Date &Time Settings; Users Settings - Pyle PIPCAM5 Instruction Manual

3.11 Date &Time Settings
Set the date and time for your camera.
Choose the Clock Time zone of your country.
You can choose Sync with NTP Server (Figure 8.3) or Sync with PC Time (Figure 8.4).

3.12 Users Settings

Eight accounts are acceptable for this system. Here you can set the user names and password as
Administrator, Operator or Visitor, with permission for them as below:
Visitor: In this mode, you can only view. (Details 2.7).

 Operator: You can control the direction of IP Camera and set some parameters. (Details 2.8).
 Administrator: You can setup the advanced configurations of the IP Camera. (Details 3.1-3.22).
Figure 8.2
Figure 8.3
Figure 8.4
40