Operation; Power On/Off; Last Channel Memory - PRESIDENT MC-8000 DSC Owner's Manual

Hide thumbs Also See for MC-8000 DSC:

Table of Contents

Note:

This HEXAGON HEAD BOLT is only for mounting the bracket

with hardware. Do not use it for installing the radio in the

mounting bracket.

Connect the red wire of the supplied power cord to the positive (+)

battery supply. Connect the black wire of the power cord to the nega-

tive (-) battery supply. The power cord is equipped with a fuse to pro-

tect the radio. Use only a six (6) ampere fast blow fuse for replace-

ment. Connect the power cord to the keyed connector on the power

"pigtail".

Connect the antenna and all other auxiliary cables and accesso-

ries.

Install the radio in the mounting bracket and connect all cables

and accessories to the appropriate jacks and connectors.

Note:

Do not use any other mounting knobs than the ones en-

closed. Do not insert the knobs without attaching the

bracket.

Turn the unit On by rotating the PWR/VOL control clockwise.

Adjust the volume to a comfortable level.

When you turn the unit On, you will hear a beep, and the greet-

ing message below appears on the LCD for 3 seconds.

Note:

When you turn On the radio for the first time after purchase, the channel 16 will

appear on the LCD.

The MC-8000 DSC memorizes the last channel selected before you turn Off the radio. For

example, if you turn Off the radio on CH 12, it will be on that channel when turned back On.

Note:

In order for the last channel to be memorized, you must have the radio on that

channel for 3 seconds.

Operation

Table of Contents