Toshiba e-studio2555c Quick Start Manual page 25

Density adjustment
You can manually adjust the density by
pressing either or
To lighten the density, press
.
Press [AUTO] to adjust the density
automatically.
By default, density adjustment is set to [AUTO] when
the color mode is "BLACK".
.
, to darken it, press
Bypass copying
1 1
1
Move the paper holding lever
toward the outside and then
paper face down on the bypass tray.
2
Align the side guides to the paper
length and then move the paper
holding lever toward the equipment.
3
1
Press the button corresponding to
the size of paper set on the bypass tray
2
and then [OK].
Press [PAPER TYPE] if the type of the paper you
placed on the bypass tray is other than plain paper.
4
Press the [START] button. Bypass
copying starts.
Basic Copying Operation
2 place
2
23