Makita ANGLE CUTTER 4110C Instruction Manual page 9

1
2
1. Brush holder cap
2. Screwdriver
ACCESSORIES
Use a screwdriver to remove the brush holder caps. Take out
003551
the worn carbon brushes, insert the new ones and secure
the brush holder caps.
To maintain product SAFETY and RELIABILITY, repairs, any
other maintenance or adjustment should be performed by
Makita Authorized or Factory Service Centers, always using
Makita replacement parts.
CAUTION:
• These accessories or attachments are recommended for
use with your Makita tool specified in this manual. The
use of any other accessories or attachments might
present a risk of injury to persons. Only use accessory
or attachment for its stated purpose.
If you need any assistance for more details regarding these
accessories, ask your local Makita service center.
• 255 mm (10") Diamond wheels (Dry type)
• 305 mm (12") Abrasive cut-off wheels
• Socket wrench
• Plastic carrying case
9