Brother MFC-J460DW Online User's Manual page 581

Level 1 Level 2
WLAN
WLAN Assistant -
Setup Wizard
WPS/AOSS
WPS w/PIN Code -
WLAN Status
MAC Address
Wi-Fi Direct Push Button
PIN Code
Manual
Group Owner
Device Info.
Status Info.
I/F Enable
Web Connect Proxy Settings Proxy
Settings
WLAN Enable -
Network Reset -
Settings > [Print Reports]
Level 1 Descriptions
Transmission Print a Transmission Verification Report for your last transmission.
Address Book Print a list of names and numbers stored in the Address Book.
Fax Journal Print a list of information about your last 200 incoming and outgoing faxes.
(TX means Transmit. RX means Receive.)
User Settings Print a list of your settings.
Level 3 Descriptions
Configure your wireless network settings using the
Brother CD-ROM.
- Configure your internal print server manually.
- Configure your wireless network settings using the one-
button push method.
Configure your wireless network settings using WPS
with a PIN.
Status View the current wireless network status.
Signal View the current wireless network signal strength.
SSID View the current SSID.
Comm. Mode View the current Communication Mode.
- View the machine's MAC address.
- Configure your Wi-Fi Direct network settings using the
one-button push method.
- Configure your Wi-Fi Direct network settings using
WPS with a PIN code.
- Configure your Wi-Fi Direct network settings manually.
- Set your machine as the Group Owner.
Device Name View your machine's device name.
SSID View the Group Owner's SSID.
When the machine is not connected, the LCD displays
Not Connected.
IP Address View your machine's current IP Address.
Status View the current Wi-Fi Direct network status.
Signal View the current Wi-Fi Direct network signal strength.
When your machine acts as Group Owner, the LCD
always indicate a strong signal.
- Turn the Wi-Fi Direct connection on or off.
Change the Web connection settings.
Connection
Address
Port
User Name
Password
- Turn wireless network connection On or Off.
- Restore all network settings back to the factory
settings.
575