Advertisement
Lubrication
This tool i s equipped with an automatic lubrication system, so the chain is lubricated
automatically when the motor is running.
I
Gear
housing
cover
\
I
Window
To replenish the oil, take off the cap on
the tank and fill with the oil supply. The
oil tank capacity i s 170 cc (5.5
oz).
CAUTION :
Turbine oil
#200
or machine oil is recommended. A special oil or one of high viscosity
i s neither needed nor advisable, since the aim is to lubricate the chain and the guide bar.
Do not use dirty oil nor volatile oil.
Switch action
To
prevent the trigger from being acciden-
tally pulled, a lock-off button is provided
as a safety feature.
To start the tool, press in the lock-off
button and pull the trigger. Release the
trigger to stop.
Trigger
switch
I _
r---
Lock-off button
I
CAUTION :
Before plugging in the tool, always check to see that the trigger switch actuates properly
and returns to the "OFF" position when released.
10
Advertisement
