Home >
Fax
>
Voice Operations and Fax Numbers
Send Tone Signals
If you have a Pulse dialing service, but must send Tone signals (for example, for telephone banking), follow these
steps. If you have a Touch Tone service, you will not need this feature to send tone signals.
This feature is available only in Canada.
>> MFC-J460DW/MFC-J480DW/MFC-J485DW
>> MFC-J680DW/MFC-J880DW/MFC-J885DW
MFC-J460DW/MFC-J480DW/MFC-J485DW
1. Press Hook.
2. Press # on the machine's control panel. Any digits dialed after this will send tone signals.
When you are finished with the call, the machine will return to the Pulse dialing service.
MFC-J680DW/MFC-J880DW/MFC-J885DW
1. Press
[Fax].
(MFC-J880DW/MFC-J885DW)
If [Fax Preview] is set to [On], press
2. Press [Hook].
3. Press # on the machine's Touchpanel. Any digits dialed after this will send tone signals.
When you are finished with the call, the machine will return to the Pulse dialing service.
Related Information
•
Voice Operations
>
Voice Operations
[Fax] > [Sending Faxes].
> Send Tone Signals
278