Docomo FOMA D902i Manual

Table of Contents

Quick Links

Download this manual

Manual

for

'05.10

Quick Search/

Contents/Cautions

Before Using D902i

Making/

Receiving Calls

Making/Receiving

Video-phone Calls

PushTalk

Phonebook

Sounds/Displays/Lights

Settings

Safety settings

Camera

i-mode/i-motion

Mail

ppli

i-channel

Mobile Wallet/ToruCa

Displaying/Editing/

Managing Data

Other Convenient Functions

Network Services

Data Communication

Character Entry

Appendix/Data Interchange/

Troubleshooting

INDEX/

Quick Reference Manual

Table of Contents

Chapters

Table of Contents

Need help?

Do you have a question about the FOMA D902i and is the answer not in the manual?

Questions and answers

Summary of Contents for Docomo FOMA D902i

Page 1 Manual Quick Search/ Contents/Cautions Before Using D902i ’05.10 Making/ Receiving Calls Making/Receiving Video-phone Calls PushTalk Phonebook Sounds/Displays/Lights Settings Safety settings Camera i-mode/i-motion Mail α ppli i-channel Mobile Wallet/ToruCa Displaying/Editing/ Managing Data Other Convenient Functions Network Services Data Communication Character Entry Appendix/Data Interchange/ Troubleshooting INDEX/...
Page 2: Before Using Your Foma Terminal
If you are unclear as to any point indicated in any of these manuals, contact the DoCoMo Information Center that is listed on the back of this manual. Your FOMA D902i is a valuable asset. Handle it with care and it will be your trusted partner for years to come.
Page 3: How To Use And Refer To This Manual
How to use and refer to this manual You can look for functions or operation procedures that you want to know using various searching ways. Refer to INDEX P488 Search for a function name or service name. Use Quick Search Search for frequently-used or useful functions using easy-to-understand words.
Page 4: Using Quick Search
How to use and refer to this manual Shown below is an example when you search for the page where “Vibrator Setting” is described. Searching on INDEX Use INDEX if you have already known a function or service name. Vibrator Setting ......ppli........
Page 5: Default Setting
Title & Function name: Using vibrator to signal incoming calls and alarms Vibrator Setting Function names are The reception of call, PushTalk call, mail, Message R/F, etc. or the schedule alarm notice is listed on INDEX. indicated by vibration. Functional overview ･...
Page 6: Quick Search
Quick Search Use this Quick Search to look for the frequently-used or convenient functions directly. Useful • Notify/not notify your phone number....46 Caller ID Notification functions for • Talk facing the phone screen ......79 Speakerphone function phone calls •...
Page 7 Advanced functions for • Send your original Deco-mail ......235 Deco-mail mail • Send images with mail........241 Attachment • Sort and save mail automatically....... 269 Sort Criteria Advanced • Change the size of image to shoot ....180 Image size functions for •...
Page 8: Table Of Contents
Using a FOMA terminal for the first time..Inside front cover Contents How to use and refer to this manual ........1 Quick Search............... 4 Features of FOMA D902i ............ 8 Making full use of D902i ............ 10 SAFETY PRECAUTIONS (Always follow these directions) ..12 Handling instructions ............19 About intellectual property rights ........
Page 9 C o n t e n t s Mail Composing and sending i-mode Mail Deco-mail Attachment Saving i-mode Mail Receiving i-mode Mail Check i-mode Message Display/Save Image i-motion Mail Play/Save Melody Mail Setting Chat Mail Composing and sending SMS etc. i-αppli Downloading Starting i- ppli i-...
Page 10: Features Of Foma D902I
Features of FOMA D902i FOMA is the name of a set of services provided by DoCoMo based on W-CDMA, which is recognized as one of the systems compliant to the global standard for third generation mobile communications (IMT-2000). It’s amazing because it’s i-mode! i-mode is an online service used with i-mode terminals.
Page 11: Useful Functions
FOMA terminal while a The time in FOMA terminal is automatically received mail or schedule is displayed. ☛P368 corrected by the information from DoCoMo network. Also you can set the time on your phone Built-in camera ahead or back, if you want.
Page 12: Making Full Use Of D902I
Making full use of D902i A variety of functions of D902i visual communications are explained here. Telling feelings by Chara-den Your screen The other party’s screen When talking by video-phone, a character can be displayed on the other party’s screen instead of your self image.
Page 13 ToruCa ToruCa can be obtained from the reader/writer or sites and can be easily exchanged using mail, infrared rays or the miniSD memory card. The obtained ToruCa is saved in ToruCa in Tools menu. ☛P314 詳細 Obtain ToruCa by Select obtained ToruCa from the ToruCa list. Press (Details) button to holding up Mobile Wallet view more detailed information.
Page 14: Safety Precautions (Always Follow These Directions)
SAFETY PRECAUTIONS (Always follow these directions) ● Read the following SAFETY PRECAUTIONS to ensure that the phone is used correctly. Also, store this manual in a convenient location for future reference. ● It is essential that these precautions be observed to prevent injury to the user and third parties as well as damage to property.
Page 15: Handling The Foma Terminal, Battery Pack, Adapter (And Charger) And The Uim (General Information)
FOMA DC adapter: 01 ･ For additional items related to the compatible products, contact the nearest DoCoMo Shop. Do not disassemble or remodel the components. Also, do not solder them. Attempting to do so will lead to an accident, such as a fire, injury, or electrical shock and damage the equipment.
Page 16: Handling The Foma Terminal
CAUTION When a child uses the FOMA Do not place the components terminal, first be sure an on an unstable or tilted surface. experienced adult teaches Doing so could cause the equipment to slide off, possibly causing personal proper usage methods and injury or damaging the equipment.
Page 17: Handling The Battery Pack
Do not aim the infrared port at Do not use the FOMA terminal eyes and attempt to transmit. while driving. Eyes could be affected. Aiming at other From November 1, 2004, using mobile infrared devices and transmitting could phones while driving is set as the object cause other devices to malfunction.
Page 18 Use adhesive tape to cover the terminal of battery pack when it is no longer used and bring it to a DoCoMo Shop after the insulation. Alternatively, you can also dispose of the battery pack in accordance with local regulations.
Page 19: Handling Optional Devices (Ac Adapter/Dc Adapter/Desktop Holder)
Handling optional devices (AC adapter/DC adapter/desktop holder) WARNING Use care not to short circuit the Do not touch the adapter (and recharging terminal when the charger) cord or wall outlet with adapter (and charger) is connected wet hands. to a wall outlet or cigarette lighter Doing so could cause electric shock.
Page 20: Handling The Uim (Foma Card)
CAUTION Disconnect the power plug before Do not yank on the adapter (and beginning any maintenance. charger) cord or power cord when Failure to do so could cause electric disconnecting the adapter (and shock. charger) from the wall outlet. Doing so could damage the cord, Do not place heavy objects on resulting in electric shock or fire.
Page 21: Handling Instructions
NTT DoCoMo cannot be held responsible in any way for the loss of stored data. ●Do not put the FOMA terminal in your back pocket and sit on it. Avoid putting the phone in the bottom of a bag, etc.
Page 22 ●It is recommended that users maintain data stored on the UIM in some other form. If the data should be erased, NTT DoCoMo assumes no responsibility for the loss of any data. ●The UIMs that are no longer used should be returned to a DoCoMo Shop for environmental protection.
Page 23: About Intellectual Property Rights
DX”, “i-channel”, “Dual Network”, “FirstPass”, “sigmarion”, “Security Scan”, “musea”, “visualnet”, “Public mode”, “ToruCa”, “Push Talk”, “PushTalkPlus” and FOMA, i-mode, Mobile Wallet and PushTalk logos are trademarks or registered trademarks of NTT DoCoMo. ･ “ キャッチホン (Call Waiting)” is a registered trademark of Nippon Telegraph and Telephone Corporation.
Page 24 ･ Contains Adobe Reader of Adobe Systems Incorporated. Copyright© 2005 Adobe Systems Incorporated. All rights reserved. Patents pending. Adobe, the Adobe logo and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated. Adobe and Reader are trademarks or registered trademarks of Adobe Systems Incorporated in the US and other countries.
Page 25: Basic Package And Optional Accessories
・It may describe like Windows XP, 2000, Me, 98 in parallel. ・Windows 98 and Windows 98SE are described as Windows 98 in all. Basic package and optional accessories Basic package FOMA D902i Instruction manual CD-ROM for FOMA (including the written...
Page 26 MEMO...
Page 27 Before Using D902i Names and functions of parts .................26 Reading the display ..................28 Selecting the menu....................30 Number of saved, registered and protected items in FOMA terminal ..36 Using the UIM (FOMA card) ................36 Attaching/removing the battery pack .............39 Charging the battery of FOMA terminal ............40 Checking the remaining battery level ........
Page 28: Names And Functions Of Parts
Names and functions of parts Size (mm)：109 (H) x 50 (W) x 19.5 (D) (when closed) Weight (g) ： Approx. 116 (with battery pack) Call indicator Dial keys* Lights or flashes when a call or mail is received, Used to enter phone numbers and text and to FOMA terminal is opened/closed, shooting with select menu items.
Page 29 r Redial/ → (next) key C Answer Machine/shutter key Use this key to display the redial data, switch Use this key to display Answer Machine/Voice between pages, move the cursor rightward, set/ Memo menu, start Quick Record Message, activate Camera and shoot images, stop ring tone/alarm cancel IC Card Lock etc.
Page 30: Reading The Display
Reading the display The description of icons displayed at the top or the bottom of the display are shown below: ･ When you use the i-channel service, if Show ticker is set to Yes in Ticker Setting, the i-channel received information is displayed as ticker on the stand-by display. ☛P309 Unreceived i-mode Mail or Message R/F in the Center ☛P250, P217 Unread i-mode Mail or SMS storage...
Page 31 PIM Lock is set ☛P157 Connecting to the external devices by Keypad Dial Lock is set ☛P158 the FOMA USB connection cable (optional) ☛P92, P407 Alarm Clock is set ☛P369 Schedule alarm is set ☛P372 Effective Easy Selector Plus keys in Focus Alarm Clock and schedule alarm are set Mode ☛P35 simultaneously...
Page 32: Selecting The Menu
(dark blue/gray) (dark blue/gray) : Update Definition activated/ : In the miniSD mode : Setting/holding each function version display (communication is possible)/ : Software Update activated : Setting each network service (USB cable unconnected/no : Software Update notified miniSD memory card inserted) Reading the list screen Example Color scheme screen...
Page 33 Switching to the simple menu The normal menu is displayed. When the custom menu is displayed: p ･ Press a The simple menu is displayed. Switching to the normal menu: ma on the stand-by display ■ To switch the custom menu: m p on the stand-by display ･...
Page 34 When the simple menu is set ● During calling or talking, you can see how to adjust the volume of caller’s voice. ● In stand-by display, enter the phonebook No. (1 to 9) to see the registered names and telephone numbers.
Page 35 Selecting menu items with Easy Selector Plus ･ The menu selecting method in the tile icon display is the same as the method of the animation display (Type1). Example Executing Volume from the normal menu (Type1 of animation display) ･ Select the desired menu item when other than displaying animations to display the description of the item’s function.
Page 36 Selecting functions from the submenu When MENU is displayed at the upper left of the guide row, you can use the submenu to perform various operations. Example Displaying the Redial submenu m in the redial list Item that has been highlighted Lower-level menu exists Show that a submenu exists % to highlight a submenu item...
Page 37 Press o Selecting an item from the check box % to highlight a check box The check box changes from , and is selected. ･ Select the selected item ( ) to cancel the selection ( Depending on the function, select/cancel all items by pressing m. ･...
Page 38: Number Of Saved, Registered And Protected Items In Foma Terminal
Number of saved, registered and protected items in FOMA terminal Maximum number of Maximum number Maximum number of Maximum number Type saved/registered of protected Type saved/registered of protected items items items items Mail Received mail* 1000 ppli* α Sent mail* Image* 1000 −...
Page 39 Inserting the UIM aSlide the locked section in the direction of the arrow. bInsert the UIM into the slot in the Locked section direction shown in the figure with the IC side of the UIM facing down. Cut corner Cut corner cPush the UIM fully until it is locked after the locked section is returned to its original position.
Page 40 Font type, Keep in SMS center, SMSC, Address and Type of Number of SMS Setting ･･･ DoCoMo Cert, User Certificate of Certificate Setting My phone number of Own number Select Language ･ The PIN1/PIN2 cord of the UIM, PIN1 Cord ON/OFF ･...
Page 41: Attaching/Removing The Battery Pack
DoCoMo Information Center WORLD WING WORLD WING is the DoCoMo FOMA international roaming service. By taking out the UIM (green) from the FOMA terminal you normally use and inserting it into FOMA terminal corresponding to the service or an overseas mobile phone (W-CDMA or GSM handset), you can make/receive calls usually in foreign countries with your own mobile phone number.
Page 42: Charging The Battery Of Foma Terminal
FOMA terminal uses a lithium ion battery containing valuable materials that should be recycled. To protect the environment, return used batteries to an NTT DoCoMo service counter, NTT DoCoMo agent or recycling center. ● Please take the following precautions when recycling batteries: ･...
Page 43 ･ Continuous stand-by time (while moving) is the average operation time of FOMA terminal that is standing still, moving and outside the service area when it is closed and able to receive signals normally. ･ Alternatively, if you perform data communication or Multiaccess, use Camera or play video/i-motion (including music data), the call (communication)/stand-by time will also be reduced.
Page 44 ■ Charging the battery with the AC adapter alone aUnfold the power plug from the AC 100 V AC outlet adapter and plug it into a 100V AC Power plug Call indicator outlet. bOpen the external connection terminal cap of FOMA terminal. cInsert the AC adapter connector in firmly until it clicks.
Page 45: Checking The Remaining Battery Level
Call indicator Cigarette lighter plug Connector Cigarette lighter socket Release button DC adapter INFORMATION ● If you charge FOMA terminal with the car engine off, the car battery may be discharged. Charge the battery when the car engine is running. ●...
Page 46: Turning The Power On/Off
Setting the low battery alert not to sound Low Battery Alert Default ON m815 Press 2 To set the alert: 1 ･ INFORMATION ● When the battery almost runs down during a call, even if OFF is set, the low battery alert sounds from the earpiece.
Page 47: Switching To English Display
Setting the date and time Date and Time Setting The time setting can be performed in two ways: obtaining the time information from DoCoMo network to adjust the time setting of your FOMA terminal, or manually entering the current time to your terminal.
Page 48: Notifying Your Phone Number To The Other Party
：Set the date and time. Date, Time ･ Enter the year by the last 2 digits of the year. From January 1, 2000 to December 31, 2050 can be set. ･ Enter the time in the 24-hour clock (00h00m - 23h59m). ･...
Page 49: Checking Your Own Phone Number
･ Caller ID Notification cannot be set in a location outside the service area. Set it in a location with good radio wave condition. ･ For details, see “Network Services User’s Guide”. m951 To check the current setting: m952 ･ Select Yes Enter the network security code ･...
Page 50 MEMO...
Page 51 Making/Receiving Calls Making calls Making calls ......................50 Switching from a voice call to a video-phone call..........53 Calling back previously called numbers ........... Redial Setting whether to send your phone number for each call ... 186/184 Call Making calls by setting the conditions ............56 Using international calls ............
Page 52: Making Calls
Making calls Making calls The procedures for making voice calls and the common operations for voice calls and video- phone calls are explained here. ･ Do not cover the built-in antenna with your hands during a call. Enter a phone number Calling general subscriber Always include the area code even when phone...
Page 53: During A Call
Putting calls on hold while talking On-hold Putting the call on hold while talking allows you to talk without the caller hearing your voice. ･ Callers are charged for the time spent on hold. o during a call The call is put on hold and a guidance (on- Flashes hold tone) is played.
Page 54 Operation during voice calls The following operations can be performed from the submenu: Submenu item Description Page a Switch to V-phone Switches from a voice call to a video-phone call. b Received calls Displays received calls. c Redial Displays redials. d Set time Sets the date and time.
Page 55 It takes about 5 seconds to switch. In addition, it may take time to switch depending on radio wave conditions. ● Depending on radio wave conditions, a voice call may not be switched to a video-phone call or may be disconnected. Next From January 2001, the DoCoMo display beeper name has changed to “QUICKCAST”.
Page 56 ● The call is not charged while Modifying is displayed. Switching from a video-phone call to a voice call ☛P81 ● ● A second call received while switching calls is rejected. ● The speakerphone function is turned off every time a voice call and video-phone call are switched. ●...
Page 57 b 1 or 2 Register the name or address ☛P107, P110 To add to an existing phonebook entry: 1 or 2 Select an entry ☛P118 ･ ■ Registering an entry in the PushTalk phonebook: Highlight a redial Select Yes ･ The party cannot be registered if not registered in the FOMA terminal phonebook.
Page 58 Setting whether to send your phone number for each call 186/184 Call Set whether to make your phone number (caller ID) to be displayed on the other party’s terminal when you make a call. ･ The caller ID is your important information. Carefully consider whether to send your caller ID. ･...
Page 59 (without prefix “010”) no longer be used. ･ Contact “General Inquiries” on the back of this manual for details. ・To use international call services other than the DoCoMo service, contact each carrier for details. ･ Some billing plans are not available.
Page 60 Using “WORLD CALL” by simplified dialing Auto Assist Setting When Auto is set for this setting, entering “+” followed by a country code and phone number makes an international call easily by automatically appending “009130010” for international call. ･ If “+” is prefixed to dial followed by the country code of Japan “81”, “009130010” for international call is not appended even when Auto is set for this setting.
Page 61 Making a call by specifying a sub-address Sub Address Specify a sub-address to call a specific phone or communication device. ･ This setting is also used to select the contents in a video delivery service, “V-Live”. Default ON m8684 Press 1 To cancel the setting: 2 ･...
Page 62: Receiving Calls
Talking without using hands in a car In-car Handsfree You can make and receive voice calls from a handsfree compatible device by connecting FOMA terminal via USB to such device as the In-Car Hands-Free Kit 01 (optional) or car navigation system. ･...
Page 63 Display information The caller’s phone number, name, image or video/i-motion will be displayed on the screen according to the dialing condition of the caller and the FOMA terminal settings. The name or phone number can be set not to be displayed. ☛P141 ■...
Page 64 When you hear beeps (call waiting ring tone) while talking If you subscribe to Voice Mail, Call Waiting or Call Forwarding Service, you will hear beeps (call waiting ring tone) when you receive another incoming call while talking and the following operations can be performed: Service Operation Page...
Page 65 Enabling use of dial keys to answer a call Any Key Answer Allows you to answer a call by pressing 0 to 9, ( or # other than n. ･ This function is available for voice calls and PushTalk calls. However, it is unavailable when receiving a call while talking.
Page 66 ● When you close FOMA terminal during a call using a flat type earphone/microphone set with switch (optional) or other handsfree compatible devices (available in market) connected, the call continues regardless of this function’s setting if the settings is made to play sounds from the connected device. Even if you remove the flat type earphone/microphone set with switch (optional) or handsfree compatible device in this state, the call will continue.
Page 67 ■ Registering an entry in the PushTalk phonebook: Highlight a received call Select Yes ･ The party cannot be registered if not registered in the FOMA terminal phonebook. When a received PushTalk call made to multiple parties is highlighted, press m3, select a ･...
Page 68 Deleting received calls Delete Received Calls Highlight a received call To delete all: m62 ･･ You can also perform the same operation from the list of PushTalk call parties. Select Yes Adjusting the volume of the caller’s voice Volume Setting The volume of the caller’s voice can be adjusted from level 1 (lowest volume) to level 6 (highest volume).
Page 69 ･ The ring volume for calls is also reflected to the volume of the sound that plays when confirming the battery level, i- ppli sound and schedule alarm. Note that when STEPTONE is set, the volume of the α battery level confirmation sound and i- ppli sound is level 4.
Page 70 Example Setting operations when receiving a voice call m862 Setting operations when receiving a video-phone call: m872 ■ Setting operations when receiving a PushTalk call: m881 ■ Select each item to set Ring alert ：Sets a ring tone for an incoming call. ･...
Page 71 Screen display The following screen is displayed depending on the setting for Priority Comm Mode: Incoming packet communication during Incoming voice call during Setting voice call (other than i-mode)* packet communication* Screen displayed during a voice call Screen displayed during incoming voice call No Set Up Voice call Screen displayed during incoming packet...
Page 72 Default Standard Example Setting a recorded guidance m864 Select On-hold tone field To reset to the default guidance: 1 ･ Go to Step 4 Select Record in Edit message field Speak a response hold guidance after a start tone Recording will start after a message is displayed. ･...
Page 73 Using Public mode (Driving mode) Public mode (Driving mode) Public mode (Driving mode) is an automatic answering service considering etiquette in highly public places. When Public mode (Driving mode) is activated and a call is received, a guidance is played and informs the caller that the called party is driving or in an area (bus, train, movie theater, etc.) where use of the phone should be refrained and cannot answer the call.
Page 74 Service Receiving voice calls Receiving video-phone calls ･･ Caller ID If the other party does not notify the caller If the other party does not notify the caller Request ID, a guidance requesting caller ID is ID, a message with image requesting caller Service played and the call is then disconnected.
Page 75 ■ When Public mode (power off) is activated The setting is retained until Public mode (power off) is canceled by dialing “ 25250”. The setting is not canceled by turning the power on. The Public mode (power off) guidance is played even in locations outside the service area or where radio waves are hard to reach.
Page 76 It is advisable that the contents of recorded messages be separately written down in a notebook, etc. Recorded data may be lost due to failure, repair, change of model or other handlings of FOMA terminal. If the data should be erased, DoCoMo assumes no responsibility for the loss of any data. Menu 4711...
Page 77 INFORMATION You can answer a call even while playing the greeting or recording a message. Press n to answer a voice call. ● For a video-phone call, press n or t to answer by sending your image or a to answer by sending the substitute image.
Page 78 Press p INFORMATION ● If you delete the recorded greeting, the default greeting is returned. Menu 472 Playing recorded messages You can play or delete recorded messages from the list. Unplayed recorded messages, if any, can be played quickly from the stand-by display. ☛P35 ･...
Page 79 Making/Receiving Video-phone Calls Video-phone ......................78 Making video-phone calls ................78 Receiving video-phone calls ................82 Using Chara-den ....................83 Setting images to be sent to the other party ..........84 Customizing the display settings during a video-phone call .......88 Changing the video-phone settings ......Videophone Settings Setting of switching between a voice call and a video-phone call ..................
Page 80: Video-Phone
Video-phone The video-phone function is available between terminals that support DoCoMo’s video-phone. By using the video-phone, you can talk on the phone while looking each other images. It is also possible to display a still image, substitute image, Chara-den, etc. instead of your self image.
Page 81 Enter a phone number ･ Entering method is the same as for the voice calls. Your image is displayed while being connected. ･ If the phone of the other party is busy, you will hear a busy signal. The message, Busy. or Connection failed. is displayed on the screen. Press f to end the call and call again later.
Page 82 INFORMATION You can also make a video-phone call by performing in order of Steps 2, Step 1. When t is pressed and the ● phone number is entered, the video-phone call is made automatically after about 5 seconds. ● When Speakerphone is set to ON in Videophone Settings and Silent Mode is active, if you make a video-phone call, a confirmation screen appears asking whether to switch to the speakerphone call.
Page 83 Switching from a video-phone call to a voice call You can switch to a voice call by operating from the submenu during a video-phone call when the other terminal is compatible with switching calls. Switching can be performed only from the terminal which made the video-phone call.
Page 84: Receiving Video-Phone Calls
Receiving video-phone calls You cannot receive a video-phone call by pressing the keys other than t or n (Any Key Answer is ･ unavailable). A call is received The ring tone sounds, the display light turns on and the call indicator lights/ flashes.
Page 85: Using Chara-Den
INFORMATION ● When Speakerphone is set to ON in Videophone Settings and Silent Mode is active, if you receive a video-phone call, a confirmation screen appears asking whether to switch to the speakerphone call. Select YES or NO. ● When a video-phone call arrives while a flat type earphone/microphone set with switch (optional) is connected, the voice sounds from the connected earphone/microphone regardless of the setting for Speakerphone in Videophone Settings.
Page 86: Setting Images To Be Sent To The Other Party
INFORMATION ● For details on making a video-phone call after displaying Chara-den or on setting Chara-den as the video- phone substitute image, see “Displaying Chara-den”. ☛P334 ● Some Chara-den has no actions. Setting images to be sent to the other party The following items can be set: Item Page...
Page 87 Setting a frame on the outgoing image Frame The frame can be set while sending your self image. ･ Only the frame with the display size of 176 x 144 (QCIF) or smaller can be selected. As for the downloaded frames, only the frame with the display size of 176 x 144 (QCIF) can be selected. m31 during a call Select a frame ･...
Page 88 1 to 9, 0, ( or # Press & to switch the pages. ･ The effect currently applied Adjusting the brightness/color density/flicker of outgoing images Camera Settings You can adjust the brightness and color density in 5 levels. Also, you may be able to control the flicker of images, if it occurs, by making settings according to the power supply frequency in your area.
Page 89 Sending a still image: 4 ■ Select a folder Select a still image ･ To display a still image: Highlight a still image To display the previous image: o while sending a still image ･ Switching display magnifications Zoom ･ Available only while your self image is being sent.
Page 90: Customizing The Display Settings During A Video-Phone Call
Default Macro OFF m4 during a call To turn off the macro mode: m4 ･ INFORMATION ● If you switch the camera to the in-camera in the macro mode, the camera returns to the normal mode. Turning the compact light on ･...
Page 91: Changing The Video-Phone Settings
Changing the video-phone settings Videophone Settings Set the operation to be performed when a video-phone call is not connected and the screen displayed during a video-phone call. You can also set whether to send your self image to the other party for outgoing calls. ･...
Page 92 Setting the image to be displayed during video-phone calls Image Setting Change the images to be sent to the other party during a video-phone call such as the substitute image, answer machine image, response hold image, on-hold image and movie memo image. ･...
Page 93: Setting Of Switching Between A Voice Call And A Video-Phone Call
Select Image field To reset to the default image: 1 ･ Go to Step 5 In case of the answer machine image Select Select image in List images field Select a folder Select an image The operation procedure is same as when setting other still images. ☛P90, Step 2 in “Setting the ･...
Page 94: Using The Video-Phone By Connecting With The External Device
Refer to the instruction manual of external devices for hardware requirements or setting/operating instructions of video-phone applications. ･ The application called “ドコモテレビ電話ソフト 2005 (DoCoMo video-phone software 2005)” that is compatible with this function is available on the DoCoMo video-phone software website. Visit the site below and download it: http://videophonesoft.nttdocomo.co.jp/ Default Terminal...
Page 95 PushTalk What’s PushTalk?....................94 Making PushTalk calls ..................94 Receiving PushTalk calls..................96 Registering entries into the PushTalk phonebook ..............PushTalk Phonebook New Entry Making a PushTalk call by using the PushTalk phonebook......99 Deleting members from the PushTalk phonebook ................ Delete PushTalk Phonebook Setting for incoming/outgoing PushTalk calls ..........101...
Page 96: What's Pushtalk
On the screen, you can see who is speaking and the states of the other members. This function is very useful for communication within a group or a brief conversation only to deliver a message. ･ This function is only available between DoCoMo terminals that support PushTalk. ･ For details about the PushTalk service, see the PushTalk booklet.
Page 97 Communicating on PushTalk Enter a phone number ･ Do the same as you enter a number for a voice call. When the other party answers, the answering tone sounds like “pico-pico” and PushTalk starts. PushTalk button Making a call with the speakerphone function: g (for over a second) ■...
Page 98: Receiving Pushtalk Calls
Operation during PushTalk The following operations can be performed from the submenu. You can change the volume during PushTalk with %. Submenu item Description Page a Reconnect alarm* Set an alarm sound indicating reconnection of a PushTalk call under improved signal quality which has been cut off due to poor signal quality.
Page 99 INFORMATION ● Even after you exit from the PushTalk communication, you can rejoin the communication from the received call history while the caller is communicating on PushTalk. ● You cannot answer incoming calls during a video-phone call, video-phone call through an external device, data communication, software update, or pattern definition update.
Page 100 Select Yes To register additional members: a ･ Repeat Steps 2 to 5. INFORMATION ● To register a member from the FOMA terminal phonebook to the PushTalk phonebook, select a party from the phonebook list, press m7, and select Yes. When multiple phone numbers are registered, select the desired phone number and select Yes.
Page 101: Registering Entries Into The Pushtalk Phonebook
Making a PushTalk call by using the PushTalk phonebook ･ To make a PushTalk call to multiple parties, their phone numbers must be registered in the PushTalk phonebook. g (for over a second) Members are displayed in the following order of readings: a Japanese syllabary order b Alphabetical order c Numbers...
Page 102 Making a PushTalk call from the PushTalk group g (for over a second) Select the group To make a PushTalk call to all the members of a group: g (for over a second) ･ Highlight the group Go to Step 3 Select the member to make a PushTalk call ･...
Page 103: Deleting Members From The Pushtalk Phonebook
Deleting a member registered in the group g (for over a second) Select the group Highlight the member Select Yes ･ Deleting a group member does not delete the member from the PushTalk phonebook or the FOMA terminal phonebook. Setting for incoming/outgoing PushTalk calls Set the operations for incoming/outgoing PushTalk calls.
Page 104 Setting ringing time for ring alert PushTalk Ring Time Set the period of ringing time to keep the ring tone sounding. If you do not answer within this period, disconnection results. ･ When Delayed ring alert in Mute Ring Time Setting is set to ON, this setting starts after the mute ring time elapses.
Page 105 INFORMATION ● Voice Mail Service and Call Forwarding Service are optional subscriber services. Without subscription, if you set Voice Mail or Call Forwarding, action of Answer takes place. Menu 294 / Menu 887 Setting operations for an incoming PushTalk call during i-mode i-mode Arrival Act: PT Default PushTalk preferred The same operation is possible by pressing m56 in the member list.
Page 106 MEMO...
Page 107 Phonebook Phonebooks supported by FOMA terminal ..........106 Registering entries into the FOMA terminal phonebook ................... Phonebook New Entry Registering entries into the UIM phonebook ................UIM Phonebook New Entry Setting group names and incoming/outgoing actions..Group Setting Making calls from the phonebook....... Phonebook Search Editing phonebook entries ..........
Page 108: Phonebooks Supported By Foma Terminal
Phonebooks supported by FOMA terminal FOMA D902i supports the FOMA terminal phonebook and UIM phonebook. Besides, the PushTalk phonebook can be used for exclusive use of PushTalk. ☛P97 ･ The items that can be registered in the FOMA terminal phonebook and UIM phonebook are as follows: ○...
Page 109 Please be informed that if you copy the data registered in FOMA terminal to a new terminal at a DoCoMo Shop when switching to a new model, etc., the specifications of some new models may not allow copying of the data.
Page 110 Enter a name (Up to 32 one-byte or 16 two-byte characters) ･ Kanji, hiragana, katakana, alphabetic and numeric characters, symbols and pictograms can be entered. However, symbols and pictograms entered may not appear correctly if transferred by infrared communication, etc. ･...
Page 111 Phone number ：Enter the phone number including the area code (up to 26 digits) and select an icon. ･ Up to 5 phone numbers per person can be registered. Saving the first phone number displays items to be added. ･ Pause (P), timed pause (T), “...
Page 112 A phone number saved in the phonebook with preceding 184 or 186 does not allow sending of SMS even if it is selected as the address. In addition, if a party whose mail address is “mobile phone number@docomo.ne.jp” is saved in the phonebook with preceding 184 or 186, no i-mode Mail can be sent to the address.
Page 113 INFORMATION ● For saving mail addresses of i-mode terminals, the @ and the following domain name (“@docomo.ne.jp”) of the addresses can be omitted, however, it is recommended to save the whole addresses including “@docomo.ne.jp”. For saving mail addresses of i-mode terminals as chat members, save the whole addresses...
Page 114 Setting group names and incoming/outgoing actions Group Setting You can change the group name of the FOMA terminal phonebook or UIM phonebook and set the ring tone by group in the FOMA terminal phonebook. ･ In Group Setting of the UIM phonebook, only the group name can be modified. ･...
Page 115 Menu 41 Making calls from the phonebook Phonebook Search You can make a call easily by calling the other party’s phonebook data from the FOMA terminal phonebook or UIM phonebook. ･ The phonebook data can be called by specifying the following search procedure. And the searching method can be specified by pressing p on the stand-by display.
Page 116 Searching Mail Example When searching received mail m151 Highlight the party Received mail from the party highlighted are listed. For reading received/sent mail ☛P259 ･ To return to the phonebook list: c or m0 ･･ Operation is also available from details (TOP/Mail/Phone) screen. ･...
Page 117 Searching by name Name Search Enter a name to search for the entries that start with the first character of the entered name. m413 Enter a name ･ You can search the name by entering the first part of the name even if you do not enter the entire reading.
Page 118 Searching by phonebook No. Ph Book No. Search Enter a phonebook No. from the FOMA terminal phonebook to search for the entry with the specified phonebook No. You can search the entries even if you enter nothing. m415 Enter a phonebook No. Icon set for the first phone number Phonebook No.
Page 119 Example Searching for “ 佐藤 ” (Sato) The phonebook list with readings starting with a kana character in the “ さ (sa)” line In the search result screen, pressing 0 to 9, #, ( or & switches lines. ･ Specifying the searching method The searching method to display can be specified by pressing p on the stand-by display.
Page 120 ■ Displaying detailes of registered information (only for the FOMA terminal phonebook): & Each time you press r, the details screen switches as follows: TOP ･ Mail Other Phone. Press l to switch the screen in the reverse order. ･ Mail screen displays the total number of mails sent/received and the date and time of the last mail.
Page 121 ･ In case of deleting the phone number registered in the PushTalk phonebook from the FOMA terminal phonebook, when selecting Overwrite after entering the phonebook No., a confirmation screen appears asking whether to delete from the PushTalk phonebook. When selecting Yes, the entry is deleted from the PushTalk phonebook.
Page 122: Copying Phonebook Entries
Search the phonebook Change the order ■ Changing the order of phone numbers: m921 a Highlight the entry b Select a phone number to register as the first phone number. The position of the selected phone number and the first phone number are changed.
Page 123: Deleting Phonebook Entries
Select an entry FOMA terminal phonebook Press p INFORMATION On the FOMA terminal phonebook details screen, press m and select IrDA/miniSD/UIM → Copy to UIM and ● on the UIM phonebook details screen, press m and select IrDA/Phone mem → Copy to phone. Deleting phonebook entries Delete Phonebook Delete one phonebook entry.
Page 124 Mail. You can check it by the same operation as the setting of a secret code. ● If a mail address is saved in the phonebook as “mobile phone number ＋ secret code@docomo.ne.jp”, you cannot reply to mail from the party. Delete “secret code” or “secret code@docomo.ne.jp” in the phonebook...
Page 125 Protecting the secret phonebook entries Secret Attribute The phonebook entry is set as the data having a secret attribute that is called only when you enter the terminal security code. To set Secret Attribute, perform the setting operation in Secret Mode. Setting Secret Attribute for the phonebook entry ･...
Page 126 INFORMATION ● The phonebook data with Secret Attribute set cannot be searched unless Secret Mode is set. In addition, Quick Dial or Quick Mail is also disabled. ● When the search other than Secrecy Search is performed in Secret Mode, the phonebook data with and without Secret Attribute set are both searched.
Page 127 Sounds/Displays/Lights Settings Sound Setting Changing the FOMA terminal ring tone ......Sound Setting Using vibrator to signal incoming calls and alarms ..Vibrator Setting Setting a sound heard when the keys are pressed ..Keypad Sound Setting an alert sound for charging ........Charge Alert Setting an alarm announcing that the call is about to be cut off ....................
Page 128 Sound Setting Changing the FOMA terminal ring tone Sound Setting Set the sound to announce the reception of call, PushTalk call, mail, Message R/F, etc. In addition, the sound played while on hold or when opening/closing FOMA terminal can be set. If video/i-motion is set as a ring tone, an image and/or sound is played for incoming call or mail (Movie ringtone (Chaku-motion)).
Page 129 3D Sound The 3D sound function allows to create sounds, that is 3-dimensional and special sounds, using the stereo speakers or the flat type stereo earphones (optional), etc. Very realistic i- ppli games, ring alerts and i-motion can be enjoyed. α...
Page 130 ■ Ring tone priority Ring tones set in multiple functions sound according to the following prioritization: a Incoming setting for Multi Number b FOMA terminal phonebook setting c Group Setting of the FOMA terminal phonebook d Sound Setting/Incoming Call Setting/Incoming Videophone Setting/Incoming Msg. Setting/ Incoming Chat Mail Setting/Incoming Msg.
Page 131 ● The volume of open slide/close slide sound cannot be changed. The 3D sound compatible melody can be set for beep sounds, but 3D sound becomes unavailable. Using vibrator to signal incoming calls and alarms Vibrator Setting The reception of call, PushTalk call, mail, Message R/F, etc. or the schedule alarm notice is indicated by vibration.
Page 132 Setting a sound heard when the keys are pressed Keypad Sound ･ The confirmation sound for displaying the battery level is also changed. ･ The keypad sound does not sound when pressing the following keys or sliding the keylock switch. ・C ・g ・One-push open button...
Page 133 Making FOMA terminal silent Silent Mode Disable the sounds from FOMA terminal in order to prevent disturbance to the people around you by enabling the vibrator for incoming calls or muting the keypad sound. Default not set m (for over a second) or # (for over a second) The silent mode that is specified in Customize Silent Mode is set, (in the general silent mode) or (in the personalized silent mode) is indicated on the stand-by display.
Page 134 Select each item to set ：Sets the operation of vibrator when receiving a call, PushTalk call or mail. Vibrator alert ･ When ON is set, an incoming call or mail is informed by vibration according to Vibrator Setting (☛P129). Note that when OFF is set in Vibrator Setting, the vibrator operates by Pattern A.
Page 135 m8211 1, 3 or 4 Select a folder Select the image, video/i-motion or Chara-den To check the image, highlight the image in the image list and press p. The following operations ･ can be performed on the image display screen: ・...
Page 136 INFORMATION ● The setting may not be available depending on the image. ● The display of Fit length or Fit width can be set for, in case of JPEG format, only the image with the size of width and length (or length and width) of 8 x 8 to 640 x 480, 960 x 1280, 1200 x 1600 or 1728 x 2304, in case of GIF format, only the image with the size of width and length (or length and width) of 8 x 8 to 640 x 480.
Page 137 INFORMATION ● Some video/i-motion may not be able to be set for the stand-by display. The video/i-motion with only sound (i- motion with no image such as the vocals of singers) cannot be set. ● When Flash movie or Chara-den is set for the stand-by display, playing is stopped after a certain period of time.
Page 138 Setting i- ppli Stand-by Display α ･ ppli Stand-by Display can be set simultaneously with other settings for selecting the stand-by α display, setting a calendar or customizing the screen. When they are set simultaneously, the i- ppli α stand-by display is displayed by priority. ･...
Page 139 Customizing the stand-by display Custom Stand-by The stand-by display can be divided into several areas to display the latest information such as unread mail or missed calls, notes, calendar or schedule for each area. The pattern of dividing areas can be selected from the following 7 types: Pattern 1 Pattern 2...
Page 140 Checking information on the custom stand-by display Each press of f on the stand-by display switches between displaying/not displaying the custom ･ stand-by display. Display the custom stand-by display before operations. The top area is displayed with a red frame. Press % to move the cursor frame.
Page 141 ■ Schedule The scheduled entries are displayed in the order of the date and time. Select this area to display the details of the first schedule. ･ The icon, the date and time and the beginning of the contents are displayed. ･...
Page 142 Select Display image field To set the default image: 1 ･ Go to Step 5 Select Select image in Image list field Select a folder Select an image Press p INFORMATION ● Setting Created animation displays the first frame. Displaying images saved in the phonebook for incoming/outgoing calls Contact Image When a voice/video-phone call from/to the other party registered in the phonebook is received/made, the portrait image saved in the phonebook can be displayed.
Page 143 6 to 8 To set an image to be displayed when sending i-mode Mail or SMS: 6 ･ To set an image to be displayed when receiving i-mode Mail, SMS or Message R/F: 7 ･ To set an image to be displayed when performing Check i-mode Message or Check SMS: 8 ･...
Page 144 ：Sets the brightness of the display to be lit. Brightness AC adapter connected ： Sets how to light the display when connecting to the AC adapter (desktop holder) or to the DC adapter. ･ Setting Terminal settings lights according to the settings of the above items. ･...
Page 145 Setting the menu display format or menu design Menu Setting The menu display format or the icon design can be changed. The design of the first-level menu that appears first when pressing m on the stand-by display can ･ be changed. ・The type of tile icons for the normal menu can be selected from the following 5 types.
Page 146 Creating the original menu design Two kinds of the design of the menu screen can be created by changing the icons or background images of the menu. ･ When the image size exceeds 96 x 96 for icons and 240 x 240 for background images, they are reduced to be displayed.
Page 147 Setting the color and lighting pattern for the call indicator Alert Lighting Setting Set whether to flash the call indicator or not when there is the newly-arrived information such as missed calls or unread mail or whether to light the call indicator when the FeliCa mark is held up to the reader/writer.
Page 148 1 to 9, 0, ( or # b Select Color field Press & to switch the pages. ･･ The call indicator flashes by the selected color. 1 or 2 ■ Setting IC card: Select IC card field ･ When ON is set, the call indicator lights when holding up the FeliCa mark to the reader/writer. Press p INFORMATION ●...
Page 149: Setting The Clock Display
Menu 8213 Setting the clock display Clock Display Format Set whether to display the clock on the stand by display. The clock design, the time display format (24 hour format/12 hour format), the clock display position and the language used to display the day of the week can also be set.
Page 150 Coordinating according to the color of FOMA terminal Style Theme The stand-by display, the clock display, the color theme and the menu icon are coordinated in total by the color of FOMA terminal. They can also be changed to be coordinated corresponding to the other colors.
Page 151 Safety settings Security code Security codes available with FOMA terminal ..........150 Changing the terminal security code ....Change Security Code Setting the PIN code ..................151 Unblocking the PIN lock .................153 Restricting Mobile Phone Operations Various lock functions ...................153 Preventing unauthorized use of your terminal ......All Lock Preventing unauthorized use of your terminal by remote access ....................
Page 152 Some FOMA terminal functions for convenient use require the entry of security codes. There are the network security code for use in network services and DoCoMo e-site, password for i-mode in addition to the terminal security code for various functions. Fully use your FOMA terminal by choosing the security code to suit your needs.
Page 153: Setting The Pin Code
Changing the terminal security code Change Security Code ･ Enter the 4 to 8 digits number for the terminal security code. ･ The entered terminal security code is masked with “ ＊ ”. Default 0000 m835 Enter the current terminal security code ･...
Page 154 When PIN1 Code ON/OFF is set to ON When FOMA terminal is powered on, the PIN1 code entry screen is displayed. After entering the correct PIN1 code, the stand-by display appears. ･ Making/receiving calls or PushTalk calls or operating the communication functions is unavailable if a wrong PIN1 code is entered.
Page 155: Various Lock Functions
･ Please be notified that, if you forget the PUK or the PIN lock is blocked completely, you need to bring FOMA terminal, the UIM in use, and the identification (driver’s license, etc.) to a DoCoMo Shop. ･ The PUK and PIN1/PIN2 code entered are masked with “ ＊ ”.
Page 156 ･ You can make emergency calls (110, 119 or 118) even when the lock functions are set. Item Description Page All Lock Disables operating the menu functions to prevent unauthorized P154 use by others. Remote Lock Prevents unauthorized use of your FOMA terminal by others by P155 setting All Lock and IC Card Lock by remote control in case your FOMA terminal is lost or stolen.
Page 157 ● The calls or PushTalk calls received during All Lock are rejected but, they are recorded as missed calls in the received call history. (The other party hears busy signals for the call, or is notified Disconnected for the PushTalk call.) When All Lock is canceled, with the number of missed calls is displayed on the stand-by display.
Page 158 INFORMATION ● If the phonebook data in which a pause (P) or timed pause (T) has been set is registered to the sender’s information, the information registered after the pause (P) and timed pause (T) is deleted. Setting Remote Lock Remote Lock is activated by making a voice call to FOMA terminal under the preset conditions.
Page 159 c (for over a second) Select Yes Self Mode is set and is indicated on the stand-by display. When you use shortcut operations: 1 ･ Select Yes Canceling: c (for over a second) ■ When you use shortcut operations: 2 ･...
Page 160 ･ Even if a call or PushTalk call is received from a caller registered in the phonebook, only phone number is displayed without the caller’s name. ･ is not displayed on the stand-by display even when Answer Machine is set because Answer Machine does not operate.
Page 161 Preventing unauthorized use of the functions such as phonebook or mail Privacy Mode Setting Setting the Privacy Mode operation Set whether to enter the terminal security code when using the phonebook/PushTalk phonebook, mail or My Picture while Privacy Mode is on. Also, you can set Privacy Mode to manually start or to automatically start when no operation has taken place in a certain period of time.
Page 162 Starting Privacy Mode ･ If you set Privacy Mode to start automatically in Privacy Mode Setting, it is started according to the setting. l (for over a second) Canceling: l (for over a second) ■ Enter the terminal security code ･...
Page 163 Default not set Slide down the keylock switch and then take off your finger Key Lock is set and is indicated on the stand-by display. ･ When Key Lock Setting is set to OFF when slide open, if you set Key Lock while FOMA terminal is opened, Key Lock is set in the state of temporary release.
Page 164 Rejecting/accepting incoming calls from the specified phone numbers Reject/Accept Call Reject/Accept Call is set for each phone number registered in the FOMA terminal phonebook. ･ To use this function, set Reject/Accept Call for each phone number and then enable Reject/Accept Call.
Page 165 2 or 3 Enter the terminal security code To cancel the setting: 1 ･ INFORMATION ● If a call with no caller ID is received from a party that you set Reject Call to, FOMA terminal operates according to Anonymous Caller regardless of this function’s setting. ●...
Page 166 INFORMATION ● When Call Rejection has been set, the rejected calls are recorded as missed calls in the received call history. ● Standard image is set when the video/i-motion with only sounds (i-motion with no image such as the vocals of singers) is set for Movie ringtone in the incoming setting.
Page 167 ● If you receive a call or PushTalk call from the phone number set to be rejected in Reject/Accept Call or Anonymous Caller, Reject/Accept Call or Anonymous Caller is prioritized over this function. ● In case Delay time is set to the same number of seconds as the set time for Voice Mail Service or Call Forwarding Service, the ring tone may sound.
Page 168 Other “Safety settings” Other “Safety settings” The following Safety settings can be used. Purpose Function or Service Page To receive only necessary mail messages out of large-volume Receive Option Setting P273 messages received To change mail addresses Change Mail Address “...
Page 169 Camera Before using the camera ................168 Shooting still images with the camera ........Still Camera Recording videos with Movie Camera ....... Movie Camera Setting the still image/video size or the saving method ............Still Image Setting/Recording Setting Shooting by various methods ...............182 Changing the settings for shooting ..............183 Sending still images shot during voice calls .....
Page 170: Before Using The Camera
Before using the camera Still images and videos can be shot with your FOMA terminal camera. Still images and videos can be displayed/played on FOMA terminal or saved to the miniSD memory card, can be sent via i-mode Mail as attachments or can be sent via infrared communication. ･...
Page 171 Lens cover ･ In the stand-by display mode, opening the lens cover activates the out- camera with open cover sound. ･ While shooting with the out-camera, closing the lens cover during a shooting stand-by deactivates Camera or Movie Camera with close cover sound.
Page 172 Shooting screen and files Viewing the shooting/recording screen a b d e f d e f g Video recording screen Still image shooting screen Function/status ：Indicates the functions in progress or the status of shooting. : Still Camera ☛P172 : Movie Camera ☛P178 ：Indicates the memory to save.
Page 173 INFORMATION ● The indicator, counter and size restrictions are not displayed when the screen is started from i- α ppli. You can only switch the in-camera/out-camera, switch the macro mode/normal mode, turn on the compact light, start auto timer and zoom in/out can be operated. ●...
Page 174 ■ Recording time of videos that can be saved in FOMA terminal (estimates) Recording time per 1 recording Maximum recording time on FOMA (unit: second) terminal (unit: minute) Size Recording Size restrictions type Quality Quality 128 x 96 Msg attach Video + Voice Video only 176 x 144...
Page 175 Shooting still images The image can be shot by focusing to the object in the center of the screen by using auto focus function. ･ The distance that auto focus brings the camera into focus is from approx. 30 cm or more for the standard mode, and approx.
Page 176 View and confirm the still image ･ To save the still image immediately: Go to Step 4 To retake another image without saving the shot image: c ･ To enlarge the still image with the display size of 176 x 144 (QCIF) or smaller and check it: u ･...
Page 177 Switching the memory to save between FOMA terminal/miniSD memory card: m7 ■ ･ After saving the still images, the setting for the memory to save returns to the setting before switching. Displaying the list of images stored in FOMA terminal: m8 1 or 2 ■...
Page 178 ● During adjusting the focus, (gray) on the screen changes to (black). In addition, in case of shooting with focus lock or manual continuous shooting, if the camera comes into focus, changes to (green). ● When the camera does not come into focus, the focus frame may change to a red “ ＋ ” and (red) may be displayed.
Page 179 ･ If Auto save of Still Image Setting is set to Yes, the shooting screen reappears after still images of the predefined number are shot and saved. The operations after Step 4 are not needed. To stop manual continuous shooting or manual four-frame shooting on the way, press p. ･...
Page 180 Recording videos with Movie Camera Movie Camera ･ At the time of purchase, the video with sound is set to be shot. It can be changed in Recording Setting. ･ Shutter sound is heard even when Silent is set in Ring Volume Setting or Silent Mode or Public mode (Driving mode) is active.
Page 181 ･ When the image size is set to 320 x 240 (QVGA), the video cannot be attached. ･ When the quality of video is set to HQ+, the video cannot be attached. Setting the video for the stand-by display: m21 ■...
Page 182 ● You should avoid a continuous shooting of video/sound that lasts 10 hours or more, because you may fail to display or replay the video/sound if it is saved in the miniSD memory card. ● When a call or PushTalk call arrives or the alarm or schedule alarm time gets to the setting time during video recording, the recording is stopped at that point.
Page 183 Item Still image Video/sound Description Sets whether to insert the shooting date and time at the lower right of Shooting date/ ○ × time the still image. Sets the quality of video/sound files to be saved. ☛P186 Quality* × ○ (video) Sets the type of video/sound to be recorded.
Page 184 Shooting by various methods Zooming The display magnifications which can be changed in each image size are as follows: Out-camera In-camera Shooting Image size Max. display Max. display method Zoom scale Zoom scale magnification magnification Still image 96 x 72 (phonebook) 28 times 65 scales 2 times...
Page 185 Using auto timer Since the shutter is automatically released after the specified number of second has elapsed, you can take your own picture and avoid blurring of images due to hand movement. ･ The number of second until the shutter is released can be set in Still image Setting or Recording Setting. m5 on the still image shooting screen or the video recording screen Auto timer is set and is indicated.
Page 186 Example Setting a frame & to highlight the icon of frame on the still image shooting screen or the video recording screen ･ Similarly, to change other settings than a frame, highlight each icon. Keys 1 to 9 and 0 are assigned to the icon in order from the ･...
Page 187 Image size You can set the following image size: Shooting Size Icon Sending mail available/not available method Still 96 x 72 (phonebook) Images can be attached to i-mode Mail to send to an Camera i-mode terminal or PC. In addition, these sizes are suitable 128 x 96 (Sub-QCIF) for attaching to Deco-mail.
Page 188 ：Shot images will look like oil paintings. Painting ：Enables you to shoot a woodprint-like images, taking advantage of black-and- Woodcut white contrast. ：Skin-color looks brighter and whiter. Recommended for indoor shooting. Whiten ：Skin-color looks sun-tanned. Recommended for outdoor shooting situation. Suntan ：Blurs the outlines to soften the image.
Page 189 Standard ：Provides the standard quality ：Provides the highest quality. The file size is enlarged. Fine ■ During video recording LP ：Provides the lowest quality. The file size is reduced and the recording time becomes the longest. STD ：Provides the standard quality HQ ：The video motion becomes smooth.
Page 190: During A Voice Call
m24 on the still image shooting screen/video recording screen 1 to 3 ：Adjusts to reduce the flicker automatically. Auto 50Hz (East-Japan)：Adjusts according to the electromagnetic wave frequency of Eastern Japan. 60Hz (West-Japan) ：Adjusts according to the electromagnetic wave frequency of Western Japan. Restoring the default settings during shooting Reset the settings for the scene mode/effect, brightness, color density, white balance and flicker adjustment to the default settings.
Page 191 (kanji, kana and pictograms) or data such as melody or image with the vertical and horizontal patterns. The left QR code shows the text data “FOMA D902i”. Scanning the code Activating Bar Code Reader switches to Macro automatically. Keep the out-camera about 6 to 9 cm away from the code to scan.
Page 192 Scan the code When you point the out-camera toward the code, the code is scanned automatically. If scanned correctly, a confirmation sound is played and the scanned data is displayed. ･ When it is hard to scan the code, if you adjust the distance, angle or direction of the code and the out-camera, the code may be able to be scanned.
Page 193 Using the scanned data The available operations vary depending on the scanned data. Example Adding data to the phonebook Open the lens cover Select the scanned data ■ Deleting the scanned data: Select the data Select Yes To delete all: m32 ･...
Page 194 MEMO...
Page 195 i-mode/i-motion What’s i-mode? ....................194 Displaying sites Displaying sites ....................198 Reading and operating sites ................200 Using My Menu ................My Menu Changing your current i-mode password into another number ................Change i-mode Password Displaying Internet websites ........Internet Connection Registering websites and i-mode sites for quick browsing ..Bookmark Saving site contents..............
Page 196 INFORMATION What’s i-mode? ● When you newly subscribe to the FOMA service, all services are available as of the first day. ● My Menu is carried over as it is when you change With i-mode, you can use online services such as the mova service (with i-mode subscription) to the connecting to Sites (Programs) or Internet FOMA service.
Page 197 α ppli stand-by display, i- α ppli can be This service is provided by DoCoMo or IPs and used as the stand-by display, which also allows delivers graphical information such as news and directly receiving mail and making phone calls.
Page 198 ■ i- ■ Infrared communication function α ppli DX ppli DX is more useful and enjoyable i- ppli. In Phonebook data, mail, bookmarks, etc. can be α α conjunction with the i-mode terminal data (such as exchanged with mobile phones, PCs and other mail, call log or phonebook data), i- α...
Page 199 ■ トクだねニュース便 (Convenient News) Images using Flash movie can be downloaded to This service is provided by DoCoMo and delivers i-mode terminals and set for the stand-by display. information such as news and weather...
Page 200: Displaying Sites
● Data saved/registered in your i-mode terminal INFORMATION (mail, Message R/F, screen memo, i- ppli, ● Internet websites other than i-mode compatible α i-motion, and bookmark) may be erased due to websites (sites created using i-mode compatible tags) may not be displayed correctly. failure, repair, or other handling of i-mode ●...
Page 201 Select an item You are connected to a site. You can display the target page by repeating this operation. f when you finish viewing the site Select Yes INFORMATION To return to iMenu during site display, press m and select ●...
Page 202: Reading And Operating Sites
a Select Yes b Enter the PIN2 code The user certificate is sent and the FirstPass compatible page is displayed. ･ If the correct PIN2 code is not entered within 60 seconds, the SSL communication is disconnected. INFORMATION ● Establishment of SSL session requires electronic information called “certificate” for the connected site and FOMA terminal issued by the same certifier.
Page 203 Depending on the pulldown menu, multiple items can be selected by pressing o. After selecting items, ● press p. ● The information set or entered using radio buttons, check boxes, pulldown menus, or character entry fields does not replace the contents of registered bookmarks or screen memos. Flash movie displays Flash movie allows expressive sites to be displayed.
Page 204 INFORMATION When you display page A → page B → page C in this order ( a , b ), ● return to page A ( c , d ), and proceed to page D ( e ), the display record →...
Page 205 The entered i-mode password is masked with “ ＊ ”. ･ Please note that, if you forget the i-mode password, you need to bring the identification (driver’s license etc.) to a DoCoMo Shop. Select d Options in iMenu (English) Select b Change i-mode Password...
Page 206 Menu 231 Displaying Internet websites Internet Connection ･ Internet websites incompatible with i-mode may not be displayed correctly. ･ From the next time, the last URL you connected to appears. Enter a URL (up to 256 one-byte characters) Press 1 repeatedly in the alphabet input mode to enter “ / ”, “ . ”, “ - ”, etc. In addition, “http:// ･...
Page 207 Registering websites and i-mode sites for quick browsing Bookmark If you frequently browse the same pages of sites, you can register them in Bookmark for convenient access later. You can quickly display the pages by only selecting bookmarks. Maximum number of bookmarks that can be registered ☛P36 ･...
Page 208 Enter a title (up to 24 one-byte or 12 two-byte characters) ･ If you save the bookmark without entering a title, the URL is displayed in the bookmark list. ･ When the title or URL is longer than 21 one-byte or 10 two-byte characters, 19 one-byte or 9 two- byte characters followed by “…”...
Page 209 Moving/copying bookmarks Bookmarks can be moved to other folders or copied to the miniSD memory card. Select a folder Highlight a bookmark Moving selected bookmarks: m62 ■ Select bookmarks Copying a bookmark to the miniSD memory card: m631 ■ Select Yes ■...
Page 210 Menu 24 Displaying screen memos Select a screen memo : Ordinary screen memo : Protected screen memo The available operations are the same as on site displays with a few exceptions. ☛P200 ･ INFORMATION In the site screen, press m and select Screen memo → Display. If the character encode has been changed, it is ●...
Page 211 Deleting screen memos ･ Protected screen memos cannot be deleted. Cancel protection first and then delete them. Highlight a screen memo Deleting selected screen memos: m22 ■ Select screen memos Deleting all screen memos: m23 ■ Enter the terminal security code Select Yes INFORMATION In the screen memo screen, press m and select Delete.
Page 212 INFORMATION ● Some items may not be available for setting depending on the image file. ● Some images may not be displayed correctly. ● When displaying a site containing an image wider than the display, the image will be reduced. ●...
Page 213 Display a site Select PDF data The data is downloaded and then displayed on the PDF compatible viewer. ☛P359 Press o to stop downloading. ･ When a password is set for the PDF data, enter the password and press p. ･...
Page 214 Select each item to set ･ Display name can contain up to 36 one-byte or two-byte characters. ･ Comment can contain up to 100 one-byte or two-byte characters. Press p mode folder of Chara-den. ☛P334 The Chara-den is saved in INFORMATION ●...
Page 215 Example Copying the URL of current site Display the URL of a site Displaying the URL ☛P202 ･ Select the start position of the copying range Select the end position Press mo to select all the text. ･ Press c to specify the start position again. ･...
Page 216 Even if you set the connection timeout to Unlimited, a connection with the i-mode Center may be interrupted due to poor signal conditions etc. Menu 296 Changing the i-mode host ISP Connection Communication You do not have to change the settings when using DoCoMo i-mode service. Default i-mode(FOMA Card)
Page 217 ■ About ISP connection communication You can connect to various providers (ISP) by changing the host of i-mode terminal of DoCoMo. Packet communication fee is charged for the ISP connection communication. ･ Please note that packet communication fee for connection to the ISP will not be included in the Pake-Houdai service.
Page 218 Set lighting：Sets how the display is illuminated. ･ When Terminal settings is set, Display Light Setting (☛P141) applies. ･ When Always on is set, the display lights up while site screens, etc. are displayed. Sound effect setting： Specifies whether to play Flash sounds. Press p INFORMATION In the site screen, press m and select Display →...
Page 219 INFORMATION The receiving screen or reception result screen will not be displayed depending on Display Priority. ☛P277 ● ● Incoming Message R/F is stored in the i-mode Center in the following cases: ･･･ When the power is off During a video-phone call During PushTalk ･...
Page 220 INFORMATION ● When this function is set, the contents of received Message R/F are automatically displayed when the Message R/F reception result screen returns to the screen that was displayed prior to reception. If you do not press any key during auto-display, the Message R/F is saved as unread. ●...
Page 221 ･ If you could not receive the image, an icon is displayed. The icon is the same as when you cannot display images on a site (☛P199). Reload images to receive them. ･ You cannot delete the image in the message. Reading the Message R/F list/view screen ･...
Page 222: Operating Certificates
When you select Display read only, protected Message R/F is not displayed. Using certificate Operating certificates Perform the operation of certificates required for the SSL communication. Menu 2971 Displaying certificates and setting certificate validity Certificate Setting Default CA Certificate1 to 9, DoCoMo Cert1...
Page 223 ･ User certificate is displayed after it has been downloaded. ･ When the blue UIM is inserted in FOMA terminal, DoCoMo Cert or User Certificate is not displayed. d971 Select a certificate from the list CA Certificate ：A certificate issued by the certifier. It is stored in FOMA terminal by default.
Page 224 Select a Request your certificate Select English ■ Invalidating the issued certificate: a Select English Select c Other settings b Select a Revoke your certificate Select c Enter the PIN2 code Select Continue d Select Continue e Select Continue Select Continue Enter the PIN2 code ･...
Page 225 FirstPass compatible sites. Any issue that arises must be settled between you and the FirstPass compatible site concerned. ● Neither DoCoMo nor the certifier provides any guarantee for security etc. in use of FirstPass or SSL. Use the services on your own judgment and responsibility.
Page 226 Using i-motion i-motion Images and sounds can be downloaded from i-mode or Internet web site and played/stored. Images or sounds saved can be played as “i-motion” or can be set for Movie ringtone (Chaku- motion). The vocals of singers can be used for a ring alert as well as melodies. (Some i-motion may not be set for Movie ringtone.) Generally, there are 2 types of i-motion as follows.
Page 227 ■ i-motion replayed after downloading data: i-motion is replayed automatically when downloading is completed. ･ During playback, the following operations are enabled: o ：Pause/replay % ：Adjust volume r ：Play at fast speed l ：Play while rewinding p ：Stop (The message is displayed indicating the completion of downloading.) m ：Display detail information ･...
Page 228 Setting as incoming image (voice call, video-phone call): m5 1 or 2 ■ ･ When an incoming image has been set, it will be replaced by the selected video/i-motion. Restrictions for setting video/i-motion ☛P329 ･ INFORMATION ● Only the i-motion in MP4 (Mobile MP4) format can be downloaded and played. i-motion in ASF format cannot be downloaded and played.
Page 229 Mail FOMA terminal mail function .................228 Composing i-mode Mail/Deco-mail Composing and sending i-mode Mail ......Compose Message Composing and sending Deco-mail ........... Deco-mail Attaching files ................Attachment Using mail templates ..................244 Saving i-mode Mail for sending later ......... Save Mail Composing mail quickly ............
Page 230 Short Mail Service allows the exchange of text Sending mail ☛P232 Receiving mail ☛P249 ･･ messages between DoCoMo mobile phones. ■ Receiving selected mail ･ Short Mail cannot be sent from FOMA terminal. You can check the subject of i-mode Mail stored in...
Page 231 Reject Unsolicited Ad Mail] You can change the part preceding the @ symbol ･ Unsolicited mail sent for the purpose of to another address like “docomo. △△ _ab1234yz advertising and publicity without receiver’s @docomo.ne.jp”. consent that is marked with “未承諾広告※” at ■...
Page 232 ● You can use Check i-mode Message or Receive INFORMATION Option to receive i-mode Mail stored in the i-mode ● The message of i-mode Mail can contain up to 5,000 Center. In addition, if new mail arrives, you can two-byte characters (10,000 bytes) but the receive it with other stored mail and Message R/F.
Page 233 i-motion Mail compatible FOMA terminal ＦＯＭＡ端末 FOMA terminal Still image sent by Sent as i-mode Mail i-shot PC, etc. i-mode Center PC, etc. i-mode Center Sent as attached image Sent as attached video Internet Internet ① Mail containing attached ① Mail containing URL for image, URL or icon (URL) attached video for attached image...
Page 234 You can use Check SMS to receive the messages ･ You can exchange SMS via overseas carriers stored in the SMS Center. ☛P285 other than DoCoMo. For more information, please ● When FOMA terminal receives the messages stored in visit the DoCoMo website.
Page 235 Enter the address (up to 50 one-byte characters) ･ When sending mail to an i-mode terminal, you may omit “@docomo.ne.jp” in the mail address. In 5-touch Input Method, press 1 repeatedly in the alphabet input mode to enter “@”, “ . ”, “ - ”, ･...
Page 236 ● An error message for address unknown etc. may not be received when mail is sent to addresses other than DoCoMo. ● When there is not enough available storage space, or the maximum number of saved items is exceeded, i-mode Mail cannot be composed. Delete unnecessary i-mode Mail and/or SMS from Unsent messages.
Page 237 Composing and sending Deco-mail Deco-mail You can decorate the i-mode Mail message by changing font size, font color, or background color and inserting still images including the ones shot with the camera to compose Deco-mail. Deco-mail can be composed in 2 ways: entering characters after specifying decoration (☛P235) and setting decoration after selecting entered characters (☛P239).
Page 238 Select the decoration Enter characters Highlight an icon on the decoration selection screen and press o to select a decoration. You can set more than one decoration by selecting multiple icons. However, Ticker, Swing and Word alignment cannot be selected at the same time.
Page 239 Changing font size (example of decoration b ): Select ■ Select a size Enter characters large selected ■ Inserting images (example of decoration ): Select Select Phone memory Select a folder Select an image 1 or 2 ･ To insert an image saved in the miniSD memory card: Select miniSD card Select a folder Select an image ･...
Page 240 ■ Making characters swing left and right (example of decoration ): Select Enter characters ･ Enter characters between ■ Changing word alignment (example of decoration ): Select Select the display position Enter characters ･ When characters are already entered and the cursor is placed between characters, a new blank line is started at the selected position.
Page 241 ■ Images in Deco-Mail picture folder ･ The following images are saved in Deco-Mail picture folder by default. If preinstalled images are deleted, they can be downloaded from the i-mode site, “My D-Style”. ☛P296 ©BVIG Specifying decoration method after entering characters You can decorate entered characters and change the decoration of characters by specifying the range.
Page 242 Select the decoration method ･ The procedure for confirming and canceling decorations are the same as when entering characters after specifying decoration. ☛P235 Changing the font color (example of decoration a ): 1 ■ Select a color ･ The color of lines (ruled lines) is also changed. Changing the font size (example of decoration b ): 2 ■...
Page 243: Attaching Files
Select a melody The melody is attached and its file name and file size are displayed in the list of attached melodies. ･ When miniSD card is selected, if you select a melody that cannot be attached, a message indicating that the file cannot be selected appears. ■...
Page 244 *3 Up to 10 images, melodies and ToruCa in total can be attached on condition that the total size including the message text is 10,000 bytes or smaller. The number of files that can be attached, however, may be reduced depending on the size of the attachment. *4 ToruCa (details) can be downloaded at the receiver side.
Page 245 ■ Attaching video/i-motion (i-motion Mail): a Select i-motion b Select Phone memory Select a folder ･ To select from the miniSD memory card: Select miniSD card Select a folder ･ To record and attach video: Select Use movie camera Record Go to Step 3 ･...
Page 246 ● When you send mail with a JPEG image exceeding 10,000 bytes attached to an i-mode terminal, the image is reduced in the i-shot Center to a size that can be sent to the i-mode terminal. ● When you send mail with GIF image, melody, ToruCa or sound attached to a mova terminal, the attached file will be deleted and mail with no attachment will be delivered.
Page 247 幸せ気分好きです･･･お願い急いでます！電話しますお茶しよ∼ (I’m happy) (I love you) (Please!) (I’m in a hurry!) (I’ll call you) (Let’s have tea) たまには遊びにいこう旅にでようよ歌いませんかおはよ！おやすみ (Once in a while...) (Let’s go!) (Let’s take a trip) (Feel like singing) (Good morning!) (Good night) 反省してます...
Page 248 Menu 18 Viewing templates and composing mail Display a list of registered templates and check the contents to set on the mail composition screen. ･ Templates cannot be read while Keypad Dial Lock is set. However, if the mail address entered in the address field of a template is registered in the phonebook, the template can be read.
Page 249 Press p The mail template is saved in Read templates. To overwrite a saved template: a ･ Select a template Select Yes ・ The preinstalled templates cannot be overwritten. ･ Display name can contain up to 20 one-byte or two-byte characters. ･...
Page 250 INFORMATION ● When auto-send mail is saved, appears at the top of the screen. ● Auto-send mail is sent about 1 to 2 minutes after entering the service area. flashes at the top of the screen while auto-send mail is being sent. When transmission fails flashes.
Page 251 a (for over a second) ■ Composing SMS: Enter the phonebook No. ･ The SMS composition screen is displayed. The first phone number registered in the phonebook entry is set as the address. Composing and sending SMS ☛P283 ･ Receiving and handling i-mode Mail Receiving i-mode Mail Mail Auto Receive When there is incoming i-mode Mail, it is automatically received and you are informed by the screen...
Page 252 ● When i-mode Mail is received from a party with the incoming mail settings made in the FOMA terminal phonebook, the settings apply to the operation. For details on checking with the phonebook, see “Name displays”. ☛P107 ･ When more than one i-mode Mail is received at the same time, the ring tone, vibrator and call indicator are activated according to the settings made for the party (sender) of the i-mode Mail received last.
Page 253 INFORMATION ● During All Lock or PIM Lock, the notification message does not appear for mail stored to the i-mode Center. ● Even if Receive Option Setting is on, all i-mode Mail in the i-mode Center is received when Check i-mode Message is performed.
Page 254 Replying to received i-mode Mail Reply to Mail ･ You may not be able to reply to some received mail. ･ You cannot reply to received SMS for which Payphone or Not support is displayed as sender or to Short Mail sent from mova terminals (with i-mode subscription). ･...
Page 255 Forwarding received i-mode Mail Forward Mail ･ You can forward received SMS in the same way. i-mode Mail is forwarded as i-mode Mail and SMS is forwarded as SMS. Select a folder Highlight a mail “FW:” followed by the subject of the received mail is entered in field (for only i-mode Mail) and the received message text in field.
Page 256 Displaying and saving attached images Display/Save Image Saved images can be viewed from Image (My Picture) of Data Box or set for the stand-by display. Maximum number of images that can be saved ☛P36 ･ Select a folder Select i-mode Mail with an image attached Image icon, file name and file size ：Can be attached to mail and output from FOMA terminal ：Cannot be attached to mail or output from FOMA terminal...
Page 257 ● Some images may not be displayed correctly. ● You can save images attached to sent mail in the same way as above. ● File name of the downloaded image can contain up to 36 one-byte characters, including alphanumerics, “ . ”, “...
Page 258 Setting for the stand-by display: m1 ■ Select Yes ･ Video/i-motion without image, i-motion with replay restrictions set and i-motion with the image size exceeding 320 x 240 cannot be set for the stand-by display. ･ Video/i-motion that can be enlarged can be set to the same size or large size. ･...
Page 259 ■ Checking the title: ･ For melodies displayed under the message (SMF format): Highlight the melody ･ For melodies displayed in the message (MFi format): Highlight the melody ■ Displaying the data as text (data display): ･ This function is not available with melodies (SMF format) that appear under the message. a Highlight the melody ･...
Page 260 Select the file name ■ Saving without downloading ToruCa (details): Highlight the file name The ToruCa is saved in ToruCa folder of the ToruCa list. 詳細 Select (Details) Select Yes The ToruCa (details) is received. INFORMATION ● When the memory is not enough or the maximum number of saved items is exceeded, a message indicating the ToruCa cannot be saved appears.
Page 261 Using the mail box Menu 11 / Menu 14 / Menu 15 Displaying mail in Inbox/Outbox Inbox/Outbox You can check received/sent/unsent i-mode Mail and SMS. The received i-mode Mail and SMS are saved to folders in Inbox and the sent i-mode Mail and SMS are to folders in Outbox. Folders in Unsent messages contains the i-mode Mail and SMS that were saved without sending and that failed to be sent and the i-mode Mail that is set to be sent automatically upon entering the service area.
Page 262 Reading the mail list/view screen ■ Reading the received mail list screen Folder name and page number/total page count are displayed at the top of the received mail list screen. Reception date/time, sender and subject (for SMS, beginning of message) are displayed in the mail list. : Unread : Unread (unable to reply) : Read...
Page 263 Notify missed call Sender Phone number SMS Center DoCoMo SMS ･ When the phone number is registered in the phonebook, the name is displayed in the sender field. ･ When the caller ID is not notified, the following characters are displayed in the sender field:...
Page 264 Adding and deleting folders Adding folders ･ In Inbox, you can add up to 40 folders other than Inbox folder and Message i- ppli folders. α ･ In Outbox or Unsent messages, you can add up to 10 folders other than Outbox folder or Unsent messages folder and Message i- ppli folders respectively.
Page 265 INFORMATION In the mail list screen, press m and select Display → Check No. of items. ● Checking mail addresses Display Address You can view an entire mail address when the whole address is not displayed or the address is registered in the phonebook and only the name is displayed.
Page 266 Searching mail Mail Search Search the mails in Inbox and Outbox by sender/receiver or by received date/sent date. ･ Received mails are searched by sender or received date. ･ Sent mails are searched by receiver or sent date. Example Searching received mails by sender Outbox ☛P259 ･...
Page 267 Changing the read/unread status of received mails ･ You cannot change the read/unread status of protected received mails. Example Changing a read mail to unread Select a folder Highlight a mail ■ Changing an unread mail to read: Highlight a mail Changing multiple read mails to unread: m54 ■...
Page 268 Deleting received/sent mail Delete Mail Unnecessary mail can be deleted from Inbox, Outbox and Unsent messages. ･ Protected mail cannot be deleted. When you delete all mail at one time, protected mail remains undeleted even if it matches the specified criteria. Cancel protection first and then delete them. Deleting received mail ○...
Page 269 Deleting sent/unsent mail Sent/unsent mail can be deleted in the following method: ○ : Available × : Unavailable Screen for starting operation Deletion method Mail deleted Folder list Mail list Mail view All messages All mail ○ × × All in folder All mail in folder ○...
Page 270 Phone Call Calls can be made to the sender of received mail or the receiver of sent mail. ･ The mail address (except “mobile phone number@docomo.ne.jp”) and phone number must be registered in the phonebook. ･ When mail addresses are registered in the phonebook entry with Secret Attribute set, calls can be made only in Secret Mode.
Page 271 Select Yes Registering phone numbers, addresses and URLs in phonebook You can register mail addresses, phone numbers and URLs in the i-mode Mail or SMS being displayed in the phonebook. You can register the data as a new entry or add data to an existing entry. Example Registering data on the received mail view screen Display the mail containing an item...
Page 272 Setting sort criteria ･ To set and activate the criteria, set auto sort to ON for received mail and sent mail. It is set to ON by default. ☛P272 ･ The criteria are valid for the mail received/sent after setting the criteria. Previously received/sent mail is not resorted.
Page 273 ● If the sender uses an i-mode terminal with its phone number set as the mail address, only the phone number is received as the address. Therefore, no sorting occurs when “mobile phone number @docomo.ne.jp” is specified in the criteria.
Page 274 Setting auto sort ･ Even if ON is set, no sorting occurs when sort criteria are not set. Default got mail criteria: ON sent mail criteria: ON Example Sorting received mail automatically To sort sent mail automatically: 2 ･ 1 or 2 Menu 194 Registering signature for mail Signature...
Page 275 Select the item to inquire ･ You cannot save the setting with no items selected. Press p Menu 1972 Setting to select and receive only necessary mail Receive Option Setting Default OFF a972 1 or 2 When ON is selected, a message indicating that mails will not be automatically delivered appears. Press o. ･...
Page 276 Press p The mail addresses are registered in the mail group. Highlight a mail group and press a to compose i-mode Mail. ･ INFORMATION ● If there is no TO address entered, mail cannot be sent. Using a mail group to enter addresses ☛P233 ●...
Page 277 ■ Deleting a registered message: Highlight a message in the quick reply message list Select Yes ■ Registering a new message: Select <New reply template> in the quick reply message list Enter the message Restoring the default settings: m2 ■ Enter the terminal security code Select Yes Menu 1975...
Page 278 INFORMATION ● When Auto play is set, displaying received mail, sent mail, mail template or Message R/F with a melody attached plays the melody once at the volume for phone set in Ring Volume Setting. When more than one melody is attached, the melodies play one after another. Press c to stop the play. Selecting the type of mail to display Display Type Only mail of the specified type is displayed.
Page 279 INFORMATION In the view screen for received/sent/unsent mail in the miniSD memory card, press m and select Font size. ● ● The new font size is retained until it is changed. Menu 191 Setting operations for incoming mail Incoming Msg. Setting You can set the operations that are performed when i-mode Mail or SMS is received.
Page 280 Using chat mail Composing and sending chat mail Chat Mail Mail can be sent and received to/from multiple addresses like making conversation. The sent and received mail can be read on the same screen. ･ Mail addresses of the receivers must be registered as a chat member in advance. ･...
Page 281 Select Nickname field Enter a nickname (up to 8 one-byte or 4 two-byte characters) ･ When the mail address matches the address registered in the phonebook, the name registered in the phonebook (the first 8 one-byte or 4 two-byte characters) is displayed in Nickname field. ･...
Page 282 Receiving chat mail Receive Chat Mail When chat mail has been started When mail with the subject containing “チャットメール” in one-byte or two-byte characters is received from a registered chat member, a message indicating that the log is updated appears and the received chat mail is added on the chat mail screen.
Page 283 Displaying broadcast addresses Broadcast addresses of received mail can be displayed. Highlight a mail on the chat mail screen ･ When a broadcast address is not registered as a chat member, Not recorded appears in the nickname field. When the mail address is registered in the phonebook, the registered name appears instead of the mail address.
Page 284 Select Text color field Select a color Press p Quitting chat mail f or c on the chat mail screen Select No Chat mail quits. The previous chat mail log is displayed next time chat mail is started. ･ When Yes is selected, all chat mail is deleted. In this case, the chat mail in Inbox or Outbox is also deleted except for protected mail.
Page 285 When the address is registered in the phonebook, the registered name is displayed in field. To send to a party that uses an overseas carrier other than DoCoMo, enter “+” (by pressing 0 ･ for over a second) and the country code plus the party’s mobile phone number. Omit the first 0 of the phone number.
Page 286 INFORMATION ● Depending on signal conditions, characters may not be displayed correctly at the receiver side. ● The font type and whether to receive the delivered report are set in SMS Setting beforehand. You can also change the settings for the delivered report and storage period in the SMS Center while composing SMS. ●...
Page 287 SMS received last. ● When SMS is received from overseas carriers other than DoCoMo, “+” is added before the sender address. If the sender address with “+” in front of it is registered in the phonebook, the name in the phonebook is displayed.
Page 288 Delivered report Keep in SMS center ：Sets the storage period of sent SMS in the SMS Center in cases the receiver cannot receive the message. ：Sets SMSC when you use SMS services other than DoCoMo. SMSC ･ When Others is set, select Address field and enter the address (up to 20 one- byte characters).
Page 289 : Sender (unable to reply) : Subject (Received SMS, Sent SMS, or Delivered report) ･ SMS Center is displayed as the sender of delivered report and DoCoMo SMS as the sender of missed call notice. ･ When sent SMS is moved or copied to the UIM, the sent date and time are cleared from the SMS in the UIM.
Page 290 Moving/copying SMS from the UIM to FOMA terminal Move or copy SMS saved on the UIM to Inbox or Outbox of FOMA terminal. ･ When you move or copy sent SMS, any corresponding delivered reports are moved or copied to Inbox together.
Page 291 i- α ppli i-αppli.......................290 Downloading i-αppli from sites..............291 Starting i-αppli ....................293 Starting i-αppli with One-key Shortcut......One-key Shortcut Starting i-αppli with Two-key Shortcut......Two-key Shortcut Automatically starting i-αppli................300 Starting i-αppli from a site or mail ........... i-αppli To Operating i-αppli Stand-by Display ....i-αppli Stand-by Display Managing i-αppli.....................302 Using various functions from i-αppli............305...
Page 292: I-Αppli
･ Register Phonebook entries ･ Use icons ppli α ･ Add bookmarks ･ Save schedules ･ Obtain images from Data Box Downloading i- ppli software from sites allows α ･ Save images in Data Box more convenient use of i-mode compatible FOMA terminal (hereinafter called as i-mode terminal).
Page 293: Downloading I-Αppli From Sites
■ i- ppli auto start α INFORMATION ppli can be automatically started at the α ● With i- ppli DX, communication may be made to α user-specified time, date, day of week, etc. Some confirm the validity of i- ppli regardless of the NW α...
Page 294 ■ ● When Software Info Display is set to ON: Mobile Wallet compatible i- ppli cannot be α ppli information is displayed. When you downloaded while IC Card Lock is on. α ● select Yes, i- ppli is downloaded. Depending on the amount of data in the IC card, α...
Page 295: Starting I-Αppli
● If received mail that supports Message i- ppli to be α : i- ppli with Auto Start α downloaded has already been saved in FOMA : i- ppli at stopped condition by IP α terminal, a confirmation screen is displayed asking (Information service provider) whether to move the received mail to the folder that : i-...
Page 296 ･ ● Images used on i- ppli or your entered data may The displayed items differ depending on α automatically be sent to the server via Internet. ppli. α ･ Images used on i- ppli are images shot with the For i- ppli downloaded from SSL pages, you α...
Page 297 ： Allow access to phonebook/call records by software Use software setting： Specifies whether to allow i- ppli to refer to The light comes on according to i- ppli. α α the phonebook or call log. If Yes is set, the phonebook or call log may be referred to Setting vibrator automatically.
Page 298 ･ If you delete i- ppli preloaded by default, you can α ｉアニメっちゃメーラー superDX500 download it from i-mode site “My D-style”. (i-anime Mailer superDX500) To access “My D-style”, You can compose 3D エフェクトメール (3D effect iMenu → c メニューリスト mail) and えほんメール...
Page 299 This is a convenient application, with no monthly ■えほんメール (Cartoon mail) subscription fee, containing a TV program table and You can send mail by an AV remote control. You can simply acquire the analog or digital composing a story using terrestrial TV program information no matter when or four frames.
Page 300 過去計算一覧表示 displayed. When you select dial. (Last calculations), up to 5 past calculations are ･ DoCoMo assumes no responsibility for the displayed. information of Edy set in FOMA terminal. ■ Useful calculations Select a calculation type from the title screen.
Page 301 カロリー計算 (Calories) ： Registering： Press o, select Calculates the total calories of food intake. 予定設定 (Set schedule), set the contents of schedule and press p. Enter the sex and age, and the calories calculation screen is displayed. ･ The number of the schedules which can be registered in a day is up to 3.
Page 302: Starting I-Αppli With One-Key Shortcut
Starting i- ppli with One-key Shortcut Automatically starting i- ppli α α One-key Shortcut Select whether to use auto starting and set Registering i- ppli to One-key Shortcut α different auto starting conditions for each i- ppli. α ･･ Date and Time Setting of FOMA terminal is Only one i- ppli can be registered.
Page 303: Starting I-Αppli From A Site Or Mail
Software： Displaying history when Auto Start of i- ppli α Specify whether to automatically start at the fails Start Failure History intervals preset for i- ppli. α If automatic start of i- ppli fails, appears on the α -α ppli 1 to 4： stand-by display and the i- ppli name, the date and α...
Page 304: Operating I-Αppli Stand-By Display
Quitting i- ppli to return to the i- ppli stand-by α α Operating i- ppli Stand-by Display α display ppli Stand-by Display α f while i- ppli is running Select End α When i- ppli is set for the stand-by display, you ppli is ended and the i- ppli stand-by display α...
Page 305 α deleted, a confirmation screen is displayed ● Some i- ppli may inquire the DoCoMo server about α asking whether to delete i- ppli other than that. α the availability depending on the length of time of use/number of times of use.
Page 306 Select Yes Sorting i- ppli α Software Sort ･ When you attempt to delete Message i- ppli, a α confirmation screen is displayed asking Default By download time whether to delete the automatically created m321 mail folder at the same time. Select Yes to delete the mail folder and all messages stored 1 to 5 in it.
Page 307: Using Various Functions From I-Αppli
Using infrared communication from i- ppli α Using various functions from i- ppli α ･ Infrared communication may not be made depending on the other device, even if it is ･ Downloading i- ppli that supports individual provided with the infrared communication function. α...
Page 308 MEMO...
Page 309 i-channel i-channel ......................308 Displaying i-channel..............Channel List Changing i-channel settings..........Ticker Setting...
Page 310 Connect i-channel You can select each channel to view detail i-channel is a service in which DoCoMo or IP information. (Information service provider) delivers graphical ･ The screens shown information such as news and weather above are for information to i-channel compatible terminals.
Page 311 Trial channel Changing the i-channel host Basic channels are available for free of service You can change the i-channel host (although you charge for a set period of time to i-mode subscribers usually do not need to change it). who use an i-channel compatible terminal, and who a d96 have never signed up for the subscriber line.
Page 312 Default Show ticker: Yes Ticker speed: Normal Select each item to set Show ticker： Select Yes or No. ･ If No is selected, Ticker speed cannot be set. Ticker speed： Select from Slow, Normal, or Fast. Press p ･ If Show ticker is set to Yes, a confirmation screen appears when video/i-motion, Chara-den or i- ppli α...
Page 313 Mobile Wallet/ToruCa Mobile Wallet....................312 Starting Mobile Wallet compatible i-αppli ............313 What’s ToruCa? ....................314 Obtaining ToruCa ....................314 Displaying ToruCa ...................315 Specifying whether to obtain ToruCa ........ ToruCa Setting Preventing use of IC card functions ........IC Card Lock...
Page 314: Mobile Wallet
Mobile Wallet holding it over a compatible reader/writer*. terminal at a DoCoMo Shop (including the case of Also, compared to a conventional contactless IC failure). The method differs for each Mobile card compatible with FeliCa, the Mobile Wallet Wallet compatible service.
Page 315: Starting Mobile Wallet Compatible I-Αppli
Starting Mobile Wallet compatible i- ppli α Select Mobile Wallet compatible i- ppli α ･ Mobile Wallet compatible i- ppli can be auto α started, deleted and its folders managed in the same way as normal i- ppli. α ■ Quitting: Quit the Mobile Wallet compatible i- ppli...
Page 316: What's Toruca
How to get ToruCa What’s ToruCa? Site ToruCa is an electronic card that is available Reader/Writer through Mobile Wallet, which can be used as a flyer, restaurant card, coupon, etc. You can obtain ToruCa from the reader/writer and sites and exchange the obtained ToruCa easily by using mail, infrared communication, and miniSD memory card.
Page 317: Displaying Toruca
･ If you download detailed information from saved ToruCa, it is not saved as another file, and the Displaying ToruCa detailed information is added in original ToruCa. Obtaining ToruCa (details) from ToruCa ☛P315 m631 Select the folder INFORMATION ･ To switch to the folder list of the miniSD ●...
Page 318 Deleting a folder Reading the folder list/ToruCa list screen ･ Deleting a folder having ToruCa also deletes the ToruCa in the folder. If the folder has any Reading the folder list screen protected ToruCa, however, the folder cannot be deleted. Delete the folder after releasing the The storage area usage protection.
Page 319: Specifying Whether To Obtain Toruca
1 to Select the search condition Highlight ToruCa ToruCa is protected and the mark changes from ･ To cancel: Highlight ToruCa Protecting multiple cards: m42 ■ Select ToruCa Protecting all: m43 ■ ･ When you select Category, select the Category ■...
Page 320: Preventing Use Of Ic Card Functions
Select each item to set INFORMATION ToruCa receive： ● Removing the battery pack automatically sets IC Specify whether to obtain ToruCa. Card Lock. To cancel IC Card Lock, attach the Lighting alert： battery pack and then turn on the power. Specify whether to make the call indicator ●...
Page 321: Managing Data
Displaying/Editing/ Managing Data Making full use of images Displaying images ............... My Picture Editing still images ..................322 Setting the operating conditions of images.... Settings (My Picture) Making full use of video/i-motion Playing video/i-motion ..............i-motion Editing video/i-motion ..................330 Setting the operating conditions of video/i-motion..Settings (i-motion) Making full use of Chara-den Chara-den ......................334...
Page 322 Making full use of images : Camera : Frame/Stamp Menu 51 : Data transfer : Chara-den Displaying images Type of image My Picture No icon: Still image You can display images saved in Image (My : Created animation : Animation/Flash movie Picture) in Data Box in FOMA terminal.
Page 323 Adding to the phonebook: 2 ■ : Pause/replay Registering entries to the phonebook ☛P107 ･ m0 : Retry (replay from the beginning) : Slow-down playback (only in stop for ■ Updating and registering to the registered phonebook: 3 playing Created animation Select phonebook : Full-screen display data...
Page 324 ･ Select images Still images not permitted to attach to mail or to output from FOMA terminal (excluding still The number is images with file restriction set with your terminal) displayed on the ･ Still images with either the vertical or horizontal image in the order of size is under 8 dots selection.
Page 325 ･ ● After editing, the file size of still images may become The portrait still image can be zoomed in larger. up to 288 x 352 and the landscape still ● When there is not enough available storage space image can be zoomed in up to 352 x 288 to save, or you have exceeded the maximum (up to the limit of the either).
Page 326 b O to adjust the position of Reversing/rotating The clipping range is set and the range 5 on the edit menu screen specification frame is displayed in solid line. Press o instead of p to change the ･ Reverse/rotate the still image position of the upper left again.
Page 327 Pasting stamps 7 on the edit menu screen The smaller size stamps than the still image being edited are listed. ･ Images set as stamp option in Edit Detail Info and stamps preset by default are displayed even if their size is larger than that of still image edited.
Page 328 O to place to the color to cut and Pasting characters Paste Text 8 on the edit menu screen The section with a similar color as the color at is cut out. Select each item to set : Enters the text (up to 40 one-byte or Text 20 two-byte characters).
Page 329 Scale up image ： Close-up : Makes appropriate adjustment for Sets whether to scale up an image smaller images such as still objects and plants. than the display area by maintaining its aspect Near view: Makes appropriate adjustment for the ratio when displaying it.
Page 330 Press o Highlight a video/i-motion file The video/i-motion is played. Data display name at the cursor and icon Thumbnail display Title display Playing status Video/i-motion list : in play Originated : in stop : Preinstalled : i-mode : in pause : Camera : Data transfer File types...
Page 331 Setting a bookmark: During playback, t ■ ■ Restriction on expiration at the position to set a bookmark Select Status Description Within Available to replay until year/month/date ･ The number of the bookmark to be set is expiration hour: minutes. Play? is displayed. To play, only one in all the video/i-motion of FOMA select Yes;...
Page 332 ･ Video/i-motion files copied/moved to FOMA terminal from the miniSD memory card Editing video/i-motion (including the case where files are copied/ moved to your terminal again after saved in the miniSD memory card) You can edit video/i-motion saved in i-motion. ･...
Page 333 ■ ■ Sending mail with the captured still image Setting the limit of clipping size: attached: a ･ This setting is available only when the The captured still image is saved in Camera original file size is larger than 290 Kbytes. a m in the screen before pressing o folder in Image (My Picture) and the mail composition screen with the still image...
Page 334 Enter the size to clip Time interval to show ： ■ Settings to the size that can be attached to Set to User specified to specify a desired mail: position to insert the ticker. ･ Specify the number of tickers when setting This setting is available only when the to Regular interval.
Page 335 ■ ■ Decorating tickers: Sending mail with video/i-motion attached: a Highlight a ticker b Select each item to set The video/i-motion with tickers is saved and the mail composition screen with video/ Ticker 1 to 10 ： i-motion attached is displayed. Displays characters entered on the ･...
Page 336 ･ If Chara-den registered by default has been INFORMATION deleted, it can be downloaded from the i-mode site In the video/i-motion list, press m and select ● “My D-style”. ☛P296 Settings. ● The setting of Repeat play, Volume and Surround is Select a folder also reflected for Player Setting of Music Player.
Page 337 c Select YES (Same size) or YES (Large size) 女の子 (Girl) ･ If the i- ppli stand-by display has already Action α been set, a confirmation screen is 喜ぶガッツポーズ (Joy) (Victory pose) displayed asking whether to cancel it 愛情怒る...
Page 338 ･ Select a folder The still image/video recorded is saved in Camera folder of Image (My Picture) or i-motion Highlight a Chara-den image when FOMA terminal is selected as the memory to save and in case the miniSD The Chara-den recording screen appears. memory card is selected as the memory to t to switch the recording types save, it is saved in My picture folder or Movie...
Page 339 Setting the operation of still image/video recording Still Image Setting/Video Setting INFORMATION ● Default If file restriction in detail information is set for ● Still Image Setting Rec.File Restriction for Chara-den, the still image/ Quality: Standard Shutter sound: Shutter sound1 video taken (except for the case with Rec.File Rec.File Restriction: File unrestricted Restriction set with your terminal) cannot be edited,...
Page 340 Press o Mail Attach Melody ： Melodies for attaching to mail, which are The melody is played. preset by default Play bar Data transfer ： Indicates the Melodies read by Bar Code Reader, melodies current play moved/copied from the miniSD memory card position.
Page 341 ･ The miniSD memory card is not included in the bundle. If you have no miniSD memory card, you Select each item to set can purchase it at electric appliance stores. ･ Unformatted miniSD memory cards must be Volume ： formatted with FOMA terminal before they can be Sets the volume in playing melodies.
Page 342 ･ It is recommended that the data saved in the Received miniSD memory card be separately backed up for message storage. DoCoMo assumes no responsibility for Unsent accidentally erased or changed data. message Sent message Using with devices supporting the SD memory...
Page 343 16 alphanumeric characters from 0 to 9 and A SD_VIDEO * ２ to F.) MOLzzz.3GP/MP4/ASF PRLzzz PRIVATE ･ 0001 to 9999 are placed in xxxx of STILxxxx DOCOMO and RINGxxxx. STILL * ３ STILxxxx.JPG/GIF ･ 001 to 999 are placed in xxx of SUDxxx, SUDxxx STILxxxx.JPG/GIF...
Page 344 Operation Mail Contents Inserting/removing the miniSD memory attachment display card Data Still image in 500 Kbytes 2.6 Mbytes ･ Turn the power off before inserting/removing the JPEG format Unlimited 1728 x 2304 miniSD memory card. Still image in GIF 10,000 bytes 2.6 Mbytes ･...
Page 345 ● If free capacity of the miniSD memory card is insufficient, data may not be saved. Save data after Exchanging the data between FOMA deleting unnecessary data or attaching another terminal and the miniSD memory card miniSD memory card. You can copy/move data between FOMA terminal Copying/moving data from FOMA terminal to the and the miniSD memory card and back up FOMA miniSD memory card...
Page 346 ● Select the type of the data In the received mail list, sent mail list or unsent mail list, press m and select Move/Copy → Copy to Copying/moving data in Data Box: 1 ■ miniSD → One item. 1 to 4 In the bookmark list, press m and select Move/Copy ●...
Page 347 m652 1 to 7 Enter the terminal security code Select To cancel the recovery: o ･･ Backup data processed before canceling are Enter the terminal security code Select restored in FOMA terminal. The selected PIM data is backed up to the miniSD memory card as one data item integrated.
Page 348 ■ Deleting selected items: a m42 for data in Data Box and Displaying the PIM data m32 for PDF data/ToruCa m652 Select data 1 to 7 Select Yes ■ Deleting all items: Select data a m43 for data in Data Box and m33 for PDF data/ToruCa ■...
Page 349 ･ ● Select the mail address in the mail view screen, press If information update is performed, the display m31 to register the mail address to the name of data is changed as follows: phonebook, or press m32 to register the ･...
Page 350 Managing various data Example Moving data in Image (My Picture) Using the album Select a folder m511 Select data You can create albums (folders) in Image (My ■ Moving selected items: Picture), i-motion, Melody, Chara-den or My a m512 Select data Documents in Data Box in FOMA terminal and sort Each time you press t, thumbnail ･...
Page 351 Select an album INFORMATION In the video/i-motion list, press m and select Move/ ･ The following operations are available while the ● video/i-motion album is played: Copy → Return to folder → One item, Selected items or o: Pause/replay %: Adjust volume All items.
Page 352 File restriction： Classification whether your data can be moved When you send data to the other mobile phones at a DoCoMo’s designated repair office when via mail attachment, you can set whether to your FOMA terminal is repaired restrict sending data to the other mobile phones ･...
Page 353 ● In the case where Chara-den registered by default INFORMATION has been deleted, you can download it from the ● Even if Yes is set for Use as frame or Use as stamp in i-mode site “My D-style”. ☛P296 the image detail information, images are saved in the original folder and are not displayed in Item folder.
Page 354 ･ The infrared communication function of this terminal conforms to IrMC 1.1. Sending data by infrared communication ･ Even if the terminal of the other party conforms to Send Ir Data IrMC 1.1, some data may not be sent/received depending on the data type. You can send data by selecting each item to send ･...
Page 355 m621 Data type Remarks ･ ToruCa Data is sent as the state before Select the data type Enter the terminal obtaining ToruCa (details). ToruCa (details) can be obtained again with security code the destination terminal. ･ Enter the 4-digit authentication password In case the size exceeds 321 bytes, ToruCa cannot be sent (it may vary The entered authentication password is masked...
Page 356 Data type Storage after receiving Receiving all data items PDF data Data transfer folder of My Documents You can receive all the data of phonebook, schedule, ToruCa ToruCa folder of ToruCa list mail, note and bookmark via infrared communication. Own Number Phonebook ･...
Page 357 ● ToDo data (a list function data to manage business) Saving received data cannot be saved on D902i. When receiving all items of ToDo data and schedule data at once from the model You can save data stored in INBOX temporarily to other than D902i, only the schedule data is saved.
Page 358 ･ This function is unavailable during Self Mode is Ph. book image sending： on or infrared communication is executed. Specifies whether to send images saved in ･ Communication may be influenced by the model the phonebook along with the all phonebook data.
Page 359 ■ Recording time of sounds that can be stored Counter in the miniSD memory card (estimates) During stand-by for recording File size restrictions Indicates the approximate maximum recording Capacity Quality time of sounds that can be saved in FOMA Msg attach: Msg attach: None Small...
Page 360 p or C ･ After saving the sound, the memory to save returns to the setting before switching. The shutter sound is heard and recording is finished. A confirmation screen for the recorded ■ Displaying the saved sounds in the list: 1 or 2 sound is displayed.
Page 361 % to switch the icon Select the PDF data ： Msg attachment (S)* Restricts the file size to 290 Kbytes. Being attached to i-mode Mail, data of this file size can be sent to the terminal unsupporting large capacity messages. Msg attachment (L)* ：...
Page 362 ･ The rest of the data may not be downloaded depending on the PDF data. ･ In case a style that is not compatible with PDF compatible viewer or complicated design is contained in PDF data, the data may not be displayed correctly.
Page 363 Rotating the display: m64 1 to b Select each item to set ■ Display properties：･ The rotation of 90 degrees to right/left and 180 Sets whether to display the page No./total degrees is available. number of pages and display ･...
Page 364 ■ Deleting one item: INFORMATION a Select the bookmark ● PDF data saved in the miniSD memory card via PC, b Select Yes etc. can be displayed on FOMA terminal as well. ･ ■ For details about the storage and file name of PDF Deleting selected items: a m22 data in the miniSD memory card ☛P340...
Page 365 By default, when starting Music Player, the folder/ ● If PDF data is moved to PC and so on via the file under the top folder (PRIVATE → DOCOMO miniSD memory card, etc., marks may be deleted. → MMFILE → D_MUSIC folder of the miniSD memory card) is listed.
Page 366 ･ During playback, the following operations are Operation Procedure enabled: Activate Music Player Press for over : Stop（Press o again to replay from a second interrupted position） Play/Stop/Select a folder Press once & : Adjust volume Select the next music data or Press twice in : Play the previous/next music data folder*...
Page 367 Other Convenient Functions Multiaccess ................Multiaccess Multitask ..................Multitask Having an edit screen displayed when FOMA terminal is opened ....................Edit by Slide Turning power on/off automatically at the specified time ..................Auto Power ON/OFF Ringing alarms at set time ............Alarm Clock Setting to turn power on automatically at the time specified for the alarm ...................
Page 368 A voice call is received during i-mode Multiaccess ･ The screen Multiaccess displayed when a voice call is received Multiaccess is a function that 3 functions (the depends on Priority voice call, packet communication, SMS) can be Comm Mode. used at the same time. ･...
Page 369 Multitask When transmission of Multitask i-mode Mail is completed, the talking Multitask allows you to execute several functions screen returns. at the same time and perform operations by switching the screen. ･ The icons for the functions in progress are displayed on the task bar.
Page 370 Switching functions to operate Quitting all running operations Pressing b while you are using multiple functions, You can quit all functions running in Multitask at a Switch Task menu appears, which allows you to time. switch screens and perform your desired operation. bp during Multitask Select Yes Example...
Page 371 ● Set Auto Power ON to OFF in areas where mobile INFORMATION phone use is prohibited, such as in hospitals, ● If Schedule is set to ON, the edit screen is displayed medical facilities and airplanes. by opening FOMA terminal when the schedule details screen is displayed.
Page 372 Title： Up to 14 one-byte or 7 two-byte characters can be entered. ･アラーム1 アラーム The titles are set to by default. If the title field is not entered, the alarm cannot be set. & to switch to Set sound screen Select and set each item Pressing f while the alarm is sounding finishes ･...
Page 373 p (for over a second) INFORMATION ● When multiple alarms are set for the same time, the Current day is alarm set for the smallest item number in the alarm displayed in pink, Saturday in blue, and list is activated. day-off and national ●...
Page 374 Setting display style for the calendar ･ If you register the calendar display Calendar View Mode without selecting days off, it returns to the default state. Default Scroll mode: Monthly mode Display mode: Normal mode Setting national holidays p (for over a second) Holiday Setting Holidays can be changed and up to 5 new entries can Select each item to set...
Page 375 Select each item to set Select <Select member list> Select members to register ･ Up to 5 members can be registered. You can make a call or PushTalk call, and also can send mail. ･ The first phone number, mail address, URL in the phonebook data is registered.
Page 376 ● To change the schedule alarm screen, you can Repeat： select a video/i-motion for Alarm or Alarm in advance Select the repeat setting for a schedule. in Set alarm screen or select an image for Image in ･ When you set a 31st day or February 29 in Other settings screen.
Page 377 ･ Select the schedule to check When the set time arrives during data transmission/reception (except packet communications) or while making, receiving or disconnecting a call/PushTalk call, the alarm operates after finishing those operation ends. However, if the schedule data is received by data communication, it does not operate.
Page 378 m821 ○ : Available × : Unavailable Sending type Send Send selected selected day/ item Send all*1 Screen Calendar screen × ○ Day view screen ○ ○ Details screen ○ × *1 Sends all saved schedules (including past schedules). ･ Schedules are entered to a mail message in the To display sent mail: m822 Date To format.
Page 379 INFORMATION INFORMATION On the calendar screen, press m, select Delete and ● ● To use the second or subsequent phone number and mail address registered in the phonebook data, then select One day/Before date/Delete all. On the details screen, press m and select Delete select a member from the member list screen to ●...
Page 380 Creating the custom menu Registering often-used functions Use the template to create your custom menu. Custom Menu ･ Up to 9 icons can be registered in a level of In addition to the normal menu displayed by Custom Menu. default by pressing m, you can create your Read a template sample original menu (Custom Menu) by registering the functions you often use and the phonebook data...
Page 381 b Highlight the menu item to register Select the item Function Group Edit by slide is Person (Making a call stored or checking detail information is available.) ･ A menu item without submenus that does ･ To select a function or person from a group: not have a lower level can be registered Select the group Select the functions and...
Page 382 Menu 48 INFORMATION Registering your own name and mail ● If Secret Attribute is set for a person in the address phonebook, the name of the person is displayed as Own Number ＊＊＊ “ ” unless Secret Mode is set. is displayed.
Page 383 Recording voice or image of the other party Displaying Own Number details while talking Only the voice of the other party is recorded during a voice call. During video-phone call, the image of the Enter the terminal security code other party is also recorded. C (for over a second) during a call Recording starts.
Page 384 FOMA terminal. If the reason for no caller ID. Stand-by Voice Memo data should be erased, DoCoMo assumes no Phone number of the other party (Voice memo is responsibility for the loss of any data.
Page 385 Total voice calls： The total duration of voice calls made Reset the call cost automatically Total videophone calls： Reset Call Cost The total duration of video-phone calls made Total data sessions： Total call cost is set to zero automatically on the The total duration of data communication 1st day of each month.
Page 386 Limit： Set the maximum amount of call cost (10 - Using Calculator 100,000 yen. 10 yen unit). Calculator Alert method： Select the alarm with icon, or the icon only. You can perform addition, subtraction, Alarm sound： multiplication and division ( ＋...
Page 387 Checking notes Composing notes Notepad Select a note to check ･ Notes can be recorded up to 50 items. Select <New note> ･ If the note data contains phone numbers, mail addresses and URLs, Phone To (AV Phone To), ･ When Notepad is set to ON in Edit by Slide, Mail To and Web To functions can be used.
Page 388 ･ Do not wrap the cord of the flat type earphone/ Date To format microphone set with switch around FOMA terminal. Date To is effective when the entry of note has a Reception level of radio waves may deteriorate. string in the format below. All items are requisite. ･...
Page 389 ･ This function does not work in Public mode INFORMATION (Driving mode). ● If you receive a video-phone call, a substitute image Receiving PushTalk call automatically ☛P102 ･ set in the substitute image setting of Image Setting will be sent. Default OFF ●...
Page 390 Manual select： Resetting functions Determines a service provider. Reset ･ A service provider other than DoCoMo cannot be selected for manual selection This resets functions to their default settings. (as of October 2005). ･ For the functions to be returned to the default ･...
Page 391 ･ The functions to be returned to the default by INFORMATION Reset* and the following functions return to the ● If you reset i-mode Setting, i-channel information will default: not be displayed in a ticker in the stand-by display. ･･...
Page 392 MEMO...
Page 393: Network Services
Network Services Network services available using FOMA terminal ..Network Service Using Voice Mail Service ............Voice Mail Using Call Waiting Service ............. Call Waiting Using Call Forwarding Service ......... Call Forwarding Using Nuisance Call Blocking Service ....Nuisance Call Blocking Using Caller ID Request Service ........
Page 394 ･ When new network services are provided by Service is automatically disabled. (After that, if you turn Call Forwarding Service off, Voice Mail DoCoMo, you can register them on the menu list. ☛P401 Service is not automatically activated.) ･･...
Page 395 ● When a new call arrives while you are talking (or ･ When there is a video-phone call even if the using packet communication), you can choose to Voice Mail service is active, the call is transfer the call to the Voice Mail Service Center. disconnected after elapsing the ringing time set Forwarding the incoming call manually ☛P61 in Voice Mail Service without connecting it to the...
Page 396 ･ If any message is found as a result of Check Deactivating Missed Call Notice Messages, the vibrator is activated according to m9132 Select Yes Vibrator Setting. ･ While turning Silent Mode on, even if Vibrator Checking current settings Setting is off, the vibrator is activated according to m9133 Vibrator Setting.
Page 397 Deactivating Call Waiting Service Your current call is automatically put on hold m922 Select Yes and you can begin talking to the other party you called. ･ Multi connecting appears on the screen. To switch the other parties: t Checking current settings ･...
Page 398 Call Forwarding Service can be operated from several phone numbers is selected, touch-tone general subscriber phones, select a phone number where you want payphones, or DoCoMo mobile phones using to forward to. b Select the forwarding destination phone the network security code. Set Remote Control beforehand.
Page 399 ● International phone calls may not be registered on such as missed calls, etc. cannot be registered. the nuisance call list. Next * From January 2001, the DoCoMo display beeper name has changed to “QUICKCAST”.
Page 400 ● When there is an incoming voice call from a number Checking current settings on the nuisance call list, no ring tone sounds and the m963 call is not recorded on the received call history. And Select Yes when there is an incoming video-phone call from a number on the nuisance call list, the video guidance INFORMATION is sent to the caller to indicate that the connection is...
Page 401 Enter the network security code Checking current settings Using Service Dialing Number m9952 Select Yes Service Dialing Number Calls are made to DoCoMo for Repairs or INFORMATION DoCoMo for General Inquiries. ● The mova terminal is available for the current FOMA ･...
Page 402 Service and Call Forwarding Service from touch- tone general subscriber phones, payphones, or Answer： You can respond an incoming call or DoCoMo mobile phones. forward it to Voice Mail Service Center or to the forwarding destination registered in Activating Remote Control Call Forwarding Service.
Page 403 Number is used. Registering new network services Added Service (Register USSD) When a new network service is provided by DoCoMo, you use the service by registering it in the menu. Select Yes ･ Up to 10 services can be registered.
Page 404 ■ Changing registered contents: Select a number that is already in use Select USSD code field Enter the USSD code provided by DoCoMo Select Reply message field Enter the message (up to 20 one-byte or 10 two-byte characters) Press p...
Page 405 Data Communication Data communication ..................404 Flow of setup for data communication ............405 Connecting PC to FOMA terminal ..............406 Installation of the communication configuration file (driver) .....407 Communicating using FOMA PC configuration software ......408 Communicating without using FOMA PC configuration software .....418 AT command ....................427...
Page 406 Packet communication charges are based on the connection with Internet immediately. For details amount of data sent and received, which make it such as charges, visit the DoCoMo web site. suitable for high-speed exchange of relatively small amounts of data such as sending and Setting dialup connection (provider, etc.)
Page 407 To view “FirstPassManual” (PDF format), Adobe ● W-TCP Reader (version 6.0 or later recommended) is A TCP parameter designed to fully utilize TCP/IP required. If Adobe Reader is not installed in your PC, transmission capacity during packet communications in you can download the latest version from the Adobe a FOMA network.
Page 408 FOMA terminal is operated from operating environments. Furthermore, operation will a PC. not be guaranteed in an environment other than that described above and DoCoMo assumes no Select Yes responsibility for pertaining to operation under such conditions. INFORMATION ●...
Page 409 名前 (Name) Click OK Click はい (Yes) A screen requesting to connect FOMA D902i to a PC is displayed. USB connector Connect FOMA terminal to a PC A progress screen for installation is displayed Connector and automatically completed.
Page 410 システムのプロパティ (System properties) screen is displayed. INFORMATION ■ For Windows 2000, Me, 98: ● When the installation fails or FOMA D902i USB is not a Click スタート設定コント (Setting) and displayed on the screen of Step 1, insert the ロールパネル...
Page 411 次へ ■ Easy setup Click (Next) Creating a dialup connection for FOMA data FOMA PC configuration software license communication and W-TCP setup can be agreement appears. performed automatically by following the instructions in the guide. Read the content of the screen and click ■...
Page 412 キャンセルいいえ『』への接続 ● Select (mopera U When (No) is clicked during mopera U installation, follow the instruction shown on the 『』への接続 connection) or mopera はいいいえ screen and click 次へ (mopera connection) Click ･ mopera U is an optional service to be charged Setting packet communication by easy setup requiring subscription.
Page 413 Using other providers Using mopera U / mopera ☛P410 ･ Perform Steps 1 to 4 of “Using mopera U / mopera” of “Setting packet communication by easy setup” ☛P410 ･その他 Select (Others) in Step 3 for the dialup connection. Check that 最適化を行う...
Page 414 b Enter a dialup connection name (APN), which 最適化を行う Check that is selected and supports the FOMA packet communication of 次へ click 接続先 your provider, in the (APN) (Dialup This optimizes the W-TCP setup required for connection (APN)) correctly Click OK packet communication.
Page 415 次へ･ The following characters (one-byte) cannot be entered: ￥ / : ＊ ? ! <> ｜” ･モデムの選 Check that FOMA D902i is set for 択 (Modem selection). Click OK Performing communication ☛P414 ･ Using other providers Using mopera U / mopera ☛P413 ･...
Page 416 Set each item Click Check the settings and click ･ Register the following items: ･接続名 : Optional ･モデムの選択 : FOMA D902i ･電話番号 (Phone number): Enter based on provider information. Click OK Performing communication ☛P414 ･ Performing communication ■...
Page 417 切断 Establish a connection Click (Disconnect) ･ When mopera U / mopera is selected, the entry ユーザー名パスワード is not required. ･ If required by the instructions of a subscribed provider, enter the user name and the ダイヤル接続 password, and then click for Me or 98) according to the input instruction information.
Page 418 ■ When the system has been optimized: 設定ソフト接続 Start FOMA PC Click The following screen is displayed. Make the ☛P410 先設定 (APN) required settings if changes are to be made. 端末設定取得 screen is displayed. FOMA Click OK FOMA terminal is accessed for reading the dialup connection (APN) information registered.
Page 419 カウント・パスワードの設定 (Set 削除 icon account and password) d Enter the user name in ユーザー名設定ソフ Select NTT DoCoMo FOMA PC パスワード the password in Click OK ト (NTT DoCoMo FOMA PC configuration ･ Not required for mopera U / mopera.
Page 420 Set to show/hide caller ID ☛P419 (Set as required.) Enter a fictional phone number (such as 0) for 電話番号接続 , select FOMA D902i from Other settings (AT commands) ☛P427 方法 (Connection procedure) Click OK (Set as required.)
Page 421 ･ Enter the dialup connection (APN) Press The dialup connection settings can be considered as phonebook registration for packet communication. The comparison between dialup ･ Enter in the format “AT + CGDCONT =<cid>, connection settings and the FOMA terminal “PPP”, “APN””. phonebook is as follows: <cid>...
Page 422 モデムー Select FOMA D902i (COMx)* Setting made by 次 (Modem: FOMA D902i (COMx)) Click AT ＊ DGPIR へ command Not set Hide Show *1 COMx varies by PC to be used. Dialup network ･モデム− Check that only FOMA D902i (COMx) setting (<cid>=1)
Page 423 ･ When multiple modems are installed to the PC, Click 設定モデムー接続 select FOMA D902i (COMx)* 方法 Uncheck ( ) all items and click OK *1 COMx varies by PC to be used. ･モデム− The dialup connection properties screen...
Page 424 The Internet account connection information screen is displayed. 所在地情報 (Location information) screen is ･ If FOMA D902i is not set, set FOMA D902i. displayed. ･ This screen is displayed for the first time you Enter the number of dialup connection 新しい接続の作成...
Page 425 接続接続名 Set each item in tab as shown below Enter any connection name in 次へ Click いいえ次へ Select Click Click アドレス (Address) tab Set each item as shown below 完了 Click ネットワークとダイヤルアップ接続 screen reappears. Click OK Setting TCP/IP protocol The Internet account connection information Select the created dialup connection icon screen reappears.
Page 426 Enter any connection name in IP) for component. 次へ Click ･モデムの選 Check that FOMA D902i is set for 択 . If it is not set, set FOMA D902i. Enter the dialup connection number (one- byte) Click 次へ ■ For packet communication: 設定...
Page 427 全般 Check the setting of each item in ･市外局番とダイヤルのプロパ Uncheck ( ティを使う (Use area code and dial properties). ･接続方法 Check that FOMA D902i is set for . If it is not set, set FOMA D902i.
Page 428 Double-click the dialup connection icon Setting for Windows 98 ダイヤル Check each item and click (Dial) Setting dialup connection ･ Under the Windows Me and 98, check each 接続 item and click The operation procedures are the same as for ･...
Page 429 Switching between the online data mode and AT command online command mode To switch FOMA terminal from the online data mode to online command mode, you can use either one of AT commands are commands for setting FOMA the following procedures: terminal functions using a PC.
Page 430: At Command List
･ AT command that can be used via the FOMA D902i Modem Port is described in this list. : Entering AT & F command restores the default setting. : Stores the command setting into FOMA terminal with the AT&W command and restores it with the ATZ command.
Page 431 Command Description & Parameter AT ＊ DGPIR = n Specifies whether to notify the caller ID for packet communication. This specification is effective both for incoming and outgoing calls. n = 0: The APN is used as is when a packet communication is established. (default) n = 1: Adds “184”...
Page 432 Enter Display None Test None ATI [n] Shows the identification code. n = 0:Shows “NTT DoCoMo”. (when parameter omitted) n = 1:Shows FOMA terminal name. n = 2:Shows the version of FOMA terminal. ex. Enter ATI0 Display None Test None Switched the mode from the online command to the online data.
Page 433 Command Description & Parameter ATX [n] Specifies whether to detect busy tone and dial tone, and whether to display the communication speed. n = 0: Busy tone not detected, dial tone not detected, communication speed not displayed. (when parameter omitted) n = 1: Busy tone not detected, dial tone not detected, communication speed displayed.
Page 434 No UIM (FOMA card) is set kbps) is set for both upload and download traffic inserted between FOMA terminal and the base station. If Other than DoCoMo SIM (IC card the parameter is set to “None (default)”, all wrong equivalent to UIM) is inserted speeds are permissible.
Page 435 Operation performed when parameter is omitted Result codes AT + CGEQMIN = Clears all <cid> settings. ■ Result codes AT + CGEQMIN = <cid> Text display Meaning Returns the specified <cid> to the default setting. Operation performed normally AT + CGEQMIN = ？ CONNECT Terminal connected to remote Displays a list of assignable values.
Page 436 ■ Communication protocol result code No. Text display Meaning PPPoverUD Connected via 64K data communication AV32K AV (video-phone) connected via [32K] AV64K AV (video-phone) connected via [64K] PACKET Connected with packet communication ■ Display example of result codes When “ATX 0” is set Regardless of the settings of the AT￥V command (☛P431), only CONNECT is displayed upon completion of connection.
Page 437: Character Entry
Character Entry Entering characters ..................436 Entering characters using 5-touch Input Method ..................5-touch Input Method Registering fixed phrases............Save Phrase Copying/cutting and pasting characters ......Copy Character Entering characters using codes ......... KUTEN Code Input Registering frequently used words........... Save Word Entering characters using Slot Input Method ....
Page 438 Full-screen entry Entering characters Highlight the entry field and press o to display the full-screen entry area. Input mode FOMA terminal has many functions such as the phonebook and mail that require entering Available entry area (icon shows no further characters.
Page 439 Phrase : Enters fixed phrases ☛P439 Changing input modes KUTEN : Uses KUTEN code to enter characters ☛P442 ･ The available input modes are different depending on the character entry screen. Using to change modes The input modes change each time n is pressed as Entering characters using 5-touch Input follows: Method...
Page 440 ■ ■ Returning to the previous character: Deleting characters: Pressing a immediately after entering a ･ When the cursor is inside an entered character brings back to the previous character string character. The character appears in the 一 (Example: 鈴木郎...
Page 441 O to highlight an option Example Entering “動物園に行こう。 ” Enter characters Fix all characters: m ■ Fix converted portion: o ■ ･ While the cursor is placed in predict conversion Change conversion range: & ■ options, the following operations are enabled: t/a: Switches to the previous/next page When pressing l p : Enables Kana/Kanji Conversion (Predict...
Page 442 INFORMATION INFORMATION ● Face marks can be entered by entering “かおもじ” ● A part of symbols can be converted by entering in kana/kanji mode. readings in kana/kanji mode. ● Mail using face marks may become deformed, look Readings Symbols you can enter different or cannot be correctly displayed depending Greek characters ぎりしあ...
Page 443 ･ To edit the registered fixed phrase: Select a Quoting Own Number entry fixed phrase to edit. ･ The Own Number is unable to be quoted on the ･ To check the registered fixed phrase: Highlight a character entry screen of Own Number. fixed phrase You can edit by pressing o.
Page 444 ● When 50 fixed phrases have already been INFORMATION registered, the list of registered fixed phrases is ● When the type of the copied/cut characters does not displayed. To register a new item, you must either match with the character type used in the destination delete a phrase from this list or edit a registered field, pasting is disabled.
Page 445 Select Word field Enter the word to INFORMATION register (up to 24 one-byte or 12 two-byte ● Readings that contain characters other than characters) hiragana, prolonged sound, voiced or semi-voiced sound characters cannot be registered. ● When the following characters are the initial part of the reading, it cannot be registered.
Page 446 ･ Even when Slot Input Method is set, 5-touch input screen will appear during in-line entry. You can Setting input method operate in Slot Input Method when entering in full- Input Method Setting screen of entry area. ･ When you are using the slot input board and want Default Input method: 5-touch Input prediction: ON to use the entry area (for deleting characters, Auto cursor: Normal...
Page 447 Appendix/Data Interchange/ Troubleshooting Menu list ......................446 List of dial keys and character assignments (5-touch Input Method) ..451 List of input slots and character assignments (Slot Input Method) ..451 List of fixed phrases ..................452 List of symbols ....................454 List of pictograms ...................454 KUTEN code input list ..................457 Combination of operations during Multiaccess ..........461 Combination of functions during Multitask ..........463...
Page 448: Menu List
Delivered report: g Message R&F Do not reguest a Message R Keep in SMS center: 3 days P285 P218 ー SMSC: DoCoMo b Message F P218 ー Address: 81903101652 c Message settings Type of Number: international a Auto-display MessageR preferred...
Page 449 Ph.book image sending: g Certificate d USB mode Communication mode a Set CA Certificate 1 to 9 P406 P220 settings certificate* DoCoMo Cert1 c ToruCa b Certificate P221 ー a ToruCa list P315 ー download b ToruCa settings ToruCa receive, Lighting...
Page 450 Menu item Default Page Menu item Default Page b Display b Display a Stand-by f Alert lighting Indicator light, During call: a Select Use Style Theme setting P132 Incoming Videophone, img/i- ppli α Incoming call: Flash/ b Set calendar P136 ー...
Page 451 Menu item Default Page Menu item Default Page d Info/Reset g Videophone e Reset a Videophone P388 Display image: Default ー P139 f Delete all data P389 dialing ー b Incoming e Clock Ring alert: Melody/ 電話・メロディA(Phone, melody A) Videophone a Date &...
Page 452 iNW Services Menu item Default Page i Others Menu item Default Page a Register USSD ー P401 a Voice Mail b Record reply message ー P402 a Voice Mail service c Remote control a Activate ー P393 a Activate ー P400 b Set ring time ー...
Page 453: List Of Dial Keys And Character Assignments (5-Touch Input Method)
J K L j k l 5 ななにぬねの 5 ﾅﾅﾆﾇﾈﾉ 5 ﾞﾟﾞﾟﾞﾞﾟ定 @docomo.ne.jp .com .or.jp .go.jp .ne.jp .co.jp .ac.jp ははひふへほ 6 ﾊﾊﾋﾌﾍﾎ 6 http://www. www. .html .htm ままみむめも 7 ﾏ...
Page 454: List Of Fixed Phrases
List of fixed phrases ･ Face mark 1 (72 items) ･ Face mark 2 (28 items) ･ Common (20 items) おはようおやすみおはよー！今日も一日がんばりましょう。昨日は、とっても楽しかったです。どうもありがとう。連絡下さい。今から電話してもいいですか？ごめんなさい、遅れます。今日は○○の日です。早く帰って来てね。 ○○まで迎えに来て！お願いします。 ○○について知っている人は○○までに○○に教えて下さい。もう少し待ってて！いってらっしゃい。留守電にメッセージをお願いします。 ○○で待ってます。ただいま電話にでることができません。メールでご用件をお知らせ下さい。集合時間は○○、集合場所は○○です。今日は外で食べて帰ります。ご飯はいりません。...
Page 455 今度みんなで○○へ行きましょう。○○までで、都合の良い日を教えて下さい。今度みんなで○○へ行きましょう。いいところがありましたら、お知らせ下さい。 ○○しませんか？日時：○○、場所：○○。出欠をご連絡下さい。メッセージ下さい！！ ○○の時の写真だよ。･ Business (20 items) 本日の○○会議は、○○となりました。本日の○○訪問は、○○となりました。 ○○へ直行します。 ○○へ直帰します。電車遅延のため、○○遅れます。至急 TEL 下さい。予定変更！ TEL 下さい。待ち合わせ変更！場所：○○、時間：○○ ○○頃まで、携帯電話の電源を切ります。振込口座：○○銀行○○支店、口座番号○○、名義人名○○です。 ○○の件、よろしくお願い致します。今日、一杯どうですか？連絡下さい。 FAX 確認願います。次の指示を待て。変更します。延期します。中止します。 ○○での写真送ります。今わかりません。あとで連絡します。･ Answer (20 items) Thank you! Good! OK です。...
Page 456: List Of Symbols
List of symbols One- □ byte □ Two- byte : Indicates blank space (one-byte/two-byte). □ ･ Some symbols above may look different from the displayed ones. List of pictograms Entering the readings in hiragana/kanji mode allows to convert it. ･ Entering “...
Page 457 Readings Readings Readings Pictogram Pictogram Pictogram くらぶくろーばーちけっときっぷはんげつつきとらんぷすぽーつしゃつみかづきつきでんしゃのりものやきゅうすぽーつまんげつつきてつどうぼーるでんわけいたいでんわちかてつのりものごるふすぽーつけいたいけーたいしんかんせんのりものてにすすぽーつめーるくるまのりものさっかーすぽーつぼーるふぁっくすじどうしゃすきーすぽーつあいもーどくるまのりものばすけっとぼーるばすけあいもーどじどうしゃばすけっとすぽーつどこもばすくるまのりものもーたーすぽーつふらっぐどこもふねのりものはたすぽーつ...
Page 458 Pictogram 2 Readings Readings Readings Pictogram Pictogram Pictogram じてんしゃのりものぱんなみうみれんちこうぐしゅうりどんぶりらーめんふじさんやまぱそこんぴーしーゆのみおちゃすのぼすのーぼーどえんぴつとっくりにほんしゅさけはしるひとだっしゅくりっぷわいんぐらすわいんさけうーんかおさゆうやじるしばななくだものほっにこかおじょうげやじるしりんごくだものあせかおりさいくるさくらんぼくだものあせかおえぬじーくろーばーよつばはむっむかかおはっぱまるひひみつぼけかおちゅーりっぷはなきんしはーとかお...
Page 459: Kuten Code Input List
KUTEN code input list ･ Some of the following may look different from the displayed ones. 1st to 3rd 1st to 3rd 1st to 3rd 4th digit figure of the JIS Kanji code 4th digit figure of the JIS Kanji code 4th digit figure of the JIS Kanji code digit digit...
Page 460 1st to 3rd 1st to 3rd 1st to 3rd 4th digit figure of the JIS Kanji code 4th digit figure of the JIS Kanji code 4th digit figure of the JIS Kanji code digit digit digit...
Page 461 1st to 3rd 1st to 3rd 1st to 3rd 4th digit figure of the JIS Kanji code 4th digit figure of the JIS Kanji code 4th digit figure of the JIS Kanji code digit digit digit Next...
Page 462 Note: The miniSD memory card is not included in the bundle and needs to be purchased. ☛P339...
Page 463: Combination Of Operations During Multiaccess
Combination of operations during Multiaccess The following table shows whether or not a process that is generated or to be performed can be operated when any other operation is in progress: 〇 : Another communication is available maintaining the current communication status. ×...
Page 464 Processes that occur Data or are performed Packet 64K data transmission communication communication (infrared communication) Current status Send Receive Send Receive Send Receive Send Receive During a voice call ○ * × * ○ ○ ○ × × × During a video-phone ○...
Page 465: Combination Of Functions During Multitask
Combination of functions during Multitask Whether or not selections made in New Task menu can be combined with the currently run or set function is described in the following table: ○ : can be selected × : cannot be selected a Mail bi- mode New Task menu...
Page 466 ○ : can be selected × : cannot be selected d Phonebook & Logs e Data Box f Tools g Stationery 0 New Task menu item a b c d e Ans. machine/ f a b c d e a b c d e f a b c V.
Page 467: Services Available For Foma Terminal
*2 FOMA In-Car Hands-Free Cable 01 is required to connect to FOMA D902i. make the call and do not turn off the phone after the call, but keep it on for about 10 minutes.
Page 468: About The Data Link Software
Contact information for technical matters About the data link software concerning the data link software Mitsubishi Electric Data Link Support Center: 03-5319-3762 The FOMA D Series Data Link Software can be Business hours: used to transfer data such as Bookmark between weekdays 9:00 to 12:00/13:00 to 17:00 (Closed on your FOMA terminal and a connected PC.
Page 469 PCs. ･･ For details including the operating environment, Please note that DoCoMo assumes no downloading procedure and operation responsibility for coping with the cases of instructions, visit the website shown above. handling with CCCD (Copy Control CD) or where sound data cannot be converted to AAC format.
Page 470: Troubleshooting
･ In case that characters that cannot be The music data is stored in the miniSD memory registered are included in the display name or card. A confirmation screen appears when file name, completed. ･ a confirmation screen is displayed asking The miniSD memory card is recognized as a whether to change into the name that can be removable disk.
Page 471 ●When there is an incoming call, a ring alert Phone not set sounds. ･ Ring tones set in multiple functions sound depending on ●“Please wait.” is displayed and does not go the priority levels given below: out. aIncoming settings for Multi Number ･...
Page 472 ●Nothing is indicated on the display. ●Mail reception is announced by other ring Is Turn light on in Display Light Setting set to other than alert than that set for incoming mail. ･ Always? Screen display disappears after about 90 When the mail ring alert is set for multiple functions, the seconds have elapsed without any operation.
Page 473: Example Of Error Messages
Example of Error messages Error Message Main error messages displayed on FOMA terminal are shown in the alphabetical order as follows: ･ The “(number)” or “XXX” in error messages is a code used to distinguish the error sent from i-mode Center.
Page 474 ●Data transmission is frequent. ●Error occurred. Unable to ●Failed to save. ･ Continue transmission? save. Cannot be saved because the still Displayed in case the number of Cannot be saved because an error image above 10,000 byte to be transmission is extremely large occurred during saving attachment.
Page 475 ●Incoming message data ●Invalid content download ●Mail address not recorded. damaged. Restore default failed The mail address is not saved in the settings? Cannot download because the object selected mail group. Save the mail address in the mail group. ☛P273 The received data of chat mail contents to be charged are invalid.
Page 476 ☛P484 ●No UIM, requested software ●PUK blocked. ●No content is available. (204) failed to start. Inquire at DoCoMo Shops. Could not find data at the specified The i- ppli to be used together with α site.
Page 477 ●Receiving messages. Retry ●Save unsaved data to phone ●SSL session was terminated. later. Message receiving. memory or delete. Some problem is detected with the Try again later. Infrared communications cannot site certificate during SSL i-channel cannot be activated during end, leaving data saved in INBOX communication.
Page 478 ●This software is currently ●Unable to call. ●Unable to move specified unavailable for use. A voice/video-phone call or page. Using the i- ppli is stopped by IP PushTalk call cannot be made When an i-motion ticker contains a α (Information service provider). during voice/video-phone calls, link to a site (Web To), etc., in case PushTalk call or 64K data...
Page 479: Warranty And After-Sales Service
Take your FOMA terminal to a repair office read it and checked that it contains the “shop name/ designated by DoCoMo. Be sure to check the date” you purchased it. If it does not contain the opening hours of the repair office before you go.
Page 480: Updating Software
･ Do not modify the FOMA terminal or its responsibility for that. accessories. Also, DoCoMo may, at its option, repair a mobile ･ Fire, injury or damage may result. phone by replacing it. In such an event, it will not ･...
Page 481 (or the server for updating software ● Never remove the battery pack while updating managed by DoCoMo). DoCoMo will not use the software. Update may fail. sent information for any other purpose than ● Software update can be done while various data, software update.
Page 482 Enter the terminal security code Check ■ When updating is not necessary: notice and o If software updating has been found to be unnecessary as a result of checking for the necessity of updating, the screen as shown on the left is displayed. Press o to use FOMA terminal as it is.
Page 483 ■ Automatically reloaded after the When the server is busy: completion of rewriting ･ Select Reserve and reserve a date and After reload, wait while connection is made again to the server. time for update. o after completion of downloading During rewriting, the call indicator flashes.
Page 484 c Select preferred day and time-slot Select preferred day and time Connection is made to the server and the ■ Selecting from the options displayed: options close to preferred day and time-slot Select preferred day and time Select Yes are displayed. ･...
Page 485 (the server for the scan function managed using the other functions. In case the reserved time by DoCoMo). DoCoMo does not use the sent arrives while talking or receiving messages, information for purposes other than the scan updating software starts after finishing talking or function.
Page 486 Select Yes twice Updating pattern definition automatically The pattern definition is updated. Auto-update Setting Updating is performed automatically to maintain the latest pattern definition. m8372 Select Enable Select Yes twice ･ To cancel: Select Select Yes Disable Press o Press o When a new pattern definition is distributed ･...
Page 487: Sar Certification Information
SAR certification information application that may cause troubles. : Continues processing This model phone FOMA D902i meets the MIC’s * of the started technical regulation for exposure to radio waves. application. The technical regulation established permitted levels Detail: Lists names of the...
Page 488 World Health Organization (WHO): http://www.who.int/peh-emf/ ICNIRP: http://www.icnirp.de/ MIC: http://www.soumu.go.jp/english/index.html TELEC: http://www.telec.or.jp/ENG/index_e.html NTT DoCoMo: http://www.nttdocomo.co.jp/product/ (Japanese only) MITSUBISHI ELECTRIC: http://www.MitsubishiElectric.co.jp/d902i/ *1 Ministry of Internal Affairs and Communications *2 The technical regulation is provided in Article 14-2 of the Ministry Ordinance Regulating Radio Equipment.
Page 489 INDEX/Quick Reference Manual INDEX........................488 Quick Reference Manual .................492...
Page 490 INDEX Set for each call....... Set as video-phone substitute Caller ID Request Service ..image........Add Address ......Caller ID Setting ......Settings........Added Service ......Sort ........Camera........Adjust volume ......Still Image Setting/Video Setting Auto focus................337 After-Sales Service....
Page 491 DoCoMo for General Inquiries ... Effects ........Trace display......Driving mode ........ Frames ........Upgrade ......... Moving/copying ...... Use Bar Code Reader.... Dual Network Service ....Paste Text ......Use Camera......Reversing/rotating ....Use infrared communication ..........305 Save from mail .......
Page 492 Setting........My phone number......New Entry (to FOMA terminal) ..........107 Mail List Setting ......My Picture........New Entry (to PushTalk)..Mail Reply Format ..... Deleting ......... New Entry (to UIM) ....Mail Setting (in FOMA terminal) Sort ...................269 Quick Dial ......
Page 493 Reject nuisance caller ....Receive SMS ......Reject/Accept Call...... Save SMS to UIM ....Vibrator Setting ......Setting ........Remote Control ......Sort Criteria ......ppli........α Remote control function ..... View screen ......Video-phone ........ Remote Lock ......Software Update ......Brightness/color density...
Page 494 Quick Reference Manual Use Quick Reference Manual included in this manual as follows. Dotted line Cut along the dotted line. ● Be careful not to hurt yourself when Fold the sheet along the line so that the cutting. front cover is on top.
Page 499: Mobile Phone Etiquette
Mobile phone etiquette When using your FOMA terminal, always be considerate of your environment and those around you. Turn the power off in the following situations ■In prohibited areas Use of mobile phones in the following places is prohibited. You must turn the power off. ・Airplanes ・Hospitals You must also turn the power off when in lobbies or waiting rooms of hospitals as there could be people in such areas who could be adversely affected by mobile phone signals.

Docomo FOMA D902i Manual

Table of Contents

Danger

Before Using D902I

Making/Receiving Video-Phone Calls

Pushtalk

I- Α Ppli

Mobile Wallet/Toruca

Appendix/Data Interchange/ Troubleshooting

Quick Links

Chapters

Need help?

Questions and answers

Related Manuals for Docomo FOMA D902i

Summary of Contents for Docomo FOMA D902i

Table of Contents