Operating the garage door opener transmitter
n
When the garage door opener transmitter is properly installed,
you can operate the transmitter by pushing the button of the
cover.
If a garage door opener transmitter has wire clip for sun visor
n
If the center panel does not touch your garage door opener transmitter
n
To prevent the transmitter from clattering during driving
n
If the transmitter is clattering during driving, fill in a piece of felt or pad.
Push the button.
This clip must be removed prior to adhe-
sion of the fastener.
Check to see if the spacer is on the cor-
l
rect pin.
Attach another spacer to the top of orig-
l
inal
spacer.
required, continue to add spacers until
contact is achieved.
I n f o r ma t i o n P r o v i d e d b y :
3-6. Other interior features
Check
operation.
3
If
345