Updating The Cs18Ai Controller Firmware - PRESONUS StudioLive CS18AI Visual Quickstart Manual

Updating the CS18AI controller firmware

1
1. Download the firmware files for your mixer from your MyPresonus account.
To find these files, click on the "See Details" link on your StudioLive registration
and click the "Firmware" tab in the details area.
IMPORTANT: StudioLive CS18AI and StudioLive AI Console and RM mixers
each use different firmware files. Loading the wrong firmware can cause the
mixer to function improperly and can potentially damage the unit.
2. Open your Downloads folder and locate the StudioLive firmware folder. The
folder will be named with your mixer's model number and the new firmware
version (e.g., CS18AI_v1234).
3. Depending on your system preferences, the firmware .zip archive file might
not automatically decompress. To expand the .zip archive, simply double-click
it.
4. Open the firmware folder; you will find five files inside. You will need all five
files to upgrade your controller.
- Initvars.scr
- Recovery.scr
- Rootfs.img
- uImage
- upgrade.bin
5. Connect a FAT32-formatted USB thumb drive to your computer.
Power User Tip: Most small USB drives (16 GB or less) should be formatted correctly,
but if your controller does not detect your thumb drive at first, we suggest reformatting
it, even if it's already formatted as FAT32. On Windows, be sure to do a "Full" format as
opposed to a "Quick" format. On Macs, the choice will be listed as MS-DOS (FAT). Please
refer to the list of suggested drives that can be found on our Knowledge Base.
StudioLive CS18AI Visual Quick Start Guide
1