PRESONUS StudioLive CS18AI Visual Quickstart Manual page 7

6. Select all five firmware files and either copy/paste or drag them to the root of your thumb drive.
Eject your drive and disconnect it from your computer.
7. Remove your WiFi Lan adapter (if inserted) and insert the thumb drive into the USB slot on the
front of your RM Series mixer (Power on the mixer if it is not already on).
NOTE: In order to control the mixer with UC Surface, you will need either a network connection or a firewire
connection to the mixer. Please refer to the RM mixer manual for details on connecting with UC Surface.
NOTE: After updating your RM mixer firmware to work with the CS18AI the first time you can
also choose to update the RM mixer firmware from the CS18AI. To do this, refer to step 8 of
the CS18AI firmware update instructions in Section 2.0 and then skip to step 9 below.
8. Once you have connected your mixer to your network or computer, open UC Surface and
connect to your RM Mixer. Click the Settings icon at the top right of the UC Surface window
(gears icon). Under the Device Settings Tab, click "Check Firmware Update".
StudioLive CS18AI Visual Quick Start Guide
5