Jeep 2015 Wrangler Owner's Manual page 195

4. Disconnect the knuckles from the left and right metal
pivot brackets. Remove the soft top from the vehicle
and store in a clean, dry location.
NOTE: To aid in disconnecting the knuckles, you may
carefully tap on the knuckles using a rubber mallet.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 193
5. Unzip the zipper on the sport bar cover to expose the
pivot brackets. Remove the brackets using a #T30 Torx®
head driver. Recover and re-zip the sports bar cover.
Store the pivot brackets and screws in a safe place.
6. Reinstall the hard top. Refer to "Freedom Top™ Three-
Piece Modular Hard Top — Front/Rear Panel Instal-
lation" in this section.
I n f o r ma t i o n P r o v i d e d b y :
3