
Page 371 INFORMATION Setting the playback method and effect Settings Note that Music Player consumes a lot of battery power ● ･ The setting of Surround is also reflected in the when being used. setting of Stereo Sound Effect. ☛P126 When the remaining battery power falls below Level 2, a ●...
Page 372 INFORMATION Managing or using music data The detail information can also be displayed by pressing ● m1 on the player screen. However, you cannot change the information. ® For Chaku-Uta Full , the availability information of DRM ● Viewing or changing detail information is not displayed.
Page 373 Press 1 Displaying and saving images in music data ･ When you select a music item in the microSD If music data contains an image for a jacket, the memory card, a confirmation screen appears standby display or lyrics, you can display the image asking whether to move it to FOMA terminal.
Page 374 Adding music data to a playlist Managing playlists Music data is registered in a playlist saved in your FOMA terminal. Create a playlist to add or edit music data. Highlight a music in the music data list ･ Maximum number of items that can be added m321 ☛P34 ･...
Page 375 Edit a playlist ■ Using FM Transmitter to output the sound Adding music data: m311 from i- ppli: α ■ a Set FM transmitter to ON in Settings for Select a folder Select music items To add selected items: m312 ppli ☛P265 α...
Page 376 ･ When you listen to the FM radio, you are not Setting FM Transmitter frequency charged with a communication fee. However, FM Transmitter Setting when you start FM Radio, acquire the NOW ･ The frequency selected must be different from PLAYING information, or search for music items, that of the FM radio station in your area.
Page 377 ■ Adjusting the volume: Highlight & Performing a variety of operations and settings from the menu ･スピー When the output destination is set to カー (Speaker) or when the stereo earphone You can perform a variety of operations and settings is not connected, the volume is set to 0 and from the menu on the FM Radio screen.
Page 378 Changing the wallpaper for the FM Radio screen Selecting or updating an area Area setting ･ You cannot set any image whose size exceeds Example When selecting an area & to highlight 240 x 400. on the menu screen Example When displaying images saved in My Select the area field Select an area...
Page 379 Setting the output destination and how to acquire the NOW PLAYING information Setting and HELP & to highlight on the menu screen Select each item to set ヘルプ (HELP)： HELP is displayed. イヤホン/スピーカー (Headset/speaker)： Select whether to output the sound through the headset or the speaker.
Page 380: Other Convenient Functions
Other Convenient Functions Multiaccess ................Multiaccess Multitask ..................Multitask Having an edit screen displayed when FOMA terminal is opened ....................Edit by Slide Turning power on/off automatically at the specified time ..................Auto Power ON/OFF Alerting with alarms after the specified time period has passed..Timer Ringing the alarm clock at the set time .........
Page 381: During A Voice Call
Example Sending i-mode Mail during a voice call b during a voice call Press 12 Multiaccess Multiaccess When transmission of i-mode Mail is completed, the talking screen returns. Multiaccess is a function that 3 functions (the To quit the mail composition: f in the mail ･...
Page 382: Turning Power On/Off Automatically At The Specified Time
Example Switching to the mail composition Inbox： screen during a voice call Displays the quick reply message b during a voice call Select Compose selection screen when opening FOMA terminal from the received mail list screen message or the received mail view screen. ･...
Page 383: Alerting With Alarms After The Specified Time Period Has Passed
INFORMATION Alarm indication while another function is Even if Auto Power OFF is set to ON, when the specified ● being used time arrives while FOMA terminal is in any mode except standby, the power is not turned off. The power is turned Function Alarm indication off after the running function completes each job.
Page 384 ･ If you select Day of week, select the Day/ INFORMATION Week to select the days of the week and If you delete the data specified as an alarm clock sound, press p. ● Terminal setting is assumed. Title： When you select Sync melody in light pattern, the Enter ●...
Page 385: Managing Schedules
Menu 71 When alarm clock does not ring at the set time Managing schedules ･ When All Lock or PIM Lock is activated, the alarm Scheduler clock does not ring. ･ When a Chara-den image is displayed at the set Save various schedules.
Page 386 ･ the date and the name of some national holidays and Reset is indicated in the guide row when a substitute holidays before the end of 2006 are displayed day of the week other than Sunday is as they are displayed after amendment to the law. selected or the selection of Sunday is canceled.
Page 387 & to switch to Reminder screen Select each item to set Select and set each item Alarm on time (Schedule alarm)： Set whether to sound an alarm. ･ If you select Yes and select i-motion, Melody, or Music, set the alarm sound. Setting music data ☛P121 ･...
Page 388 ● Schedules can be saved using the microSD memory card schedule start time. (☛P336). The DoCoMo keitai datalink and the FOMA USB When you set schedule with All day, the alarm operates ● cable (optional) can be used to send and save the data to at 00:00 on the set date.
Page 389 p (for over a second) p (for over a second) Select the date Select the date of the schedule of the schedule Pressing & in the ･ Highlight the schedule to copy day view screen switches dates. Highlight the date to paste the schedule to Day view screen Press m5 ■...
Page 390 On the calendar screen, press m81 ･ and then press 1 or 2. Deleting schedules On the schedule details screen, press a. ･･ The number of schedule items that can be deleted depends on the screen operated. Attaching the schedule data to the mail ○: Available ×: Unavailable Deleting type One day/...
Page 391: Registering Often-Used Functions
& to p (for over a second) on the standby Select the schedule to use display the member list screen display Select the date of the schedule Highlight the schedule to set Press Recorded members blinks when Secret The first phone number, Attribute is set for the mail address and URL of highlighted schedule.
Page 392 b Select the person to register ･ When the phonebook data with no image The custom menu is displayed. or the phonebook data that contains Flash ･ When Custom is set for Default MENU of Menu Setting, press m on the standby display. movie or video/i-motion is registered in the custom menu, a pre-registered icon is 1 to 4...
Page 393 Example Perform each operation When executing functions Rearranging menu items: m4 Display the custom menu Select the ■ Select the destination item Select Yes menu item Changing icons: m5 ■ Select an icon To restore the icon: m5 Function ･ Changing group names: m6 Person (Making a call or ■...
Page 394 ･ Say the keyword in Japanese to select the The voice command may not be recognized in a noisy environment. You should say to the FOMA function within 5 seconds terminal closer. Here is information on the keywords to select the ･...
Page 395: Recording The Voice And Image
performed as with the details screen for the phonebook: Enter the terminal security code Select Mail ☛P106 ･ Press p URL access ☛P106 ･ each item to set ･ Call Option (excluding making calls to Own Press & to switch ･...
Page 396 Hold down C for over a second during a call Recording starts. An indication of the allowable recording time Status icon ：Talking memo No icon：Standby voice memo Voice memo during a stay overseas* Talking voice memo during a international call Voice Memo during Video Memo during Phone number/Name (when registering...
Page 397 The last date and time when Total voice calls repair, change to new model or other handlings of FOMA was reset terminal. If the data should be erased, DoCoMo assumes Reset:day&time(VP)： no responsibility for the loss of any data. The last date and time when Total You can make calls by using Talking Voice Memo.
Page 398: Resetting The Call Cost Automatically
When FOMA terminal is turned off, the last call duration is ● Default Alert: OFF stored, but the last call cost is displayed as “＊＊＊＊＊＊ YEN”. m86822 The duration of receiving a call and ringing time are not ● be counted. The call duration and call cost is not counted for i-mode ●...
Page 399: Using Calculator
Only one number can be saved. Copying a written copy). Notes can be saved using the microSD memory card (☛P336). DoCoMo keitai datalink and the new number overwrites the saved number. FOMA USB cable (optional) can be used to send and The copied number is saved until FOMA save the data to the PC.
Page 400 To edit mail from the notepad list screen, highlight the ● Status icon note to use for a mail message, press m and select ：Completed Compose message. ：Uncompleted (2 days before the due date) ：Uncompleted (1 day before the due date or current day) Registering schedules from notes ：Uncompleted (after the due date)
Page 401 Select the string written in Date To format Select Meikyo Mobile Save it as schedule JpnDic Select the entry field enter “おさめる” The search result is displayed. Word entry field Search result • The “reading” of words are shown together with “words”.
Page 402 b Select a start position of the copying Hold down the switch for over a second range Select an end position until you hear two short beeps Press mo to select all the text. ･ A voice call will be made to the first registered Press c to cancel the start position ･...
Page 403: Reducing The Start-Up Time After Power-On
Select Control function field Hearing the ring alert only through the earphone To cancel: 2 ･ Alert Preference When connecting a flat type earphone/microphone set with switch, you can set to hear the ring alert only through the earphone. Default Headset only Select Phonebook No.
Page 404: Checking Current Settings Of Functions
Enter the terminal security code Select INFORMATION the item Even when you set to ON, it takes the normal time to ● start up in the following cases: ･ When the remaining battery level is 2 or lower ･ When the battery pack is replaced ･...
Page 405 ･ Data read by Bar Code Reader INFORMATION ･･･ ToruCa Notepad Call duration The following data will not be deleted. The default ● ･ Saved word/fixed phrase settings cannot be restored either. ･ Registered USSD ･ Osaifu-Keitai compatible i- ppli and related data α...
Page 406 Network Services Network services available using FOMA terminal ..Network Service Using Voice Mail Service ............Voice Mail Using Call Waiting Service ............. Call Waiting Using Call Forwarding Service ......... Call Forwarding Using Nuisance Call Blocking Service ....Nuisance Call Blocking Using Caller ID Request Service ........
Page 407: Using Voice Mail Service
Deactivate Voice Mail : m2 ･ For applications and inquiries, contact the : m3 Set Ring Time DoCoMo Information Center listed on the back of When a new message arrives, Play messages this manual. (with the number of messages) ･...
Page 408: Using Call Waiting Service
Item Operation procedure You can set an alert tone to sound Tone/Vibration Using Call Waiting Service when the caller left a new message, or message Call Waiting notification when the number of messages has increased at the time you perform Check Default Call Waiting Service notifies you of incoming calls Voice Mail alert:...
Page 409: Using Call Forwarding Service
Holding the current call and making another call Basic flow of Call Forwarding Service Enter the phone number during a call Step : Set the forwarding destination phone number ･ You can select the other party’s phone number from the received call history by pressing l, Step : Activate Call Forwarding Service from the redial data by pressing r, or from...
Page 410: Using Nuisance Call Blocking Service
m8742 Using Nuisance Call Blocking Service Perform the following operations Nuisance Call Blocking Item Operation procedure This service prevents you from receiving nuisance Activate Select Yes calls such as crank calls. After registering a phone Deactivate Select Yes number as nuisance caller, you can automatically Check setting Select Yes reject the call from the phone number and you can...
Page 411: Switching Languages For The Guidance
64K data communication are handled by Voice Mail Service. With Service Dialing Number, you can make a Call Forwarding: call to DoCoMo for Repairs or DoCoMo for Incoming calls received during a call or 64K data communication are General Inquiries.
Page 412: Setting Remote Control
10 two-byte characters). For Basic Additional No1: Number, the name set in Own Number DoCoMo mobile phones. 付加番号 1/Not is displayed. ･ You need to set Remote Control before using Voice...
Page 413: Registering New Network Services
When a new network service is added by When making a call from the redial data or received call ● DoCoMo, you can use the service by registering it history and the name corresponding to the multi-number in the menu.
Page 414 Flow of setup for data communication ............413 AT command ....................414 CD-ROM ......................414 DoCoMo keitai datalink ..................414 For data communication, see the PDF version of “Manual for Data Communication” in CD- ROM provided for details. To see the PDF version of “Manual for Data Communication”, Adobe Reader (version 6.0 or later is recommended) is required.
Page 415 Furthermore, operation will not be guaranteed in an environment other than that described on FOMA, such as DoCoMo’s “mopera U / above or by upgrading the OS and DoCoMo assumes no mopera” Internet connection service. These are responsibility for operation under such conditions.
Page 416 Internet immediately. For communication if base station traffic is heavy, or the details on charges, etc., visit the DoCoMo website. signal quality is poor. Setting the dialup connection (provider, etc.)
Page 417 Install the communication configuration file on a PC from the attached CD-ROM, before connecting FOMA terminal to a PC to perform packet or 64K “DoCoMo keitai datalink” is a software which edits data communication. the data of the phonebook or mail messages in your mobile phone after back-up to PC.
Page 418: Character Entry
Character Entry Entering characters ..................416 Entering characters using 5-touch Input Method ..................5-touch Input Method Registering fixed phrases ............Save Phrase Copying/cutting and pasting characters ......Copy Character Entering characters using codes ........ KUTEN Code Input Registering frequently used words .......... Save Word Using the downloaded dictionary ......
Page 419 Character entry screen Entering characters There are 2 types of character entry methods: “full-screen entry” and “in-line entry”. ･ Some entry fields may only be able to use either FOMA terminal has many functions such as character entry method. phonebook and mail that require entering ･...
Page 420 Changing input modes Entering characters using 5-touch Input Method 5-touch Input Method Example Switching from one-byte alphabet mode to two-byte alphabet mode Press n on the character entry screen Entering characters Kana/Kanji Conversion Example Entering “ 企業 ” in the phonebook Highlight Enter name field Input mode (current status) Input mode (the input mode...
Page 421 Press c for over a second to delete ･ ■ Fixing hiragana without conversion: Go to Step 4 after entering the hiragana. the character at the cursor position and all following characters. ■ Converting to katakana or alphanumeric: ･ Pressing m displays the list of conversion When the cursor is at the end of an entered character string options in katakana (one-byte/two-byte),...
Page 422 Entering characters using input prediction Resetting the predictive dictionary data function Resetting the predictive dictionary data which is The input prediction function is to display a list of registered as the predictive conversion options. predictive conversion options that match the initial m8623 part of the reading when characters are entered.
Page 423 A part of symbols can be converted by entering readings ● Entering pictograms and symbols in kana/kanji mode. p on the character entry screen Readings Symbols you can enter Greek characters ぎりしあ List of pictogram 1 is displayed. Latin characters ろしあ...
Page 424 Select <New phrase> Quoting Own Number data The fixed phrase edit screen appears. ･ The Own Number data is unable to be quoted on ･ To edit the registered fixed phrase: Select a the character entry screen of Own Number. fixed phrase to edit.
Page 425 Place the cursor at the location to paste on If a character string selected above contains blank ● spaces, it is processed as follows: the character entry screen Press ･ Blank spaces only: Cannot be registered as a fixed phrase ･...
Page 426 Select Word field Enter the word to Up to 5 words with the same reading can be registered. To ● register additional words, change the reading of new words. register (up to 24 one-byte or 12 two-byte When 200 words have already been registered, the list of ●...
Page 427 After pressing n, the input mode switches as ･ shown below by the following operations: The characters are fixed. ･ New characters can be added. Press o One-byte Hiragana/ One-byte alphabets kanji katakana Character entry is exited. ･ You can also perform the same operation by selecting m Exit.
Page 428 Using Your FOMA Terminal Overseas Overview of the WORLD WING international roaming service ....426 Services available overseas ................426 Check required before overseas usage ............427 Using Your FOMA Terminal Overseas ............429 Making calls from overseas ................429 Receiving calls ....................430 Setting the procedure for searching service providers ..................Network Search Mode Setting a service provider to be connected with priority ...
Page 429 (other than blue) must be inserted to your FOMA services overseas: terminal. ･･ Voice call Videophone* ･ The service area is limited to DoCoMo’s overseas ･･ i-mode Mail roaming area* . For details about the service ･ i-mode (including Full Browser) area and usage fees, visit DoCoMo’s international...
Page 430 You can also send and receive SMS to/from users Caller ID Request May not be set in some service Service areas. of overseas service providers other than DoCoMo. Public mode Can be set, but the service For the countries where the service is available and (Driving mode) cannot be used.
Page 431 ■ International access numbers for major countries When making inquires overseas When making inquires in your stay overseas, If your FOMA terminal is lost or stolen overseas or if there may be cases in which you cannot use you have to adjust the cumulative value of usage or those international phone IDs for universal cope with a failure encountered overseas, contact us numbers.
Page 432 “Mobile Phone User’s Guide [World Services]” or countries where the service is available and the “Mobile Phone User’s Guide [Network services]”. details of overseas service providers, visit DoCoMo’s international service website. ･ INFORMATION For a videophone call, the image of the other Details about the preparations and settings are found in ●...
Page 433 Select Country code field Select the Select Country code field Select +81 日本 country code of the destination country (Japan) Select Yes Select Yes ･ If you select 64K V.phone or 32K V.phone for the call type, press t and select Yes or No, use INFORMATION original.
Page 434 ･ As of October 2006, service providers other than NTT DoCoMo cannot be selected in Japan. Registering the service providers ･ In case of out of service area after returning to ･...
Page 435 Press 1 To cancel the setting: 2 ･ INFORMATION Even if ON is set, when the network of DoCoMo is used ● or you are outside the service area, the name of the network is not displayed. Using Your FOMA Terminal Overseas...
Page 436 Starting Roaming Guidance Rejecting incoming calls during roaming Roaming Guidance Call Barring in Roaming This function sets whether to play a guidance that This operation sets whether to reject all incoming notifies the other party of the current status of calls or incoming videophone calls.
Page 437 Using network services during roaming Overseas Services This function uses the part of network services such as Voice Mail Service and Call Forwarding Service from overseas. It is assumed that Remote Control has been set to Activate in advance. ･ The setting operation of Overseas Services cannot be performed outside the service area.
Page 438 Appendix/Data Interchange/ Troubleshooting Menu list ......................436 Data set by default ..................444 List of dial keys and character assignments (5-touch Input Method) ..447 List of input slots and character assignments (Slot Input Method) ..448 List of fixed phrases ..................448 List of face marks ...................450 List of symbols ....................452 List of pictograms ...................453 Combination of operations during Multiaccess ..........455...
Page 439: Menu List
P193 ー Not request c Go to location Keep in SMS center: 3 days P256 a Enter URL P192 ー SMSC: DoCoMo b URL history P192 ー Address: 81903101652 c Last visited URL P190 ー Type of Number: international d Screen memo...
Page 440 Certificate c Record voice P207 P393 ーー download memo c Certificate host DoCoMo d Voice memos P208 P393 ー d Skip password Yes P207 h Mail logs f Image & Effect Image, Animation: Display a Sent msg log P243 ー...
Page 441 System sound c Service a Keypad Keypad sound1 P298 ー settings sound P123 d Service host DoCoMo b Speed selector Selector sound1 P298 sound e Positioning Ring alert: Melody/パター c Shutter sound Shutter sound1 alert ン5(Pattern 5) d Movie camera...
Page 442 Menu item Default Page Menu item Default Page a Alerts & Sounds b Display b Adjust volume a Stand-by display a Call alert volume Level 4 b Clock format Style: use Style Theme b Mail/Msg alert setting Level 4 Time format: 24 hour vol.
Page 443 Menu item Default Page Menu item Default Page b Display c Security & Locks d Display light a Locks a Display light c IC card lock Normal use: 10 sec d IC card lock time AC adapter connected, Security code P289 i-mode session: setting...
Page 444 Menu item Default Page Menu item Default Page e V-phone/ToruCa/P-Talk e V-phone/ToruCa/P-Talk a Videophone c PushTalk (PT) b Videophone h P-Talk Ring alert: Melody/電話・メ alert ロディ A(Phone, melody A) speakerphone f Other Show image: Standard image a Clock Vibrate alert: OFF a Date &...
Page 445 ー b Check message ー setting b Message Only with Caller ID f Service numbers display setting a ドコモ故障問合せ d Caller ID (DoCoMo for ー a Caller ID notification Repairs) a Activate/ ー b ドコモ総合 Deactivate P408 案内・受付 b Check ー...
Page 446 Menu item Default Page Menu item Default Page g NW Services h Roaming/Call assist g Others a Intn’l roaming g Multi number e Call forwarding(Int.) a Set Multi a Activate ーー Number b Deactivate ー b Check c Call fwd ー...
Page 447: Data Set By Default
Data set by default ･ In case of deleting the following data, you can download from the i-mode site “My D-style”. ･････ Image for Deco-Mail picture Deco-mail pictogram Frame Chara-den Machi-chara How to access i-mode site “My D-style” (in Japanese only) To access “My D-style”, select iMenu→...
Page 448 Image for Deco-Mail picture The following images are stored in the Deco-mail picture folder of My Picture in Data Box. ･ The design of some images may be unclear when the background color is set to white. ･ Some of the following images may be different from those on the screen, because the background color is changed to make the design clear.
Page 449 Deco-mail pictogram ©Disney Frame ■ Size for standby (240 x 400) ■ QVGA size (240 x 320) ■ QCIF size (176 x 144) Appendix/Data Interchange/Troubleshooting...
Page 450: List Of Dial Keys And Character Assignments (5-Touch Input Method)
Chara-den Machi-chara ドコモダケシャチスケボーマン Dimo 女の子(Girl) (dokomodake) (Orca) (Skateboarder) © Disney © NTT DoCoMo/ Dentsu List of dial keys and character assignments (5-touch Input Method) Hiragana/kanji mode Katakana mode Alphabet mode Numeric mode (two-byte)* (one-byte/two-byte)* (one-byte/two-byte)* (one-byte/two-byte )* ―...
Page 451: List Of Input Slots And Character Assignments (Slot Input Method)
G H I g h i 4 たたちつてとっ 4 ﾀ Upper slot ﾅﾆﾇﾈﾉ 5 J K L j k l 5 ななにぬねの 5 ﾅ @docomo.ne.jp .com ﾞﾟﾞﾟﾞﾞﾟ定 .or.jp .go.jp .ne.jp ﾊ...
Page 452 今度みんなで○○へ行きましょう。いいところがありましたら、お知らせ下さい。 ○○しませんか？日時：○○、場所：○○。出欠をご連絡下さい。メッセージ下さい！！ ○○の時の写真だよ。 ■ Business (20 items) 本日の○○会議は、○○となりました。本日の○○訪問は、○○となりました。 ○○へ直行します。 ○○へ直帰します。電車遅延のため、○○遅れます。至急TEL下さい。予定変更！ TEL下さい。待ち合わせ変更！場所：○○、時間：○○ ○○頃まで、携帯電話の電源を切ります。振込口座：○○銀行○○支店、口座番号○○、名義人名○○です。 ○○の件、よろしくお願い致します。今日、一杯どうですか？連絡下さい。 FAX確認願います。次の指示を待て。変更します。延期します。中止します。 ○○での写真送ります。今わかりません。あとで連絡します。 ■ Answer (20 items) Thank you! Good! OKです。 NGです。いいよ。行きます。...
Page 453: List Of Face Marks
List of face marks Entering one of the following readings in hiragana/kanji mode allows to convert it. Entering “かお” or “かおもじ” also allows converting for face marks shown as ■ 挨拶・返事(Greetings/Answer) Face mark Readings Face mark Readings ぴーすうれしいばいあいさつちゅっにこっわらうばいばいあいさつ...
Page 454 Face mark Readings Face mark Readings こらっおこるぽかーんおどろきぷんぷんむかっおこるうーんおどろきめがてんおどろき ■ 泣く・悲しい(Cry/Sorrow) めがてんおどろき Face mark Readings めがてんおどろきあいたいたいいてーめがてんおどろきひぇーなくおおーびっくりおどろきうるうるなくぎくっおどろきしくしくなくがーんおどろきしくしくなくびくっかなしい ■ 疑問・焦り(Question/Impatient) がっくりかなしい Face mark Readings くすんなくぎくっあせあせりぐすんなくなぜぎもんがっくしかなしいぎくっあせあせりしょぼんかなしい...
Page 455: List Of Symbols
Face mark Readings Face mark Readings いいはぁためいきかんしゃありがとうためいきぴんぽーんうーんよしよしおいふふんじまんぷっよだれげっつふっにやりほへーどうぞほへーどうぞおちゃむしめがねきてかもんおいでじとっくちぶえじとったばこちちちしゃきーんどれどれせーふちらっいっぷくいたいいっぷくねてるねるうまいたべるねむいおねがい...
Page 456: List Of Pictograms
List of pictograms Entering one of the following readings in hiragana/kanji mode allows to convert it. ･ Entering “えもじ” also allows converting for Pictogram 1. ･ Entering “えもじに” also allows converting for Pictogram 2. ･ In case of sending i-mode Mail including pictograms to mobile phones by other companies (au/SoftBank/ TU-KA), they are converted to similar pictograms on the recipient’s phones automatically.
Page 457 Pictogram Readings Pictogram Readings Pictogram Readings きっさてんこーひーでんわゆうりょうえんおかねかっぷかふぇかねでんわけいたいでんわばーかくてるさけけいたいけーたいむりょうふりーびーるさけめーるあいでぃーふぁーすとふーどめもぱすわーどかぎろっくはんばーがーてれびりたーんえんたーぶてぃっくくつひーるげーむくりあびよういんはさみしーでぃーおんがくさーちむしめがねとこやくつすにーかーにゅーからおけまいくめがねいちじょうほうはたえいがふらっぐくるまいすゆうえんちもくばふりーだいやる...
Page 458: Combination Of Operations During Multiaccess
Pictogram Readings Pictogram Readings Pictogram Readings きけんけいこくびっくりめははっぱあせかおこぴーらいとしーもみじははっぱあせかおとれーどまーくさくらはなむっむかかおてぃーえむかたつむりどうぶつぼけかおれじすたーどとれーどひよことりどうぶつはーとかおまーくあーるぺんぎんどうぶつあっかんべーべーかおあいあぷりさかなどうぶつうぃんくかおあいあぷりうまどうぶつうれしいにこかおどるぶくろおかねかねぶたどうぶつがまんかおうでどけいとけいじかんてぃーしゃつしゃつねこどうぶつかおすなどけいとけいじーんずじーぱんずぼんえーんかなしいなくおにぎりおむすびかお...
Page 459 Processes that occur or Packet 64K data are performed communication Data transmission communication connecting to PC Current status Send Receive Send Receive Send Receive Send Receive During a voice call ○ * △ * ○ ○ ○ × × × During a videophone call ○...
Page 460: Combination Of Functions During Multitask
Combination of functions during Multitask Whether or not selections made in the New Task menu can be combined with the currently run or set function is described in the following table: ○ : can be selected × : cannot be selected New Task menu Mail i-mode...
Page 461 ○ : can be selected × : cannot be selected New Task menu i-mode Phonebook & Logs Data Box item a b c d e g a b c d e Browser settings Ans. machine/ Mail V. memo logs a b c d e a b c Function in progress...
Page 462 ○ : can be selected × : cannot be selected New Task menu Data Box LifeKit Stationery Adjust item volume f g h i a b c d e f a b c d a b c a b c Function in progress Phone call...
Page 463: Services Available For Foma Terminal
*2 FOMA In-Car Hands-Free Cable 01 is required to Note that calls to 110, 119 or 118 from FOMA terminal ● connect to FOMA D903i. cannot be located. Since the police or fire department authorities may call you to confirm, inform them that you are calling from a mobile phone, give your number and detailed information of your whereabouts.
Page 464 ● are not played, update the information of the microSD 簡易操作ガイド”(Simple User’s Manual for Motion memory card. ☛P342 Smoothy 3 of FOMA D903i) and HELP of Motion The detailed information of operating environment, ● Smoothy 3. installation and the usage of Motion Smoothy 3 are ･...
Page 465: Troubleshooting
Troubleshooting Troubleshooting Check if updating software is required first and perform Software Update if necessary. ☛P474 圏外 ● (outside service area) is indicated on the Power supply and charging display and you hear busy signals. Are you outside the service area or in an area with poor ●FOMA terminal cannot be turned on signal strength? ☛P43 (the terminal cannot be used).
Page 466 ●When there is an incoming call, an image not ●The day of the week appears in Japanese. ･ set appears. Is the day for Clock Display Format set to Japanese? ･ ☛P147 When video/i-motion containing sound and image is set ･...
Page 467: Example Of Error Messages
●When mail is received, the Enter key lights/ ●Voice calls or video-phone calls cannot be flashes in other lighting pattern and lighting received. ･ Have you set Call Barring in Roaming? ☛P433 color than those set for incoming mail. ･ When the incoming mail lighting pattern and color are ●The other party’s phone number is not set for multiple functions, the Enter key lights/flashes...
Page 468 ●Cannot save to a microSD. ●Connection failed. (562) ●Data in IC card is full. Unable Saving to phone memory. Failed to connect to the i-mode to download. Delete service? The still image/video with recorded Center. Please move to another Osaifu-Keitai compatible i- ppli α...
Page 469 ●Data in IC card is full. Unable ●Download failed. ●Exceeds maximum size. to update. Delete service? Communication was interrupted Unable to play. Osaifu-Keitai compatible i- ppli during reception. Please move to The attached file beyond the α cannot be updated unless Osaifu- another location with good radio maximum size cannot be played.
Page 470 ●Folder is full. ●Inbox is full. ●Insufficient memory. Unable Unable to receive Message R/F Unable to receive i-mode Mail to edit signature. Delete because the memory space is because there is insufficient memory signature. insufficient. Please read unread space in the Inbox. Please read When editing the signature is Message R/F, release protection of unread i-mode Mail, release i-mode...
Page 471 ●Invalid data. Unable to save. ●Location Parameter Error. ●Name too long. Saved with The downloaded data cannot be Cannot be displayed due to an error incomplete name. saved because the data is invalid. in the location information. When registering an item selected from the display of a site, etc.
Page 472 ●PUK blocked. This message may be displayed When using the camera during a Inquire at DoCoMo Shops. when the date and time have not call, it cannot be switched to video ●Receiving data exceeds been set or are incorrect. Set the date shooting and voice recording.
Page 473 ●Self Mode activated. ●SSL/TLS session cannot be ● This software contains an This prohibited operation is established. error. Unable to download. unavailable during Self Mode. SSL/TLS communication was Unable to download because the interrupted due to a SSL/TLS ppli data contains an error. α...
Page 474 ●Too much data was entered. ●Unable to connect during ●Unable to enter any more. Unable to transmit data because too outgoing call barring active. The number of characters exceeds many characters were entered in the Cannot connect because the outgoing the limit.
Page 475 ●Unable to use data type. ●Unsupported Content. ●Voice data damaged and Data in a file format incompatible Operation is unavailable because the unable to start. Please with FOMA terminal cannot be contents are not compatible with record voice data. copied or moved from a microSD FOMA terminal.
Page 476: Warranty And After-Sales Service
* If you have a PC (Windows 2000, XP), you can because of a lack of parts, etc. It may still be use DoCoMo keitai datalink and FOMA USB cable possible to repair your phone depending on (optional) to transfer and store the contents the nature of the required repair even after this registered in the phonebook, etc.
Page 477: Updating Software
When software update is required, the information of the sticker’s contents is impossible, repair or お知らせ will be posted on the DoCoMo website or servicing may be refused because confirmation (Notice) in iMenu. of whether or not the phone conforms to *1 Packet communication for software update is free relevant technical standards cannot be made.
Page 478 FOMA terminal (such as malfunction, Pressing o on the confirmation screen for ･ damage, or water leak). DoCoMo recommends backing sending terminal ID makes connection to the up necessary data. (Note that some data such as server and your private information concerning downloaded data may not be backed up.)
Page 479 Press o to cancel downloading. If ･ ■ When updating is not necessary: downloading is canceled halfway, the data If software updating downloaded up to then is deleted. has been found to be ･ After starting downloading, updating process is unnecessary as a executed without the operation of selecting the result of checking for...
Page 480 Automatically reloaded after the completion of rewriting After reload, wait while communicating again with the server. ･ Available date and time for reservation will be shown by the time of the server. Select preferred day and time ■ Selecting from the options displayed: Select preferred day and time Select Yes Press o...
Page 481 b oo b Select preferred day and time-slot Connection is made to the server and the The reservation is canceled and the menu options close to preferred day and time-slot is displayed. Pressing o on the confirmation screen ･ are displayed. ･...
Page 482 When a new pattern definition is distributed server (the server for the scan function managed by DoCoMo). DoCoMo does not use the sent information for purposes other than the scan function. Setting Virus Scan Function...
Page 483 ･ Select Yes twice When 6 or more problem elements have been detected, the names of the 6th and subsequent The pattern definition is updated. problem elements are omitted and the total count of the detected problem elements is displayed. Display of the scan result Warning level/ Handling method...
Page 484 Approx. 170 minutes SAR certification information During a videophone call: Approx. 100 minutes This model phone FOMA D903i meets the MIC’s * Type of battery Lithium ion battery technical regulation for exposure to radio waves. pack The technical regulation established permitted levels...
Page 485: Export Administration Regulations
Declaration of Conformity and its accessories, take the required procedure under your responsibility and at your expenses. The product “FOMA D903i” is declared to For detailed procedures, contact the Ministry of conform with the essential requirements of Economy,Trade and Industry.
Page 486 INDEX/Quick Reference Manual INDEX........................484 Quick Reference Manual .................490...
Page 487 INDEX Using INDEX Use INDEX if you want to search for a page from a function name displayed on the FOMA terminal screen or you have already known a function or service name. Example When you want to register a schedule Scheduler........
Page 488 Charge Alert ......Display Priority ......Position Location ....Charging ........Display sites by shortcut ..Positioning Alert ....Charging time ......DoCoMo keitai datalink .... Post-Position Task ....Chat mail Document Viewer..... Request Permit/Deny ... Broadcast address ....Deleting ........
Page 489 Inbox ......... Keypad Dial Lock ..... In-camera........Keypad Sound......Headset Key Control....In-car Handsfree ......Kisekae tool......Home URL ....... Incoming Call (Call Image) ..Downloading ......Host Selection......Incoming Msg.Attach....KUTEN Code Input....Certificate Host..... Indicator Light ......Info/Calendar Layout ....
Page 490 Register URL in Bookmark ... Format ........On-hold Tone ......Reply to Mail ......Inserting/removing ....Only View......... Save Mail ......Memory Status ..... Open Answer ......Search ........Scan Card......Operator Name Display ... Search from schedule ... Sync Data Info ...... Options and related devices ..
Page 491 New Entry (to FOMA terminal) Script Setting ................Secrecy Search ......New Entry (to PushTalk) ..Quality Alarm ......Secret Attribute New Entry (to UIM)....Quick Dial ......... Phonebook......Quick Dial ......Quick Mail ......... Schedule....... Reject/Accept Call ....Quick Record Message ....
Page 492 SSL communication Operation restriction function Videophone Alert ................Connecting......Change images (Videophone Standby display ......Register phonebook data ..Receiving) ......Standby Display Setting ... Security codes ......Videophone Dialing (Call Image) Clock Display Format.... Unblock PIN lock ................
Page 493 Quick Reference Manual How to use Quick Reference Manual Use Quick Reference Manual included in this manual as follows. Please refer to Quick Reference Manual (For Overseas Use) in case of using International Roaming (WORLD WING) overseas. Cut along the dotted line. ●...
Page 500: Mobile Phone Etiquette
Mobile phone etiquette When using your FOMA terminal, always be considerate of your environment and those around you. Turn the power off in the following situations ■ In prohibited areas Use of mobile phones in the following places is prohibited. You must turn off your FOMA terminal. ･...
Page 501 You will need your “DoCoMo ID/password” to access e-site from PC. ● If you do not have or you have forgotten your “network ID” or “DoCoMo ID/password”, contact the DoCoMo Information Center listed below. ● DoCoMo e-site may not be available depending upon the content of your subscription.
Page 502 ■ About Manual for Data Communication In this manual, the important items which are needed for data communication by FOMA D903i and the method of installing “communication configuration file (driver) for D903i” and “FOMA PC configuration software” are explained. ■ Operations for Windows In this manual, the contents correspond to Windows XP Service Pack 2.
Page 503 5 MB or more free disk space access points that support packet communication *1 USB port (conform to USB specification 1.1/2.0) is on FOMA, such as DoCoMo’s “mopera U/mopera” required. Internet connection service. These are offered by *2 The operation from OS upgrading is not covered by the the best-effort connection which allows warranty.
Page 504 You can make a connection with Internet satisfied, you may not be able to perform data immediately. communication if base station traffic is heavy, or the For details such as on charges, visit the DoCoMo signal quality is poor. website. Setting the dialup connection (provider, etc.)
Page 505 Before installation/uninstallation Flow of setup for data communication ･ Installing and uninstalling the communication configuration file or the FOMA PC configuration software can only be performed by a user with The setup work needed to connect FOMA administrator privileges. Attempts made by other terminal to a PC to perform packet or 64K data users will result in errors.
Page 506 FOMA terminal. ･ Check that the Enter key lights in red. * For the FOMA D903i CD-ROM screen, the recommended operating environment is Microsoft Internet Explorer 6.0 or later. In case your PC does not satisfy the recommended environment...
Page 507 (Control panel), ナンス (Performance and maintenance) システム (System) INFORMATION システムのプロパティ ● When the installation fails or FOMA D903i USB is not (System properties) screen appears. プログラムの追加と削除 displayed on the screen of ■ For Windows 2000: insert the attached CD-ROM into the PC and on the...
Page 508 ■ W-TCP setup Optimize the settings in the PC before performing * For the FOMA D903i CD-ROM screen, the FOMA packet communication. Optimization of the recommended operating environment is communication settings using W-TCP setup is Microsoft Internet Explorer 6.0 or later.
Page 509 タスクトレイに常駐する Check that Setting packet communication by easy setup 次へ (Reside in task tray) is selected and click Before setup, make sure that FOMA terminal and W-TCP 設定 (W-TCP setup) resides in the task tray the PC are properly connected. ☛P3 after the setup.
Page 510 mopera U 『』への接続 Select (mopera U mopera 『』への接続 connection) or 次へ (mopera connection) Click ･ When mopera U is selected, a confirmation message to agreement appears. If the はい subscription is completed, click 次へ Set each item Click ･...
Page 511 完了 Check the settings and click ■ Advanced setting (TCP/IP setting): 詳細情報の設定 Click (Set detail info) to Click OK display the IP アドレスネー (IP address) and The PC must be rebooted for the changes to take ムサーバー (Name server) setting screens. はい...
Page 512 “mopera”) in Step 3. Set any connection name and each item 次へ Click ･ The following one-byte characters cannot be entered: ￥ / : ＊ ? ! <> ｜” Check that FOMA D903i is set for ･モデムの選択 (Modem selection). Next...
Page 513 Step 3 for the dialup connection. Set each item Click 次へ･ Register the following items: ･接続名 : Optional ･モデムの選択 : FOMA D903i ･電話番号 (Phone number) 次へ Set each item Click : Enter based on information ･ユーザー名パスワード...
Page 514 ･すべてのユーザー使用可能スタート If you select ■ Starting from the menu of ユーザーの選択 , all users that are allowed to Windows XP: a Click スタートすべてのプログラム, アク logon to Windows can access the connection. セサリ通信 (Accessories), ネットワーク接続 (Communication), and (Network connection) b Double-click the dialup connection スタート...
Page 515 ■ Starting from the task tray: Click INFORMATION ● The transmission speed displayed on your PC may Perform the following operations: differ from actual speed. ■ When the system has not been optimized: ● Data transmission is available only with FOMA The following screen is displayed.
Page 516 Reboot the PC following the instruction Canceling optimization shown on the screen ･ Cancel optimization in case of executing 64K data ･ The contents you have set is available after communication or when communicating via other restarting. than FOMA terminal. For Windows 2000 For Windows XP Start FOMA PC...
Page 517 Make the dialup connection (APN) settings ■ Creating dialup connections: a Select an added or edited dialup ダイヤルアッ connection (APN) Click プ作成 (Create dialup connection) The FOMA 端末設定書き込み (Write setting to FOMA terminal) screen appears. b Click Click OK はいパケット通信用ダイヤルアップの作...
Page 518 (This setting is not required for 64K data b Double-click アプリケーションの追加と communication, and for packet communication via mopera U / mopera.) 削除 Select NTT DoCoMo FOMA PC 設定ソフト (NTT DoCoMo FOMA PC configuration Set to show/hide caller ID ☛P18 (Set as required.) 変更と削除...
Page 519 ■ Checking dialup connection (APN) settings: AT + CGDCONT? Enter a fictional phone number (such as 0) for ■ When nothing is displayed even if AT , select FOMA D903i from 電話番号接続 command is entered: ATE1 Click OK 方法...
Page 520 Check that OK is displayed and click ファ Dialup connection (APN) and イルハイパーターミナルの終了 registration number (cid) ･現在、接続されています。切断してもよ After The dialup connection (APN) for packet ろしいですか？はい appears, click communication can be set for registration numbers “XXX” ･と名前付けされた接続を保存しますか between cid1 to 10 in FOMA terminal.
Page 521 ･ If there is only one modem installed, the device selection screen is not displayed. Go to Step 8. FOMA D903i (COMx)* Select モデムー次 (Modem: FOMA D903i (COMx)) Click へ次へ Set each item Click FOMA D903i (COMx)* ･...
Page 522 Check the setting of each item in the Click (General) tab ) all items and click OK Uncheck ( ･ When multiple modems are installed to the PC, The dialup connection properties screen FOMA D903i (COMx)* モデムー接続 select reappears. 方法･ FOMA D903i (COMx)* モデム−...
Page 523 Internet) is set to FOMA D903i and click 次へ The Internet account connection information screen appears. ･ If FOMA D903i is not set, set FOMA D903i. Enter the number of dialup connection 電話番号詳細設定 (one-byte) in Click (Detailed settings) ･...
Page 524 全般 Enter any connection name in Check the setting of each item in the 次へ Click ･ If multiple modems are installed in the PC, FOMA D903i (COMx)* モデムー接続 select の方法 (Connection procedure). 電話 When the modem is changed, all items in 番号...
Page 525 ) and click OK Uncheck all items ( Disconnecting communication The dialup connection properties screen reappears. Just exiting the browser may not disconnect the connection. To ensure disconnection, perform the following operation: Click in the task tray 切断 Click Click OK Connecting through dial-up The method of dialup connection for packet communication/64K data communication is explained...
Page 526 Switching between the online data mode and AT command online command mode To switch FOMA terminal from the online data mode to online command mode, you can use either of the AT commands are commands for setting FOMA following procedures: terminal functions from a PC.
Page 527: At Command List
･ AT commands that can be used via the FOMA D903i Modem Port are described in this list. : Returns the setting to default with the AT & F command. : Stores the command setting into FOMA terminal with the AT&W command and restores it with the ATZ command.
Page 528 Command Description & Parameter AT ＊ DGPIR = n Specifies whether to notify the caller ID for packet communication. This specification is effective both for incoming and outgoing calls. n = 0: The APN is used as it is when a packet communication is established. (default) n = 1: Adds “184”...
Page 529 Enter Display None Test None ATI [n] Shows the identification code. n = 0:Shows “NTT DoCoMo”. (when parameter omitted) n = 1:Shows model name of FOMA terminal. n = 2:Shows the version of FOMA terminal. ex. Enter ATI0 Display None Test None Switches the mode from the online command to the online data.
Page 530 Command Description & Parameter ATX [n] Specifies whether to detect busy tone and dial tone, and whether to display the communication speed. n = 0: Busy tone not detected, dial tone not detected, communication speed not displayed. (when parameter omitted) n = 1: Busy tone not detected, dial tone not detected, communication speed displayed.
Page 531 Operation performed when parameter is omitted Disconnection reason list AT + CGDCONT = ■ Packet communication Clears all <cid> settings. However, entry for “<cid> = 1” and “<cid> = 3” is restored to the Value Reason default setting. APN is not present or is incorrect. AT + CGDCONT = <cid>...
Page 532 Operation performed when parameter is omitted Result codes AT + CGEQMIN = Clears all <cid> settings. ･ When the ATV [n] command (☛P27) is set to AT + CGEQMIN = <cid> “n=1”, the result code is displayed in the text Returns the specified <cid>...
Page 533 ■ Communication protocol result code No. Text display Meaning PPPoverUD Connected via 64K data communication AV32K AV (videophone) connected via [32K] AV64K AV (videophone) connected via [64K] PACKET Connected with packet communication ■ Display example of result codes When “ATX 0” is set Regardless of the settings of the AT￥V command (☛P28), only CONNECT is displayed upon completion of connection.
Page 534: Kuten Code List
Kuten Code List ･ Some of the following may look different from the displayed ones. 1st to 3rd 1st to 3rd 1st to 3rd 4th digit figure of the JIS Kanji code 4th digit figure of the JIS Kanji code 4th digit figure of the JIS Kanji code digit digit...
Page 535 1st to 3rd 1st to 3rd 1st to 3rd 4th digit figure of the JIS Kanji code 4th digit figure of the JIS Kanji code 4th digit figure of the JIS Kanji code digit digit digit Next...
Page 536 1st to 3rd 1st to 3rd 1st to 3rd 4th digit figure of the JIS Kanji code 4th digit figure of the JIS Kanji code 4th digit figure of the JIS Kanji code digit digit digit Next...

Docomo FOMA D903i Manual

Danger

Before Using D903I

Pushtalk

Phonebook

I-Mode/I-Motion/I-Channel

I- Α Ppli

Osaifu-Keitai/Toruca

Gps Function

Network Services

Appendix/Data Interchange/ Troubleshooting

Quick Links

Chapters

Need help?

Questions and answers

Related Manuals for Docomo FOMA D903i

Summary of Contents for Docomo FOMA D903i

Table of Contents