Confirmation Of The Mode - Toshiba e-STUDIO2050C High Security Mode Management Manual

1.THE HIGH SECURITY MODE
 Confirmation of the mode
When this equipment is operated under the high security mode,
equipment.
 The HDD inside the equipment which is operated under the high security mode is encrypted. Moreover,
the Data Overwrite Option (GP-1070) is installed in such equipment.
To confirm that each function is operating, check the display at the top right of the [Counter] screen on
the touch panel of the equipment.
The HDD is encrypted.
The Data Overwrite Enabler is
operating properly.
 When the Data Overwrite Enabler is installed, the hard disk space temporarily used during the job
process will be used for another job after the data are overwritten when the user is logging out.
is displayed on the touch panel of the
The icon is displayed.
The HDD has been encrypted if this equipment is operated
under the high security mode.
The icon showing that the Data Overwrite Enabler is
correctly operating is displayed.
The version of the system which is running is displayed.
The system version to be displayed differs depending on the
equipment which is used.
e-STUDIO2550C Series:
e-STUDIO5055C Series:
e-STUDIO6570C Series:
e-STUDIO507 Series:
e-STUDIO857 Series:
e-STUIDO407CS Series:
e-STUDIO527S Series:
e-STUDIO307LP:
* ISO/IEC15408 certification accession version
Precautions on Using the High Security Mode
1 THE HIGH SECURITY MODE
SYS V4.0
SYS V4.0
SYS V3.0 *
SYS V3.0 *
SYS V3.0 *
SYS V2.0
SYS V2.0
SYS V2.0
7