Page 1
Support Straps Mast Clamp Assemblies Support Straps Support Boom Threaded Posts Washers This step is only for models Wing Nuts HBU55, HBU44, and HBU33 1½ -Inch Screws Crossover Wires Splint Wing Nuts UHF/VHF Isolation Network Main Boom Bowtie Lead-In Terminals...
Page 3
FOLLOW THESE RULES AND LIVE WARNING: INSTALLATION OF 1. If you’re not sure about a careful, safe installation—don’t try THIS PRODUCT NEAR to do it yourself. Call your local power company or check with Yellow Pages under “Antennas or Television and Radio Antenna Systems” for an installer in your area. POWERLINES IS DANGEROUS. 2. With at least two people, assemble as much of the antenna on the ground as possible. FOR YOUR SAFETY, FOLLOW THE 3. Watch out for overhead power lines. Check the distance to the power lines before you start installing—WE RECOM- INSTALLATION DIRECTIONS. MEND YOU STAY A MINIMUM OF TWICE THE MAXIMUM LENGTH OF THE ANTENNA AND ITS MAST AWAY FROM ALL POWER LINES.
Page 4
4. IF YOUR MAST DOES NOT HAVE A DANGER LABEL, INSTALL THE SELF-ADHERING DANGER LABEL CHOOSING A STRUCTURE MOUNT PACKAGED IN ANTENNA HARDWARE KIT AT EYE LEVEL ON YOUR MAST. Follow the installation directions for the individual type of mount you choose. ANTENNA GROUNDING UNIVERSAL MAST ANCHOR To protect your house and your TV/FM installation, your BASE AND ROOF MOUNT: Has U-bolt for easy antenna system must be properly grounded.
Need help?
Do you have a question about the HBU55 and is the answer not in the manual?
Questions and answers