Advertisement
Choosing a location for the Camera
The camera is very flexible, and can be installed practically anywhere. Some of the
things you'll have to consider when choosing a location are -
•
What you want to monitor and where you'll get the best view of it.
•
How you're going to connect the camera to your monitoring system; remember
that cables and connections should be kept out of the weather.
•
How to keep the camera out of harm's way.
Things to consider when placing your camera -
•
Place your camera as close to the area of interest as practicable. The best
position is from about 4m (13ft) above looking slightly down, keeping in mind the
details you are looking for such as faces and vehicle number plates.
•
Although the sky looks nice when you look at the live view from your camera, it
is an unlikely direction for an offender to approach, make sure your camera has
minimal sky in it as the light in daylight can make the foreground of the image
darker.
•
Think about the most likely way a potential offender may approach your home,
use your cameras to give you the best coverage of these areas.
Weather & Tampering
•
The camera's casing is resistant to water, different weather conditions and
tampering. It would take an overwhelming event of this kind to damage the
housing of the camera. However, the cable and connector are vulnerable and
require protection.
•
Even though the camera is weather and water-resistant, prolonged exposure
to adverse weather conditions (direct sunlight or excessive moisture) may
eventually damage the internal components of the camera and adversely
affect its performance. Install the camera in a shady spot!
Positioning the Cables
•
When running your cable, try to avoid bending it at sharp angles.
•
Don't put your cable near live electrical wiring. AC electricity generates radio
"noise" which can interfere with the signal from your camera.
3
Advertisement
