large diameter hole, hold the tool firmly with both hands.
start the tool, simply pull the trigger.
Release the trigger to stop.
Reversing switch action
This tool has
reversing switch to change
the direction of rotation. Slide the revers-
ing switch to the right for clockwise rota-
tion or to the left for counterclockwise.
Always check the direction of rotation before operation.
.Use the reversing switch only when the tool comes to
complete stop. Changing the
direction of rotation before the tool stops may ruin the tool.
Drilling in wood
When drilling in wood, best results are obtained with wood drills equipped with
screw. The guide screw makes drilling easier by pulling the bit into the workpiece.
To prevent the bit from slipping when startinga hole, make an indentation with
punch and hammer
the point to be drilled. Place the point of the bit in the indenta-
tion and start drilling.
cutting lubricant when drilling metals. The exceptions are iron and brass which
should be drilled dry.
Drilling in metal