Removal And Replacement Of Spray Tube - Hoshizaki KM-251BAH Service Manual

8) Install the new pump, then replace the removed parts in the reverse order of which they
were removed.
9) Turn on the power supply and check for leaks.
10) Replace the panels in their correct positions.
N. Removal and Replacement of Spray Tube
1) Turn off the power supply.
2) Remove the top panel and the insulation panel.
3) Remove the rubber hoses from the spray tube (water supply pipe).
4) Release the clamps, and disconnect the rubber hoses.
5) Remove the spray tube.
6) Install the new spray tube, and replace the removed parts in the reverse order of which
they were removed.
7) Replace the panels in their correct positions.
8) Turn on the power supply.
38