Advertisement
ADDITIONAL SAFETY RULES
FOR CHARGER & BATTERY CARTRIDGE
1 . Do not charge Battery Cartridge when temperature is BELOW 10°C ( 5 O O F )
2. Do not attempt to use a step-up transformer, an engine generator or DC power
3. Do not allow anything to cover or clog the charger vents.
4. Always cover the battery terminals with the battery cover when the battery
5.
Do not short the battery cartridge:
or
ABOVE 4OoC ( 1 0 4 O F ) .
receptacle.
cartridge is not used.
( 1 ) Do
not touch the terminals with any conductive material.
( 2 ) Avoid storing battery cartridge in a container with other metal objects such
(3) Do not expose battery cartridge to water or rain.
a s nails, coins, etc.
A battery short can cause a large current flow, overheating, possible burns
and even a breakdown.
6. Do not store the tool and Battery Cartridge in locations where the tempera-
7 . Do not incinerate the Battery Cartridge even if
it
is severely damaged or is
ture may reach
or
exceed 5OoC ( 1 2 2 O F ) .
completely worn out. The battery cartridge can explode in a fire.
ADDITIONAL SAFETY RULES
1 . Be aware that this tool is always in an operating condition, because
it
does
2. Always be sure you have a firm footing.
3. Hold the tool firmly.
4. Keep hands away from rotating parts.
5 .
When drilling into walls, floors or wherever "live" electrical wires may be
encountered,
DO
NOT TOUCH ANY METAL PARTS OF THE TOOL!
Hold the tool only by the insulated grasping surfaces t o prevent electric shock
if you
drill into a
"live" wire.
not have to be plugged into an electrical outlet.
B e sure no one is below when using the tool in high locations.
6. Do not leave the tool running. Operate the tool only when hand-held.
7 . Do not touch the drill bit
or the workpiece immediately after operation: they
may be extremely hot and could burn your skin.
SAVE THESE INSTRUCTIONS.
5
Advertisement
